Environmental Performance of rawashin in the Traditional Hijazi Houses of Historic Jeddah: A Comparative Simulation Study of Beit Al-Sharbatly and Beit Baeshen

Environmental Performance of rawashin in the Traditional Hijazi Houses of Historic Jeddah: A Comparative Simulation Study of Beit Al-Sharbatly and Beit Baeshen

Nermine ABDEL GELIL MOHAMED, Shrouq ALRASHIDI, Alhanoof FAHAD, Ahmed ALQASIMI, Hassan MOSTAFA

Abstract. Traditional architecture in hot-arid regions embodies generations of passive environmental design knowledge. In Historic Jeddah, a UNESCO World Heritage Site, wooden lattice screens known as rawashin are a defining feature of Hijazi architecture. This study investigates the environmental performance of rawashin in two traditional houses, Beit Al-Sharbatly and Beit Baeshen, using building performance simulation tools. The analysis examined four parameters: thermal comfort (operative temperature, Predicted Mean Vote PMV and Predicted Percentage of Dissatisfied PPD); solar heat gains through windows; daylighting (Daylight Factor and illuminance distribution); and natural ventilation (air changes per hour ACH and airflow velocity). Both buildings were compared with and without rawashin. It was shown that rawashin positively affect building performance with respect to each of the selected parameters. In particular, rawashin contribute to the decrease of solar gains from 25% up to 71%, as well as lowering indoor operative temperature by approximately 1.1°С in extreme summer conditions, decreasing PMV and PPD scores by 0.53 and 4.9% correspondingly; however, the environment in the building remains uncomfortable. Also, rawashin reduced the maximum Daylight Factor from 24% – 27% down to 10% – 22%; thus, more uniform daylighting and glare avoidance are achieved, while deep spaces experience insignificant effect. Rawashin do not limit air flow (ACH=1.5-2.85). The findings obtained are relevant for both studied buildings despite their different designs.

Keywords
Rawashin, Rawashin, Mashrabiyya, Hijazi Architecture, Historic Jeddah, Building Performance Simulation, Thermal Comfort, Daylighting, Natural Ventilation, Passive Cooling, Vernacular Architecture, Saudi Arabia

Published online 10/5/2026, 14 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Nermine ABDEL GELIL MOHAMED, Shrouq ALRASHIDI, Alhanoof FAHAD, Ahmed ALQASIMI, Hassan MOSTAFA, Environmental Performance of rawashin in the Traditional Hijazi Houses of Historic Jeddah: A Comparative Simulation Study of Beit Al-Sharbatly and Beit Baeshen, Materials Research Proceedings, Vol. 72, pp 50-63, 2026

DOI: https://doi.org/10.21741/9781644904336-6

The article was published as article 6 of the book Smart and Sustainable Architecture and Urban Resilience

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] Basunbul, A.I. and W.W. Braham, Climate responsive lessons from an architectural and ethnographic study of Hijazi traditional dwellings in Jeddah, Saudi Arabia, Frontiers in Built Environment 9 (2023) 1127615. https://doi.org/10.3389/fbuil.2023.1127615.
[2] GhaffarianHoseini, A., U. Berardi, and A. GhaffarianHoseini, Sustainable energy performances of green buildings: A review of current theories, implementations and challenges, Renewable and Sustainable Energy Reviews 25 (2013) 1-17. https://doi.org/10.1016/j.rser.2013.01.010.
[3] Alelwani, R., et al., Optimising energy efficiency and daylighting performance for designing vernacular architecture—A case study of Rawshan, Sustainability 17 (2025) 315. https://doi.org/10.3390/su17010315.
[4] Unesco World Heritage Centre, Historic Jeddah, the Gate to Makkah, 2014. https://whc.unesco.org/en/list/1361/ (accessed September 2025).
[5] Attia, M., Sustainability features of Jeddah traditional housing, in: (Eds.), Sustainability in Urban Planning and Design, IntechOpen, 2021, pp. 77351. https://doi.org/10.5772/intechopen.98735.
[6] Bagader, M., Climate adaptability in the Hejazi traditional architecture, International Journal of Heritage Architecture 1 (2017) 559-570. https://doi.org/10.2495/HA-V1-N4-559-570.
[7] Fathy, H., Natural energy and vernacular architecture: Principles and examples with reference to hot arid climates, ed., University of Chicago Press, 1986.
[8] Abdel Gelil Mohamed, N., E. Hamid Abd El-Rahman, and M. Sadek, A smart green mashrabiyya-shutter design for residential applications in Egypt, HBRC Journal 19 (2023) 229-252. https://doi.org/10.1080/16874048.2023.2259629.
[9] Bagasi, A.A., J.K. Calautit, and A.S. Karban, Evaluation of the integration of the traditional architectural element Mashrabiyya into the ventilation strategy for buildings in hot climates, Energies 14 (2021) 530. https://doi.org/10.3390/en14030530.
[10] Alardhi, A., A.S. Alaboodi, and R. Almasri, Impact of the new Saudi energy conservation code on Saudi Arabia residential buildings, Australian Journal of Mechanical Engineering 20 (2022) 52-63. https://doi.org/10.1080/14484846.2020.1802919.
[11] Bodach, S., W. Lang, and J. Hamhaber, Climate responsive building design strategies of vernacular architecture in Nepal, Energy and Buildings 81 (2014) 227-242. https://doi.org/10.1016/j.enbuild.2014.06.022.
[12] Sirror, H., Lessons learned from the past: Tracing sustainable strategies in the architecture of Al-Ula Heritage Village, Sustainability 16 (2024) 5463. https://doi.org/10.3390/su16135463.
[13] Mohamed, M.A.E.H., A. Klingmann, and H. Samir, Examining the thermal performance of vernacular houses in Asir Region of Saudi Arabia, Alexandria Engineering Journal 58 (2019) 419-428. https://doi.org/10.1016/j.aej.2019.03.004.
[14] Chandel, S.S., V. Sharma, and B.M. Marwah, Review of energy efficient features in vernacular architecture for improving indoor thermal comfort conditions, Renewable and Sustainable Energy Reviews 65 (2016) 459-477. https://doi.org/10.1016/j.rser.2016.07.038.
[15] Vellinga, M., Vernacular architecture and sustainability: Two or three lessons, in: F.V. C. Mileto, L. García Soriano, V. Cristini (Eds.), Vernacular Architecture: Towards a Sustainable Future, CRC Press, 2015, pp. 3-8. https://doi.org/https://doi.org/10.1201/b17393-5.
[16] Nyazi, G. and Ö. Sağıroğlu, The traditional coral stone buildings of the Red Sea coast: Case study of historic Jeddah, Gazi University Journal of Science Part B: Art, Humanities, Design and Planning 6 (2018) 159-165. https://doi.org/https://dergipark.org.tr/en/download/article-file/624547.
[17] Bagader, M. and M. Mohamed, A Comparison Study for the Thermal and Physical Properties between “Al-Mangabi” and the Available Building Materials for the External Walls in Jeddah, International Journal of Engineering Research and Technology 13) 1319-1329. https://doi.org/https://www.ripublication.com/irph/ijert20/ijertv13n6_33.pdf.
[18] Aldersoni, A., et al., The impact of passive strategies on the overall energy performance of traditional houses in the Kingdom of Saudi Arabia, Buildings 12 (2022) 1837. https://doi.org/10.3390/buildings12111837.
[19] Elwan, M., The role of traditional lattice window “Mashrabiyya” in delivering single-sided ventilation—A CFD study, SSRG International Journal of Engineering Trends and Technology 68 (2020) 146-153. https://doi.org/10.14445/22315381/IJETT-V68I9P221.
[20] Ben Bacha, C. and F. Bourbia, Simulation-based performance evaluation of kinetic Mashrabiyya for thermal comfort and energy efficiency in arid climates: A case study in Biskra, Algeria, Budownictwo i Architektura 24 (2025). https://doi.org/10.35784/bud-arch.7102.
[21] Rehman, A. and A. Surapaneni, Multi-objective optimization of Indian Jaali fenestration system for visual, thermal and perceptual performance using computational methods, in: IBPSA (Eds.), Proceedings of Building Simulation 2021: 17th Conference of IBPSA, Year, pp. 2523 – 2528. https://doi.org/10.26868/25222708.2021.30453.
[22] Taki, A. and H. Kumari, Examining Mashrabiyya’s impact on energy efficiency and cultural aspects in Saudi Arabia, Sustainability 15 (2023) 10131. https://doi.org/10.3390/su151310131.
[23] Bagasi, A.A., J.K. Calautit, and A.S. Karban, Experimental field study of the integration of passive and evaporative cooling techniques with Mashrabiyya in hot climates, Energy and Buildings 225 (2020) 110325. https://doi.org/10.1016/j.enbuild.2020.110325.
[24] Crawley, D.B., et al., EnergyPlus: Creating a new-generation building energy simulation program, Energy and Buildings 33 (2001) 319-331. https://doi.org/10.1016/S0378-7788(00)00114-6.
[25] Ashrae, ANSI/ASHRAE Standard 55-2020: Thermal environmental conditions for human occupancy, 2020, American Society of Heating, Refrigerating and Air-Conditioning Engineers.
[26] ISO, ISO 7730:2005 Ergonomics of the thermal environment – Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria, 2005, International Organization for Standardization.
[27] Van Hoof, J., Forty years of Fanger’s model of thermal comfort: Comfort for all?, Indoor Air 18 (2008) 182-201. https://doi.org/10.1111/j.1600-0668.2007.00516.x.
[28] Fanger, P.O. and J. Toftum, Extension of the PMV model to non-air-conditioned buildings in warm climates, Energy and Buildings 34 (2002) 533-536. https://doi.org/10.1016/S0378-7788(02)00003-8.
[29] Cheung, T., et al., Analysis of the accuracy on PMV–PPD model using the ASHRAE Global Thermal Comfort Database II, Building and Environment 153 (2019) 205-217. https://doi.org/10.1016/j.buildenv.2019.01.055.
[30] Ramponi, R. and B. Blocken, CFD simulation of cross-ventilation for a generic isolated building: Impact of computational parameters, Building and Environment 53 (2012) 34-48. https://doi.org/10.1016/j.buildenv.2012.01.004.
[31] Van Hooff, T., B. Blocken, and Y. Tominaga, On the accuracy of CFD simulations of cross-ventilation flows for a generic isolated building: Comparison of RANS, LES and experiments, Building and Environment 114 (2017) 148-165. https://doi.org/10.1016/j.buildenv.2016.12.019.
[32] Meteoblue. Climate (modelled): Jeddah, Saudi Arabia. (accessed October 2025; Available from: https://www.meteoblue.com/en/weather/historyclimate/climatemodelled/jeddah_saudi-arabia_105343.
[33] Society of Building Science Educators. Climate Consultant. 2021 (accessed October 2025; Available from: https://www.sbse.org/resources/climate-consultant.
[34] Mohamed, M. and R. Shawesh, Assessment of Outdoor Thermal Comfort in Hot Arid Zone, Journal of Urban and Environmental Engineering 15 (2021) 10-23. https://doi.org/10.4090/juee.2021.v15n1.010023.
[35] ASHRAE, Addendum p to ANSI/ASHRAE Standard 62.1-2013: Ventilation for acceptable indoor air quality, 2015, American Society of Heating, Refrigerating and Air-Conditioning Engineers: Atlanta.
[36] Launder, B.E. and D.B. Spalding, The numerical computation of turbulent flows, Computer Methods in Applied Mechanics and Engineering 3 (1974) 269-289. https://doi.org/10.1016/0045-7825(74)90029-2.
[37] Jomehzadeh, F., et al., Natural ventilation by windcatcher (Badgir): A review on the impacts of geometry, microclimate and macroclimate, Energy and Buildings 226 (2020) 110396. https://doi.org/10.1016/j.enbuild.2020.110396.