Balancing Daylighting and Thermal Control: Experimental Analysis of Window Films under Saudi Climatic Conditions
Chuloh JUNG, Jamal F. NAYFEH, Salma Khalid AL SUWAIGH, Sonia Valeria Pereira SEIXAS
Abstract. This study investigates the optical performance of eight commercially available solar control window films (SCWFs) to assess their applicability for retrofitting building façades in Saudi Arabia’s hot-arid climate. Spectral transmittance and reflectance measurements were conducted using a high-resolution spectroradiometer under simulated solar conditions. Results show significant variation in performance among the films, with Products B and C demonstrating optimal balance, reducing infrared transmittance by approximately 85% while maintaining visible light transmittance near 55%. Reflectance analysis across multiple angles of incidence confirmed that high-performing mirrored films increased glare potential, while Products B and C maintained moderate angular reflectivity suitable for dense urban environments. The findings emphasize that film selection should consider energy efficiency and visual comfort. This research supports the integration of SCWFs into national retrofitting strategies, aligning with Saudi Vision 2030 and building code requirements, and highlights the need for simulation-based design tools that incorporate local climate and building typologies.
Keywords
Solar Control Window Films, Building Energy Efficiency, Hot-Arid Climate Retrofit, Optical Performance Analysis, Sustainable Building Envelope
Published online 10/5/2026, 10 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Chuloh JUNG, Jamal F. NAYFEH, Salma Khalid AL SUWAIGH, Sonia Valeria Pereira SEIXAS, Balancing Daylighting and Thermal Control: Experimental Analysis of Window Films under Saudi Climatic Conditions, Materials Research Proceedings, Vol. 72, pp 40-49, 2026
DOI: https://doi.org/10.21741/9781644904336-5
The article was published as article 5 of the book Smart and Sustainable Architecture and Urban Resilience
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Min, J., Yan, G., Abed, A. M., Elattar, S., Khadimallah, M. A., Jan, A., & Ali, H. E. (2022). The effect of carbon dioxide emissions on the building energy efficiency. Fuel, 326, 124842. https://doi.org/10.1016/j.fuel.2022.124842
[2] Liu, Z., Yu, C., Qian, Q. K., Huang, R., You, K., Visscher, H., & Zhang, G. (2023). Incentive initiatives on energy-efficient renovation of existing buildings towards carbon–neutral blueprints in China: Advancements, challenges and prospects. Energy and Buildings, 296, 113343. https://doi.org/10.1016/j.enbuild.2023.113343
[3] Elavarasan, R. M., Mudgal, V., Selvamanohar, L., Wang, K., Huang, G., Shafiullah, G. M., … & Nadarajah, M. (2022). Pathways toward high-efficiency solar photovoltaic thermal management for electrical, thermal and combined generation applications: A critical review. Energy Conversion and management, 255, 115278. https://doi.org/10.1016/j.enconman.2022.115278
[4] El Samanoudy, G., Mahmoud, N. S. A., & Jung, C. (2024). Analyzing the effectiveness of building integrated Photovoltaics (BIPV) to reduce the energy consumption in Dubai. Ain Shams Engineering Journal, 15(5), 102682. https://doi.org/10.1016/j.asej.2024.102682
[5] Xiong, J., Guo, S., Wu, Y., Yan, D., Xiao, C., & Lu, X. (2023). Predicting the response of heating and cooling demands of residential buildings with various thermal performances in China to climate change. Energy, 269, 126789. https://doi.org/10.1016/j.energy.2023.126789
[6] Brito-Coimbra, S., Aelenei, D., Gloria Gomes, M., & Moret Rodrigues, A. (2021). Building façade retrofit with solar passive technologies: A literature review. Energies, 14(6), 1774. https://doi.org/10.3390/en14061774
[7] Li, X., & Wu, Y. (2025). A review of complex window-glazing systems for building energy saving and daylight comfort: Glazing technologies and their building performance prediction. Journal of Building Physics, 48(4), 496-540. https://doi.org/10.1177/17442591241269182
[8] Riahinezhad, M., Hallman, M., & Masson, J. F. (2021). Critical review of polymeric building envelope materials: degradation, durability and service life prediction. Buildings, 11(7), 299. https://doi.org/10.3390/buildings11070299
[9] Jahid, M. A., Wang, J., Zhang, E., Duan, Q., & Feng, Y. (2022). Energy savings potential of reversible photothermal windows with near infrared-selective plasmonic nanofilms. Energy Conversion and Management, 263, 115705. https://doi.org/10.1016/j.enconman.2022.115705
[10] Nasrollahzadeh, N. (2021). Comprehensive building envelope optimization: Improving energy, daylight, and thermal comfort performance of the dwelling unit. Journal of Building Engineering, 44, 103418. https://doi.org/10.1016/j.jobe.2021.103418
[11] Al-Tamimi, N. (2022). Building envelope retrofitting strategies for energy-efficient office buildings in Saudi Arabia. Buildings, 12(11), 1900. https://doi.org/10.3390/buildings12111900
[12] Khan, M. I., Bicer, Y., Asif, M., Al-Ansari, T. A., Khan, M., Kurniawan, T. A., & Al-Ghamdi, S. G. (2024). The GCC’s path to a sustainable future: Navigating the barriers to the adoption of energy efficiency measures in the built environment. Energy Conversion and Management: X, 100636. https://doi.org/10.1016/j.ecmx.2024.100636
[13] Saha, B., Saha, A., Das, P., Kakati, A., Banerjee, A., & Chattopadhyay, P. (2024). A comprehensive review of ultraviolet radiation and functionally modified textile fabric with special emphasis on UV protection. Heliyon. https://doi.org/10.1016/j.heliyon.2024.e40027
[14] Jung, C., & Awad, J. (2023). Sharjah sustainable city: an analytic hierarchy process approach to urban planning priorities. Sustainability, 15(10), 8217. https://doi.org/10.3390/su15108217
[15] Shree, V., Goyal, N., Saxena, A., Bhattacharyya, S., Dwivedi, A., & Goel, V. (2023). Assessment of thermal loading in energy-efficient buildings: Parametric review on the window design aspects. Journal of Thermal Analysis and Calorimetry, 148(7), 2703-2718. https://doi.org/10.1007/s10973-022-11815-5
[16] Ming, Y., Sun, Y., Liu, X., Liu, X., & Wu, Y. (2024). Thermal performance of an advanced smart fenestration systems for low-energy buildings. Applied Thermal Engineering, 244, 122610. https://doi.org/10.1016/j.applthermaleng.2024.122610
[17] Khourchid, A. M., Ajjur, S. B., & Al-Ghamdi, S. G. (2022). Building cooling requirements under climate change scenarios: Impact, mitigation strategies, and future directions. Buildings, 12(10), 1519. hhttps://doi.org/10.3390/buildings12101519
[18] Jung, C., & Mahmoud, N. S. A. (2022). Extracting the critical points of formaldehyde (HCHO) emission model in hot desert climate. Air, Soil and Water Research, 15, 11786221221105082. https://doi.org/10.1177/1178622122110508
[19] Hosseini, M., Javanroodi, K., & Nik, V. M. (2022). High-resolution impact assessment of climate change on building energy performance considering extreme weather events and microclimate–Investigating variations in indoor thermal comfort and degree-days. Sustainable Cities and Society, 78, 103634. https://doi.org/10.1016/j.scs.2021.103634
[20] Zahir, M. H., Irshad, K., Shafiullah, M., Ibrahim, N. I., Islam, A. K., Mohaisen, K. O., & Sulaiman, F. A. A. (2023). Challenges of the application of PCMs to achieve zero energy buildings under hot weather conditions: A review. Journal of Energy Storage, 64, 107156. https://doi.org/10.1016/j.est.2023.107156
[21] Abdelaziz Mahmoud, N. S., & Jung, C. (2023). Analyzing the bake-out effect in winter for the enhancement of indoor air quality at new apartments in UAE. Buildings, 13(4), 846. https://doi.org/10.3390/buildings13040846
[22] Li, W., Abd El-Samie, M. M., Zhao, S., Lin, J., Ju, X., & Xu, C. (2021). Division methods and selection principles for the ideal optical window of spectral beam splitting photovoltaic/thermal systems. Energy Conversion and Management, 247, 114736. https://doi.org/10.1016/j.enconman.2021.114736
[23] Garduño, Z., Daza, L. G., Iribarren, A., & Castro-Rodríguez, R. (2025). Enhanced optical properties of aluminum-doped zinc oxide thin films fabricated via twist substrate-assisted glancing angle deposition. Applied Surface Science, 698, 163080. https://doi.org/10.1016/j.apsusc.2025.163080
[24] Zhu, Z., Lu, H., Zhao, W., & Chang, X. (2023). Materials, performances and applications of electric heating films. Renewable and Sustainable Energy Reviews, 184, 113540. https://doi.org/10.1016/j.rser.2023.113540
[25] Zhao, Y., Feng, Y., Duan, Q., Wang, N., Hinkle, L. E., Zhang, E., … & Wang, J. (2021). Research methods for assessing the thermal and optical performance of building windows. Research Methods in Building Science and Technology, 1-31. https://doi.org/10.1007/978-3-030-73692-7_1
[26] Jung, C., Sami Abdelaziz Mahmoud, N., & El Samanoudy, G. (2025). Overcooling in UAE homes: Health issues and implications for learning efficiency. Architectural Science Review, 68(2), 120-133. https://doi.org/10.1080/00038628.2024.2360910
[27] Jamoussi, B., Abu-Rizaiza, A., & AL-Haij, A. (2022). Sustainable building standards, codes and certification systems: The status quo and future directions in Saudi Arabia. Sustainability, 14(16), 10314. https://doi.org/10.3390/su141610314

