Adaptive Façade System for Hot Arid Climates: Material and Cultural Integration for Madinah

Adaptive Façade System for Hot Arid Climates: Material and Cultural Integration for Madinah

Aisha HASSAN, Ethar ALAWAD, Shorouq ALSIRHANI, Maha M. HASSAN

Abstract. Adaptive façade systems have recently gained increased attention as a sustainable approach to reduce building energy consumption and counter overheating problems. Despite this, most smart systems focus mainly on static solutions rather than dynamic ones that adapt to changing environmental conditions. A study is initiated to investigate alternatives for dynamic façade systems suitable for hot arid climate in Saudi Arabia. In the current study, available adaptive façade technologies are explored and assessed in light of architectural and material constraints. Findings are expected to guide the development of a movable façade system prototype.

Keywords
Adaptive Façade Systems, Dynamic Façades, Cultural Integration, Madinah Architecture

Published online 10/5/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Aisha HASSAN, Ethar ALAWAD, Shorouq ALSIRHANI, Maha M. HASSAN, Adaptive Façade System for Hot Arid Climates: Material and Cultural Integration for Madinah, Materials Research Proceedings, Vol. 72, pp 442-449, 2026

DOI: https://doi.org/10.21741/9781644904336-43

The article was published as article 43 of the book Smart and Sustainable Architecture and Urban Resilience

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] A. Balali and A. Valipour, “Identification and selection of building façade smart materials according to sustainable development goals,” Sustainable Materials and Technologies, vol. 26, p. e00213, 2020. https://doi.org/10.1016/j.susmat.2020.e00213.
[2] F. Tahmasbi, A. I. Khdair, G. A. Aburumman, M. Tahmasebi, N. H. Thi, and M. Afrand, “Energy-efficient building façades: A comprehensive review of innovative technologies and sustainable strategies,” Journal of Building Engineering, 2025. https://doi.org/10.1016/j.jobe.2024.111643.
[3] O. Imghoure, A. Zaite, N. Belouaggadia, M. Ezzine, and R. Lbibb, “Smart wall incorporating a composite based on sisal fiber and phase change material,” in Proc. 3rd Int. Conf. Innovative Research in Applied Science, Engineering and Technology (IRASET), 2023. https://doi.org/10.1109/IRASET57153.2023.10152996.
[4] M. Wang, Z. Jia, L. Tao, and C. Xiang, “Review of dynamic façade typologies, physical performance, and control methods: Towards smarter and cleaner zero-energy buildings,” Journal of Building Engineering, vol. 98, 2024. https://doi.org/10.1016/j.jobe.2024.111310.
[5] S. M. Hosseini, M. Mohammadi, and O. Guerra-Santin, “Interactive kinetic façade: Improving visual comfort based on dynamic daylight and occupants’ positions,” Building and Environment, vol. 165, p. 106396, 2019. https://doi.org/10.1016/j.buildenv.2019.106396.
[6] L. Akimov, A. Bezborodov, and V. Badenko, “Example-based dynamic façade design using the façade daylighting performance improvement (FDPI) indicator,” Building Simulation, vol. 16, no. 12, pp. 2261–2283, 2023. https://doi.org/10.1007/s12273-023-1073-6.
[7] D. S. Panya, T. Kim, and S. Choo, “A methodology of interactive motion façades design through parametric strategies,” Applied Sciences, vol. 10, no. 4, p. 1218, 2020. https://doi.org/10.3390/app10041218.
[8] G. M. Mohammad et al., “Using multi-layer façade systems to increase building energy efficiency: A systematic review of thermal, daylighting, and ventilation performance,” Journal of Al-Azhar University Engineering Sector, vol. 19, no. 72, pp. 582–604, 2024. https://doi.org/10.21608/auej.2024.267349.1612.
[9] M. Rossi, “Innovative façades: Lightweight and thin systems with high inertia for thermal comfort,” Journal of Green Building, vol. 6, no. 2, pp. 107–121, 2011. https://doi.org/10.3992/jgb.6.2.107.
[10] I. Paoletti and M. Nastri, Executive design of façade systems. Cham: Springer, 2024. https://doi.org/10.1007/978-3-031-44893-5.
[11] M. Nastri, “Building envelope engineering and typologies for complex architectures,” in IRC 2022 Proc., 2022, pp. 3–20.
[12] Y. Nasr et al., “Comprehensive review of innovative materials for sustainable building energy performance,” Energies, vol. 16, no. 21, p. 7440, 2023. https://doi.org/10.3390/en16217440.
[13] G. M. Avinç et al., “Biomimetic façade design proposal to improve thermal comfort in hot climates,” International Journal of Built Environment and Sustainability, vol. 11, no. 2, pp. 27–39, 2024. https://doi.org/10.11113/ijbes.v11.n2.1226.
[14] A. Karanouh and E. Kerber, “Innovations in dynamic architecture,” Journal of Facade Design and Engineering, vol. 3, no. 2, pp. 185–221, 2015. https://doi.org/10.3233/fde-150040.
[15] S. M. Saste et al., “Adaptive façade systems for energy-efficient and sustainable buildings: A review,” International Scientific Journal of Engineering and Management, 2025. https://doi.org/10.55041/isjem04834.
[16] M. Rüggeberg and I. Burgert, “Bio-inspired wooden actuators for large-scale applications,” PLoS One, vol. 10, no. 4, p. e0120718, 2015. https://doi.org/10.1371/journal.pone.0120718.
[17] “Recommended specification for manufacture, curing and testing of glassfibre reinforced concrete (GRC) products,” 2002.
[18] “FRP vs. traditional materials,” MatWeb. [Online]. Available: www.matweb.com
[19] Fawaasil Company, “Foam concrete material datasheet,” 2025. [Online]. Available: https://fawaasil.com/
[20] R. Alelwani et al., “Rawshan: Environmental impact of a vernacular shading element,” in IEEE ICE/ITMC, 2019. https://doi.org/10.1109/ICE.2019.8792589.
[21] H. Fathy, Natural energy and vernacular architecture. Chicago: University of Chicago Press, 1985.
[22] R. Alelwani et al., “Optimising energy efficiency and daylighting performance in vernacular architecture: A Rawshan case study,” Sustainability, vol. 17, no. 1, p. 315, 2025. https://doi.org/10.3390/su17010315.
[23] E. T. Yalaz et al., “Lifetime performance evaluation of curtain wall systems,” Construction and Building Materials, vol. 170, pp. 254–271, 2018. https://doi.org/10.1016/j.conbuildmat.2018.03.061.
[24] B. Huang et al., “Seismic performance of curtain wall systems: A review,” Soil Dynamics and Earthquake Engineering, vol. 100, pp. 16–33, 2017. https://doi.org/10.1016/j.soildyn.2017.05.025.
[25] C. Bedon et al., “Performance of structural glass façades under extreme loads,” Construction and Building Materials, vol. 163, pp. 921–937, 2018. https://doi.org/10.1016/j.conbuildmat.2017.12.153.
[26] Madinah Region Development Authority, “Building requirements and regulations in Madinah,” Saudi Arabia, 2023.
[27] G. Dev and A. Saifudeen, “Dynamic façade control systems for optimal daylighting,” Sustainability Analytics and Modeling, vol. 3, p. 100018, 2023. https://doi.org/10.1016/j.samod.2023.100018.