Optimizing Fenestration Strategies for Residential Energy Reduction: A Comparative Study of Five Climatic Zones
Chuloh JUNG, Jamal F. NAYFEH, Zeeshan Jawed SHAH, Salma Khalid AL SUWAIGH
Abstract. This study investigates the impact of window design parameters—specifically window-to-wall ratio (WWR), orientation, and glazing performance—on the annual energy consumption of residential buildings across five climatic regions, focusing on Saudi Arabia’s hot-arid environment. A parametric analysis was conducted using COMFEN 5.0.33 simulation software to evaluate cooling and lighting energy demands under varying WWR configurations (25%, 50%, and 75%) and four cardinal orientations. Results indicate that increasing the WWR to 75% in Riyadh led to a 42% rise in annual energy use, predominantly due to increased cooling loads. Tehran showed dual seasonal sensitivity, while tropical locations such as Singapore exhibited consistently high cooling demand across all orientations. The findings emphasize the need for region-specific, performance-based window design strategies to optimize thermal performance and visual comfort. This research supports energy efficiency targets outlined in Saudi Vision 2030 and highlights simulation as a critical tool for sustainable housing design in climate-sensitive regions.
Keywords
Window-to-Wall Ratio, Energy-Efficient Housing, Hot-Arid Climate Design, Building Energy Simulation, Fenestration Performance
Published online 10/5/2026, 9 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Chuloh JUNG, Jamal F. NAYFEH, Zeeshan Jawed SHAH, Salma Khalid AL SUWAIGH, Optimizing Fenestration Strategies for Residential Energy Reduction: A Comparative Study of Five Climatic Zones, Materials Research Proceedings, Vol. 72, pp 423-431, 2026
DOI: https://doi.org/10.21741/9781644904336-41
The article was published as article 41 of the book Smart and Sustainable Architecture and Urban Resilience
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Fakhabi, M. M., Hamidian, S. M., & Aliehyaei, M. (2024). Exploring the role of the Internet of Things in green buildings. Energy Science & Engineering, 12(9), 3779-3822. https://doi.org/10.1002/ese3.1840
[2] Min, J., Yan, G., Abed, A. M., Elattar, S., Khadimallah, M. A., Jan, A., & Ali, H. E. (2022). The effect of carbon dioxide emissions on the building energy efficiency. Fuel, 326, 124842. https://doi.org/10.1016/j.fuel.2022.124842
[3] Zhong, X., Hu, M., Deetman, S., Steubing, B., Lin, H. X., Hernandez, G. A., … & Behrens, P. (2021). Global greenhouse gas emissions from residential and commercial building materials and mitigation strategies to 2060. Nature Communications, 12(1), 6126. https://doi.org/10.1038/s41467-021-26212-z
[4] Kutty, N. A., Barakat, D., Darsaleh, A. O., & Kim, Y. K. (2023). A systematic review of climate change implications on building energy consumption: impacts and adaptation measures in hot urban desert climates. Buildings, 14(1), 13. https://doi.org/10.3390/buildings14010013
[5] El Samanoudy, G., Mahmoud, N. S. A., & Jung, C. (2024). Analyzing the effectiveness of building integrated Photovoltaics (BIPV) to reduce the energy consumption in Dubai. Ain Shams Engineering Journal, 15(5), 102682. https://doi.org/10.1016/j.asej.2024.102682
[6] Yang, Y., & Chen, S. (2022). Thermal insulation solutions for opaque envelope of low-energy buildings: A systematic review of methods and applications. Renewable and Sustainable Energy Reviews, 167, 112738. https://doi.org/10.1016/j.rser.2022.112738
[7] Shree, V., Goyal, N., Saxena, A., Bhattacharyya, S., Dwivedi, A., & Goel, V. (2023). Assessment of thermal loading in energy-efficient buildings: Parametric review on the window design aspects. Journal of Thermal Analysis and Calorimetry, 148(7), 2703-2718. https://doi.org/10.1007/s10973-022-11815-5
[8] William, M. A., Suárez‐López, M. J., Soutullo, S., & Hanafy, A. A. (2021). Building envelopes toward energy‐efficient buildings: A balanced multi‐approach decision making. International journal of energy research, 45(15), 21096-21113. https://doi.org/10.1002/er.7166
[9] Ming, Y., Sun, Y., Liu, X., Liu, X., & Wu, Y. (2024). Thermal performance of an advanced smart fenestration systems for low-energy buildings. Applied Thermal Engineering, 244, 122610. https://doi.org/10.1016/j.applthermaleng.2024.122610
[10] Mucedero, G., & Monteiro, R. (2024). An integrated regional prioritisation framework for seismic and energy-efficiency performance upgrading of residential buildings. International Journal of Disaster Risk Reduction, 103, 104341. https://doi.org/10.1016/j.ijdrr.2024.104341
[11] Jung, C., El Samanoudy, G., Alqassimi, N., & Sherzad, M. (2023). Assessing the impact of ventilation systems on indoor air quality: a mock-up experiment in Dubai. Frontiers in Built Environment, 9, 1286053. https://doi.org/10.3389/fbuil.2023.1286053
[12] Almulhim, A. I., & Cobbinah, P. B. (2023). Can rapid urbanization be sustainable? The case of Saudi Arabian cities. Habitat International, 139, 102884. https://doi.org/10.1016/j.habitatint.2023.102884
[13] Ahmad, A., Bande, L., Ahmed, W., Tabet Aoul, K., & Jha, M. (2025). Parametric Optimization and Assessment of Modern Heritage Shading Screen for a Mid-Rise Building in Arid Climate: Modernizing Traditional Designs. Buildings, 15(7), 1148. https://doi.org/10.3390/buildings15071148
[14] Kaitouni, S. I., Pfafferott, J., Jamil, A., Ahachad, M., & Brigui, J. (2023). A holistic digital workflow methodology to shifting towards net zero energy urban residential buildings in a semi-arid climate. Solar Energy, 263, 111959. https://doi.org/10.1016/j.solener.2023.111959
[15] Qiu, Z., Yong, Q., Wang, J., Liao, L., & Yu, B. (2024). A multi-objective optimization framework for performance-based building design considering the interplay between buildings and urban environments. Energy Conversion and Management, 315, 118793. https://doi.org/10.1016/j.enconman.2024.118793
[16] Ibrahim, Y., Kershaw, T., Shepherd, P., & Elkady, H. (2022). Multi-objective optimisation of urban courtyard blocks in hot arid zones. Solar Energy, 240, 104-120. https://doi.org/10.1016/j.solener.2022.05.024
[17] GamalEldine, M., & Corvacho, H. (2022). Compliance with building energy code for the residential sector in Egyptian hot-arid climate: Potential impact, difficulties, and further improvements. Sustainability, 14(7), 3936. https://doi.org/10.3390/su14073936
[18] Özdemir, H., & Çakmak, B. Y. (2022). Evaluation of daylight and glare quality of office spaces with flat and dynamic shading system facades in hot arid climate. Journal of Daylighting, 9(2), 197-208. https://dx.doi.org/10.15627/jd.2022.15
[19] Skandalos, N., Wang, M., Kapsalis, V., D’Agostino, D., Parker, D., Bhuvad, S. S., … & Karamanis, D. (2022). Building PV integration according to regional climate conditions: BIPV regional adaptability extending Köppen-Geiger climate classification against urban and climate-related temperature increases. Renewable and Sustainable Energy Reviews, 169, 112950. https://doi.org/10.1016/j.rser.2022.112950
[20] Mokhtari, R., Ulpiani, G., & Ghasempour, R. (2022). The Cooling Station: combining hydronic radiant cooling and daytime radiative cooling for urban shelters. Applied Thermal Engineering, 211, 118493. https://doi.org/10.1016/j.applthermaleng.2022.118493
[21] Feehan, A., Nagpal, H., Marvuglia, A., & Gallagher, J. (2021). Adopting an integrated building energy simulation and life cycle assessment framework for the optimisation of facades and fenestration in building envelopes. Journal of Building Engineering, 43, 103138. https://doi.org/10.1016/j.jobe.2021.103138
[22] Kharrufa, S. N., Awad, J., Jung, C., & Sherzad, M. (2022). Evaluating an active low-energy cooling upgrade to the building envelope in the hot climates of the Middle East. International Journal of Low-Carbon Technologies, 17, 118-129. https://doi.org/10.1093/ijlct/ctab091
[23] Jung, C., Elsamanoudy, G., & Abdelaziz Mahmoud, N. S. (2025). Towards Safer and Healthier Childcare Facilities: Evaluating Environmental and Safety Standards in Daycare Centers in Dubai. Buildings, 15(6), 953. https://doi.org/10.3390/buildings15060953
[24] Jung, C., Sami Abdelaziz Mahmoud, N., & El Samanoudy, G. (2025). Overcooling in UAE homes: Health issues and implications for learning efficiency. Architectural Science Review, 68(2), 120-133. https://doi.org/10.1080/00038628.2024.2360910
[25] Singh, R., Buddhi, D., Thapa, S., Prakash, C., Singh, R., Sharma, A., … & Saxena, K. K. (2022). Sensitivity Analysis for Decisive Design Parameters for Energy and Indoor Visual Performances of a Glazed Façade Office Building. Sustainability, 14(21), 14163. https://doi.org/10.3390/su142114163
[26] Noaman, D. S., Moneer, S. A., Megahed, N. A., & El-Ghafour, S. A. (2022). Integration of active solar cooling technology into passively designed facade in hot climates. Journal of Building Engineering, 56, 104658. https://doi.org/10.1016/j.jobe.2022.104658
[27] Abedini, M. H., Gholami, H., & Sangin, H. (2025). Multi-objective optimization of window and shading systems for enhanced office Building performance: A case study in Qom, Iran. Journal of Daylighting, 12(1), 91-110. https://dx.doi.org/10.15627/jd.2025.6

