Design and Performance Validation of a Sustainable Housing Prototype in the Kingdom of Bahrain Using Green Building Concepts and Smart Technologies

Design and Performance Validation of a Sustainable Housing Prototype in the Kingdom of Bahrain Using Green Building Concepts and Smart Technologies

Danish AHMED, Muhammad AJMAL, Wejdan Saleh N ALAHMED, Tahar AYADAT, Andi ASIZ, Sani I. ABBA

Abstract. Rapid population growth in the Kingdom of Bahrain has intensified demand for residential housing while increasing environmental impacts associated with conventional construction practices. This study presents the design, structural validation, and performance evaluation of a sustainable housing unit based on the Ministry of Housing T8 model, integrating green building materials, renewable energy systems, and smart technologies. The proposed design incorporates green concrete with 50% cement replacement by fly ash, recycled steel reinforcement, smart glass façade systems, occupancy-based LED lighting sensors, photovoltaic panels, high-performance wall and roof insulation, and water reuse through rooftop hydroponic cultivation. Structural analysis was conducted using ETABS software in accordance with BS 8110 and BS 6399 standards. Results indicate that green concrete achieved a 28-day compressive strength of 20.22 N/mm² compared to 21.34 N/mm² for conventional concrete, demonstrating negligible structural performance reduction. Material cost analysis revealed a reduction from 22.82 BHD to 20.33 BHD per mix batch, while recycled steel reduced reinforcement costs by approximately 60%. Energy-efficient systems significantly lowered projected electricity consumption, particularly through solar integration and occupancy-controlled lighting, which reduced monthly lighting costs from 43.77 BHD to 8.75 BHD. The findings confirm that sustainable residential construction in Bahrain is technically feasible, structurally reliable, economically advantageous, and environmentally responsible, offering a scalable prototype aligned with Bahrain Vision 2030 and global Sustainable Development Goals.

Keywords
Sustainable Housing, Green Concrete, Smart Glazing, Occupancy Sensors, Photovoltaic Systems, ETABS, LEED Certification, Climate-Responsive Design, Bahrain Vision 2030

Published online 10/5/2026, 10 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Danish AHMED, Muhammad AJMAL, Wejdan Saleh N ALAHMED, Tahar AYADAT, Andi ASIZ, Sani I. ABBA, Design and Performance Validation of a Sustainable Housing Prototype in the Kingdom of Bahrain Using Green Building Concepts and Smart Technologies, Materials Research Proceedings, Vol. 72, pp 146-155, 2026

DOI: https://doi.org/10.21741/9781644904336-13

The article was published as article 13 of the book Smart and Sustainable Architecture and Urban Resilience

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] Hafez, F. S., Sa’di, B., Safa-Gamal, M., Taufiq-Yap, Y., Alrifaey, M., Seyedmahmoudian, M., Stojcevski, A., Horan, B., & Mekhilef, S. (2022). Energy efficiency in sustainable buildings: A systematic review with taxonomy, challenges, motivations, methodological aspects, recommendations, and pathways for future research. Energy Strategy Reviews, 45, 101013. https://doi.org/10.1016/j.esr.2022.101013
[2] Moghayedi, A., Awuzie, B. O., & Mehmood, A. (2026). Evaluating the sustainability performance of sustainable, innovative, and affordable housing. International Planning Studies, 31(1), 1–36. https://doi.org/10.1080/13563475.2025.2550970
[3] Ajmal, M., Ismaeel, R., Ismail, M., Ahmed, D., & Ayadat, T. (2025). Seismic assessment of reinforced concrete building strengthened with CFRP sheets using non-linear static approach. Materials Research Proceedings, 48, 123–130. https://doi.org/10.21741/9781644903414-14
[4] Mohammed, N., Abdulla, S., Ahmed, D., Ajmal, M., & Asiz, A. (2025). Analyzing the differences between the impacts of wind and earthquakes on base shear and drift in diagrid structures. In Materials Research Proceedings (Vol. 48, pp. 11–19). Materials Research Forum. https://doi.org/10.21741/9781644903414-2
[5] Gbran, H., & Alzamil, W. (2025). Achieving sustainable housing in smart cities: The role of model-based engineering in developing complex systems in line with Vision 2030. Smart Construction and Sustainable Cities, 3, Article 24. https://doi.org/10.1007/s44268-025-00062-w
[6] Vuruşan, O., & Nafa, H. (2025). Improving the energy performance of residential buildings through solar renewable energy systems and smart building technologies: The Cyprus example. Sustainability, 18(3), 1195. https://doi.org/10.3390/su18031195
[7] Dernayka, S., Ahmed, D., Ajmal, M., Asiz, A., & Ayadat, T. (2022). Comparison of wind-induced response of high-rise buildings with reinforced concrete and cross-laminated timber. In Proceedings of the Fourth European and Mediterranean Structural Engineering and Construction Conference. ISEC Press. https://doi.org/10.14455/ISEC.2022.9(1).STR-21
[8] Ajmal, M., Ahmed, D., & Asiz, A. (2016). Structural performance of hybrid tall buildings designed using ultra-lightweight floor slabs. Insights and Innovations in Structural Engineering, Mechanics and Computation – Proceedings of the 6th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2016. https://doi.org/10.1201/9781315641645-162
[9] Siddiqui, F., Datt, S., & Dey, D. H. S. (2025). Sustainable building materials for energy-efficient building development: A review. International Journal of Science and Technology, 2(4), 211–223. https://doi.org/10.70558/IJST.2025.v2.i4.241139
[10] European Network for Housing Research. (n.d.). Energy-efficiency and environmental sustainability of housing. Retrieved March 1, 2026, from https://enhr.net/energy-efficiency-and-environmental-sustainability-of-housing/
[11] Ajmal, M., Ahmed, D., Taib, S. N. L., Ayadat, T., Hasan, A., & Abba, S. I. (2025). Neural network prediction of raft foundation bearing capacity on stone column-reinforced soft clay using PLAXIS 3D generated data. In Proceedings of the 9th IET Smart Cities Symposium (SCS 2025). IET.
[12] Ajmal, M., Ahmed, D., Alam, M. S., Alzayani, N. J., Ismaeel, R., & Abba, S. I. (2025). Compressive strength prediction of reactive powder concrete through artificial neural networks. In Proceedings of the 2025 International Conference on Innovation and Intelligence for Informatics, Computing, and Technologies (3ICT) (pp. 1–8). IEEE. https://doi.org/10.1109/3ict68299.2025.11442121
[13] Ahmed, D., Ayadat, T., & Asiz, A. (2020). Design and performance of high-rise structure using ultra-lightweight cross-laminated timber floor system. International Structural Engineering and Construction, 7(2). https://doi.org/10.21741/9781644903414-12
[14] Mehta, P. K., & Monteiro, P. J. M. (2014). Concrete: Microstructure, Properties, and Materials (4th ed.). McGraw-Hill Education. ISBN-13: 978-0071797870.
[15] Scrivener, K. L., John, V. M., & Gartner, E. M. (2018). Eco-efficient cements: Potential economically viable solutions for a low-CO₂ cement-based materials industry. Cement and Concrete Research, 114, 2–26. https://doi.org/10.1016/j.cemconres.2018.03.015
[16] Ürge-Vorsatz, D., et al. (2015). Heating and cooling energy trends and drivers in buildings. Renewable and Sustainable Energy Reviews, 41, 85–98. https://doi.org/10.1016/j.rser.2014.08.039
[17] IEA. (2023). Buildings sector energy report. https://www.iea.org/reports/buildings
[18] Alam, M., Reza, F., & Rahman, M. (2019). Smart building technologies for sustainable development. Sustainable Cities and Society, 45, 414–426. https://doi.org/10.1016/j.scs.2018.11.043
[19] Kalogirou, S. A. (2014). Solar energy engineering: Processes and systems (2nd ed.). Academic Press. https://doi.org/10.1016/C2011-0-07038-2
[20] Reiche, D. (2010). Energy policies of Gulf Cooperation Council countries—Possibilities and limitations of ecological modernization. Energy Policy, 38(5), 2395–2403. https://doi.org/10.1016/j.enpol.2009.12.031
[21] U.S. Green Building Council. (2021). LEED v4.1 for building design and construction. https://www.usgbc.org
[22] Olgyay, V. (2015). Design with Climate: Bioclimatic Approach to Architectural Regionalism. Princeton: Princeton University Press. https://doi.org/10.1515/9781400873685