Adaptive Bio-PCM Envelopes for Smart City Thermal Regulation
Gaydaa ALZOHBI, Deepanraj BALAKRISHNAN
Abstract. Changing our urban settings into smart, resilient, and carbon-neutral ecosystems means that the building should no longer be considered a mere static barrier but must evolve into an adaptive-thermally active interface. In this paper, we propose a full framework for the application of Bio-Based Phase Change Materials (Bio-PCMs) to Adaptive Building Envelopes (ABEs) as a means of natural cooling in the smart city context. As urban heat island (UHI) effects become more severe, the necessity for phasing out petroleum-based paraffins and replacing them with bio-based ones derived from fatty acids and esters of the renewable feedstock is inevitable if cities are to be sustainable. This paper develops a qualitative approach for the choice of materials and their embedding in architectural design by combining the Analytic Hierarchy Process (AHP) with biomimetic mapping to ensure the thermophysical characteristics fit the specific weather conditions. The test results show that Bio-PCM installation has the potential to reduce the extent of temperature variations by around 28%, increase the thermal lag up to 3.4 hours, and cut down heating energy use in the temperate climate by 41%. Moreover, with the use of Bio-PCMs, the emission of CO2-equivalent could be lowered by 40-60% compared to the traditional PCM systems. This paper offers solutions to the main issues of bio-based PCMs such as their packaging, durability over numerous cycles, as well as their commercial viability. Thus, serving as a guide for the introduction of energy-generating building exteriors or “living” skins which not only help in the demand-side management of smart energy grids but are also energy producers themselves.
Keywords
Bio-Based Phase Change Materials (Bio-PCMs), Adaptive Building Envelopes (ABEs), Urban Heat Island (UHI) Mitigation, Smart Cities, Passive Thermal Regulation, Circular Economy
Published online 10/5/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Gaydaa ALZOHBI, Deepanraj BALAKRISHNAN, Adaptive Bio-PCM Envelopes for Smart City Thermal Regulation, Materials Research Proceedings, Vol. 72, pp 122-129, 2026
DOI: https://doi.org/10.21741/9781644904336-10
The article was published as article 10 of the book Smart and Sustainable Architecture and Urban Resilience
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Nurfatehar, R., R. Hod, M.R. Hassan, F. Arsad, M. Firdaus, M. Radi, & R. Ismail, IMPACT OF URBAN HEAT ISLAND ON HUMAN HEALTH: A SYSTEMATIC REVIEW. 2024.
[2] Ravotti, R., O. Fellmann, N. Lardon, L.J. Fischer, A. Stamatiou, & J. Worlitschek Analysis of Bio-Based Fatty Esters PCM’s Thermal Properties and Investigation of Trends in Relation to Chemical Structures. Applied Sciences, 2019. 9, 225 DOI: 10.3390/app9020225.
[3] Faragalla, A.M.A. &S. Asadi Biomimetic Design for Adaptive Building Façades: A Paradigm Shift towards Environmentally Conscious Architecture. Energies, 2022. 15, 5390 DOI: 10.3390/en15155390.
[4] Reyssat, E. &L. Mahadevan, Hygromorphs: from pine cones to biomimetic bilayers. J R Soc Interface, 2009. 6(39): p. 951-7.DOI: 10.1098/rsif.2009.0184.
[5] Sommese, F., S.M. Hosseini, L. Badarnah, F. Capozzi, S. Giordano, V. Ambrogi, & G. Ausiello, Light-responsive kinetic façade system inspired by the Gazania flower: A biomimetic approach in parametric design for daylighting. Building and Environment, 2024. 247: p. 111052.DOI: https://doi.org/10.1016/j.buildenv.2023.111052.
[6] Li, Y., W. He, W. Tao, C. Yang, Y. Li, & J. Darkwa, Impacts of Design Parameters on the Thermal Performance of a Macro-Encapsulated Phase-Change-Material Blind Integrated in a Double-Skin Façade System. Energies, 2025. 18: p. 3326.DOI: 10.3390/en18133326.
[7] Choong, Y.H., M. Krishnan, & M. Gupta Recent Advances in the 3D Printing of Pure Copper Functional Structures for Thermal Management Devices. Technologies, 2023. 11, 141 DOI: 10.3390/technologies11050141.
[8] Deveci, S. &G. Basal, Preparation of PCM microcapsules by complex coacervation of silk fibroin and chitosan. Colloid Polym. Sci., 2009. 287: p. 1455-1467.DOI: 10.1007/s00396-009-2115-z.
[9] Dewi, O.C., N. Putra, B. Rangin, K. Rahmasari, N.D. Salsabila, G.G. Nasution, & D. Waasthia, Bamboo-encapsulated bio-based PCM panel as thermal stabiliser for glamping in a highland area of Indonesia. Building and Environment, 2024. 252: p. 111298.DOI: https://doi.org/10.1016/j.buildenv.2024.111298.
[10] Liu, X., F. Yang, M. Li, C. Sun, & Y. Wu, Development of cost-effective PCM-carbon foam composites for thermal energy storage. Energy Reports, 2022. 8: p. 1696-1703.DOI: 10.1016/j.egyr.2021.12.065.
[11] Hasan, L.M. &S. Khanna Development and Evaluation of an Integrated Phase Change Material Oriented Strand Board for Thermal Energy Storage in Building Walls. Energies, 2026. 19, 773 DOI: 10.3390/en19030773.
[12] Nalla, B.T., G. Subbiah, D. K, S.N. Das, S.K. M, S.K. Swarnkar, N. Kaliappan, & K.P. K, Bio-based phase-change materials for thermal energy storage: Recent advances, challenges, and outlook. Results in Engineering, 2025. 28: p. 107087.DOI: https://doi.org/10.1016/j.rineng.2025.107087.
[13] Ben-Ali, S., H. Nouri, N. Mekaddem, K. el Arbi, P. Legros, & F. Achchaq, Bio-Based Pomegranate Peel/Paraffin Wax Phase Change Composites for enhanced Thermal Energy Storage. Results in Engineering, 2025. 27: p. 106317.DOI: 10.1016/j.rineng.2025.106317.
[14] Zhou, D., S. Xiao, X. Xiao, & Y. Liu Preparation, Phase Diagrams and Characterization of Fatty Acids Binary Eutectic Mixtures for Latent Heat Thermal Energy Storage. Separations, 2023. 10, 49 DOI: 10.3390/separations10010049.
[15] Hammami, N., S. Patry, A. Geneste, B. Malet-Damour, D. Bigot, & J.-P. Habas, Sustainable phase change material solutions for buildings: A study on the potential of vegetable butters. Journal of Energy Storage, 2026. 148.DOI: 10.1016/j.est.2026.120351.
[16] Abdolahimoghadam, M. &M. Rahimi, New hybrid nano- and bio-based phase change material containing graphene-copper particles hosting beeswax-coconut oil for solar thermal energy storage: Predictive modeling and evaluation using machine learning. Energy, 2024. 307: p. 132604.DOI: https://doi.org/10.1016/j.energy.2024.132604.
[17] Yang, L., X. Cao, N. Zhang, X. Bo, Z. Zhang, & B. Qian, Thermal reliability of typical fatty acids as phase change materials based on 10,000 accelerated thermal cycles. Sustainable Cities and Society, 2018. 46.DOI: 10.1016/j.scs.2018.12.008.
[18] Wadee, A., P. Walker, N. McCullen, & V. Ferrandiz-Mas, The effect of thermal cycling on the thermal and chemical stability of paraffin phase change materials (PCMs) composites. Mater Struct, 2025. 58(1): p. 25.DOI: 10.1617/s11527-024-02556-y.
[19] Nazari, M., Life cycle assessment of new wood-based composite panel integrated with bio-based phase change material for energy storage in buildings. Wood Material Science and Engineering, 2025.DOI: 10.1080/17480272.2025.2584273.
[20] Che-Pan, M., E. Simá, A. Ávila-Hernández, J. Uriarte-Flores, & R. Vargas-López, Thermal performance of a window shutter with a phase change material as a passive system for buildings in warm and cold climates of México. Energy and Buildings, 2023. 281: p. 112775.DOI: https://doi.org/10.1016/j.enbuild.2023.112775.
[21] Vik, T., H. Madessa, P. Aslaksrud, E. Folkedal, & O. Øvrevik, Thermal Performance of an Office Cubicle Integrated with a Bio-based PCM: Experimental Analyses. Energy Procedia, 2017. 111: p. 609-618.DOI: 10.1016/j.egypro.2017.03.223.
[22] Shaik, S., A. Vishnu Priya, V.R. Maduru, A. Rahaman, M. Arıcı, K.J. Kontoleon, & D. Li, Glazing systems utilizing phase change materials: Solar-optical characteristics, potential for energy conservation, role in reducing carbon emissions, and impact on natural illumination. Energy and Buildings, 2024. 311: p. 114151.DOI: https://doi.org/10.1016/j.enbuild.2024.114151.
[23] Jaradat, M., H. Al Majali, C. Bendea, C.C. Bungau, & T. Bungau Enhancing Energy Efficiency in Buildings through PCM Integration: A Study across Different Climatic Regions. Buildings, 2024. 14, 40 DOI: 10.3390/buildings14010040.
[24] Emam, M., A. Hamada, H.A. Refaey, M. Moawed, M.A. Abdelrahman, & M.R. Rashed, Year-round experimental analysis of a water-based PVT-PCM hybrid system: Comprehensive 4E assessments. Renewable Energy, 2024. 226: p. 120354.DOI: https://doi.org/10.1016/j.renene.2024.120354.
[25] Jin, Y., Z. Jiang, X. Wang, & B. Dong, Empowering phase change material thermodynamics via physics-consistent neural network-enabled advanced building control. Applied Energy, 2026. 404: p. 127143.DOI: https://doi.org/10.1016/j.apenergy.2025.127143.
[26] Wu, X., Y. Wang, S. Deng, & P. Su Climate-Responsive Design of Photovoltaic Façades in Hot Climates: Materials, Technologies, and Implementation Strategies. Buildings, 2025. 15, 1648 DOI: 10.3390/buildings15101648.

