Microclimatic Risk Assessment of Built-In Closets in Saudi Housing: A Hygrothermal Evaluation for Mold Prevention
Chuloh JUNG, Jamal F. NAYFEH, Massimiliano Gotti PORCINARI, Nadine FAYAD
Abstract. This study investigates the hygrothermal conditions of built-in closets in Saudi residential apartments, focusing on condensation and mold risk in hot-humid environments. Field measurements were conducted in Al Khobar during winter to evaluate temperature, relative humidity, and absolute humidity under varying door configurations and moisture-control strategies. Results showed that while surface temperatures remained above dew point levels, relative humidity frequently exceeded 80%, particularly in closets with ventilated gallery doors, posing significant mold risks. In contrast, sealed closets equipped with desiccants or dehumidifiers substantially reduced absolute humidity, demonstrating improved environmental stability. These findings highlight critical gaps in Saudi building codes, which currently lack provisions for moisture control in semi-enclosed storage areas. As the Kingdom progresses toward airtight and energy-efficient housing under Vision 2030, the study emphasizes the need for integrated design strategies and regulatory updates to manage microclimatic conditions and ensure occupant health and material durability in high-humidity zones.
Keywords
Condensation Control, Built-In Closets, Hygrothermal Performance, Relative Humidity, Residential Architecture in Saudi Arabia
Published online 10/5/2026, 9 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Chuloh JUNG, Jamal F. NAYFEH, Massimiliano Gotti PORCINARI, Nadine FAYAD, Microclimatic Risk Assessment of Built-In Closets in Saudi Housing: A Hygrothermal Evaluation for Mold Prevention, Materials Research Proceedings, Vol. 72, pp 2-10, 2026
DOI: https://doi.org/10.21741/9781644904336-1
The article was published as article 1 of the book Smart and Sustainable Architecture and Urban Resilience
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Alshihri, S., Al-Gahtani, K., & Almohsen, A. (2022). Risk factors that lead to time and cost overruns of building projects in Saudi Arabia. Buildings, 12(7), 902. https://doi.org/10.3390/buildings12070902
[2] Hintikka, T., Andersson, M. A., Marik, T., Mikkola, R., Andersson, M., Kredics, L., … & Salonen, H. (2025). Revealing Stachybotrys-like fungal growth in buildings-Possible exposure highlighted through three case studies. Science of the Total Environment, 961, 178408. https://doi.org/10.1016/j.scitotenv.2025.178408
[3] Guo, M., Wu, Y., & Miao, X. (2023). Thermal Bridges Monitoring and Energy Optimization of Rural Residences in China’s Cold Regions. Sustainability, 15(14), 11015. https://doi.org/10.3390/su151411015
[4] Jung, C., Alqassimi, N., & El Samanoudy, G. (2022). Evaluating the adsorption performance of functional building material with HCHO remover. Frontiers in Built Environment, 8, 998872. https://doi.org/10.3389/fbuil.2022.998872
[5] Kumar, P., Kausar, M. A., Singh, A. B., & Singh, R. (2021). Biological contaminants in the indoor air environment and their impacts on human health. Air Quality, Atmosphere & Health, 14(11), 1723-1736. https://doi.org/10.1007/s11869-021-00978-z
[6] Odnoletkova, N., & Patzek, T. W. (2021). Data-driven analysis of climate change in Saudi Arabia: Trends in temperature extremes and human comfort indicators. Journal of Applied Meteorology and Climatology, 60(8), 1055-1070. https://doi.org/10.1175/JAMC-D-20-0273.1
[7] Dano, U. L., Abubakar, I. R., AlShihri, F. S., Ahmed, S. M., Alrawaf, T. I., & Alshammari, M. S. (2023). A multi-criteria assessment of climate change impacts on urban sustainability in Dammam Metropolitan Area, Saudi Arabia. Ain Shams Engineering Journal, 14(9), 102062. https://doi.org/10.1016/j.asej.2022.102062
[8] Lopez-Carreon, I., Jahan, E., Yari, M. H., Esmizadeh, E., Riahinezhad, M., Lacasse, M., … & Dragomirescu, E. (2025). Moisture Ingress in Building Envelope Materials:(II) Transport Mechanisms and Practical Mitigation Approaches. Buildings, 15(5), 762. https://doi.org/10.3390/buildings15050762
[9] Ling, H. M., Yew, M. C., Yew, M. K., & Saw, L. H. (2024). Analyzing recent active and passive cool roofing technology in buildings, including challenges and optimization approaches. Journal of Building Engineering, 109326. https://doi.org/10.1016/j.jobe.2024.109326
[10] Abdelaziz Mahmoud, N. S., & Jung, C. (2023). Analyzing the bake-out effect in winter for the enhancement of indoor air quality at new apartments in UAE. Buildings, 13(4), 846. https://doi.org/10.3390/buildings13040846
[11] Jamoussi, B., Abu-Rizaiza, A., & AL-Haij, A. (2022). Sustainable building standards, codes and certification systems: The status quo and future directions in Saudi Arabia. Sustainability, 14(16), 10314. https://doi.org/10.3390/su141610314
[12] Yuan, L., Takada, S., & Fukui, K. (2024). Study on mold and condensation risks after vacancy of residential space with walls in contact with the ground. Journal of Building Engineering, 89, 109300. https://doi.org/10.1016/j.jobe.2024.109300
[13] Shafaghat, A., & Keyvanfar, A. (2022). Dynamic façades design typologies, technologies, measurement techniques, and physical performances across thermal, optical, ventilation, and electricity generation outlooks. Renewable and Sustainable Energy Reviews, 167, 112647. https://doi.org/10.1016/j.rser.2022.112647
[14] Li, X., Liu, D., & Yao, J. (2022). Aerosolization of fungal spores in indoor environments. Science of The Total Environment, 820, 153003. https://doi.org/10.1016/j.scitotenv.2022.153003
[15] Zhang, C., Xu, X., Yu, J., Tang, X., & Yu, Z. (2024). Condensation risk-based applicability analysis and design of a dynamic thermal insulation window with ventilated airflow in different climates. Journal of Building Engineering, 86, 108913. https://doi.org/10.1016/j.jobe.2024.108913
[16] Riahinezhad, M., Hallman, M., & Masson, J. F. (2021). Critical review of polymeric building envelope materials: degradation, durability and service life prediction. Buildings, 11(7), 299. https://doi.org/10.3390/buildings11070299
[17] Guarnieri, G., Olivieri, B., Senna, G., & Vianello, A. (2023). Relative humidity and its impact on the immune system and infections. International journal of molecular sciences, 24(11), 9456. https://doi.org/10.3390/ijms24119456
[18] Betak, A., Baar, J., Decky, D., & Vanerek, J. (2022). Material Behavior of Structural Wood-Based Boards Affected by Rotting Process and Immersion in Water. Journal of Materials in Civil Engineering, 34(11), 04022299. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004455
[19] Du, C., Li, B., & Yu, W. (2021). Indoor mould exposure: characteristics, influences and corresponding associations with built environment—a review. Journal of Building Engineering, 35, 101983. https://doi.org/10.1016/j.jobe.2020.101983
[20] Arar, M., & Jung, C. (2022). Analyzing the perception of indoor air quality (IAQ) from a survey of new townhouse residents in Dubai. Sustainability, 14(22), 15042. https://doi.org/10.3390/su142215042
[21] Alaidroos, A., & Mosly, I. (2023). Preventing mold growth and maintaining acceptable indoor air quality for educational buildings operating with high mechanical ventilation rates in hot and humid climates. Air Quality, Atmosphere & Health, 16(2), 341-361. https://doi.org/10.1007/s11869-022-01277-x
[22] Alyami, M., & Omer, S. (2021). Building energy performance simulation: a case study of modelling an existing residential building in Saudi Arabia. Environmental Research: Infrastructure and Sustainability, 1(3), 035001. https://doi.org/10.1088/2634-4505/ac241e
[23] Ghasaban, M., Mirjalili, P., & Yeganeh, M. (2025). Integration of building envelope with open spaces and greenery to enhance thermal and visual comfort and energy efficiency in office buildings. Results in Engineering, 25, 103660. https://doi.org/10.1016/j.rineng.2024.103660
[24] Chen, Q., Burhan, M., Shahzad, M. W., Ybyraiymkul, D., Oh, S., Cui, X., & Ng, K. C. (2022). Long-term performance of a hybrid indirect evaporative cooling-mechanical vapor compression cycle: A case study in Saudi Arabia. Frontiers in Built Environment, 8, 1032961. https://doi.org/10.3389/fbuil.2022.1032961
[25] Ling, H. M., Yew, M. C., Yew, M. K., & Saw, L. H. (2024). Analyzing recent active and passive cool roofing technology in buildings, including challenges and optimization approaches. Journal of Building Engineering, 109326. https://doi.org/10.1016/j.jobe.2024.109326
[26] Yuan, L., Takada, S., & Fukui, K. (2024). Study on mold and condensation risks after vacancy of residential space with walls in contact with the ground. Journal of Building Engineering, 89, 109300. https://doi.org/10.1016/j.jobe.2024.109300
[27] Mani, Z. A., & Goniewicz, K. (2023). Adapting disaster preparedness strategies to changing climate patterns in Saudi Arabia: a rapid review. Sustainability, 15(19), 14279. https://doi.org/10.3390/su151914279

