Artificial intelligence approaches for waste minimization and yield optimization in green manufacturing systems
Irshadullah Asim MOHAMMED, Diksha SRIVASTAVA, Pallawi BULAKH, Niket TAJNE, C. VIJAI, Sachin TRIPATHI
Abstract. The intersection of artificial intelligence (AI) and sustainable manufacturing offers an innovative possibility to decrease industrial waste and, at the same time, improve the production yield. The current paper suggests a new multi-layer AI architecture including a hybrid Convolutional Neural Network-Long Short-Term Memory (CNN-LSTM) neural network and a Multi-Objective Genetic Algorithm (MOGA) optimizer to control real-time process in green manufacturing setting. The architecture acts on the heterogeneous sensor streams, energy metering information, and process logs in a five-stage pipeline including data acquisition, preprocessing, AI inference, decision support and closed-loop feedback. Two industrial datasets (n = 18,400 samples and n = 14,200 samples) of semiconductor fabrication and automotive body stamping data (20192023) are experimentally validated. The proposed system attains a waste reduction of 34.7, a yield improvement of 17.1 and prediction RMSE of 1.72 as compared to the traditional machine learning baselines. The explainability analysis using SHAP reveals that the dominant process variables are the coolant temperature, spindle speed and feed rate. The findings affirm that the proposed hybrid AI architecture is more effective than the current approaches and provides a deployable and scalable system towards smart green manufacturing.
Keywords
Green Manufacturing, Deep Learning, Waste Minimization, Yield Optimization, CNN-LSTM, Multi-Objective Genetic Algorithm, Explainable AI
Published online 8/15/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Irshadullah Asim MOHAMMED, Diksha SRIVASTAVA, Pallawi BULAKH, Niket TAJNE, C. VIJAI, Sachin TRIPATHI, Artificial intelligence approaches for waste minimization and yield optimization in green manufacturing systems, Materials Research Proceedings, Vol. 71, pp 41-48, 2026
DOI: https://doi.org/10.21741/97816449042312-6
The article was published as article 6 of the book AI-Driven Innovations in Mechanical, Manufacturing, and Energy Engineering
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] United Nations Environment Programme, “Global Resources Outlook 2024: Bend the Trend-Pathways to a Liveable Planet as Resource Use Spikes,” UNEP, Nairobi, Kenya, 2024.
[2] T. Stock and G. Seliger, “Opportunities of sustainable manufacturing in Industry 4.0,” Procedia CIRP, vol. 40, pp. 536-541, 2016. https://doi.org/10.1016/j.procir.2016.01.129
[3] J. Gutowski, T. Dahmus, and A. Thiriez, “Electrical energy requirements for manufacturing processes,” in Proc. 13th CIRP Int. Conf. Life Cycle Eng., Leuven, Belgium, 2006, pp. 1-5.
[4] D. C. Montgomery, Introduction to Statistical Quality Control, 7th ed. Hoboken, NJ, USA: Wiley, 2013.
[5] M. Wollschlaeger, T. Sauter, and J. Jasperneite, “The future of industrial communication: Automation networks in the era of the Internet of Things and Industry 4.0,” IEEE Ind. Electron. Mag., vol. 11, no. 1, pp. 17-27, Mar. 2017. https://doi.org/10.1109/MIE.2017.2649104
[6] Y. LeCun, Y. Bengio, and G. Hinton, “Deep learning,” Nature, vol. 521, no. 7553, pp. 436-444, May 2015. https://doi.org/10.1038/nature14539
[7] S. Hochreiter and J. Schmidhuber, “Long short-term memory,” Neural Comput., vol. 9, no. 8, pp. 1735-1780, Nov. 1997. https://doi.org/10.1162/neco.1997.9.8.1735
[8] X. Chen, S. You, E. Sinha, and H. Zhang, “Deep learning-based hybrid model for short-term energy forecasting in manufacturing plants,” IEEE Trans. Ind. Informat., vol. 18, no. 4, pp. 2603-2612, Apr. 2022.
[9] K. Deb, A. Pratap, S. Agarwal, and T. Meyarivan, “A fast and elitist multiobjective genetic algorithm: NSGA-II,” IEEE Trans. Evol. Comput., vol. 6, no. 2, pp. 182-197, Apr. 2002. https://doi.org/10.1109/4235.996017
[10] R. Harik, F. Guerin, F. Guinand, and J.-F. Bremont, “UAG-NSGA-II: A multi-objective genetic algorithm for sustainable manufacturing scheduling,” J. Intell. Manuf., vol. 30, no. 4, pp. 1583-1601, 2019.
[11] A. Kusiak, “Smart manufacturing must embrace big data,” Nature, vol. 544, no. 7648, pp. 23-25, Apr. 2017. https://doi.org/10.1038/544023a
[12] S. M. Lundberg and S.-I. Lee, “A unified approach to interpreting model predictions,” in Proc. Adv. Neural Inf. Process. Syst. (NeurIPS), Long Beach, CA, USA, 2017, pp. 4765-4774.
[13] Y. He, Y. He, and D. Zhang, “Real-time adaptive manufacturing control using deep reinforcement learning with production feedback,” Robot. Comput.-Integr. Manuf., vol. 78, p. 102395, 2022.
[14] H. Zhang, S. Ying, J. Zhao, and R. Liu, “Reinforcement learning-based energy-aware production scheduling for smart factories,” IEEE Trans. Autom. Sci. Eng., vol. 20, no. 1, pp. 342-355, Jan. 2023.
[15] Rout, P., Jha, A. K., Gupta, P., Singh, B. and Choudhury, S., “Failure analysis of composite plate under ballistic impact,” Mater. Today Proc., vol. 74, pp. 1008-1011, 2023. https://doi.org/10.1016/j.matpr.2022.11.357
[16] Ruhela, H. S., Bhardwaj, S., Agrawal, T. and Gupta, P., “Explicit dynamics analysis of shin pads using finite element analysis,” in Int. Conf. Industrial Problems on Machines and Mechanism, Springer, Singapore, 2022, pp. 683-690. https://doi.org/10.1007/978-981-99-4270-1_67
[17] Kumar, M., Rajiyan, J. and Gupta, P., “A computational approach for solving elasto-statics problems,” Mater. Today Proc., vol. 46, pp. 6876-6879, 2021. https://doi.org/10.1016/j.matpr.2021.04.462
[18] W. Li and J. Chen, “XGBoost-based yield prediction for semiconductor wafer fabrication using in-situ metrology data,” J. Manuf. Syst., vol. 65, pp. 444-453, 2022.

