Parametric effects of nano titanium dioxide on chloride diffusivity of cement mortar via taguchi grey relational analysis
Prashant TIWARI, Yogesh Iyer MURTHY, Abhishek VERMA
Abstract. This investigation aims to improve the durability of cement mortar in aggressive environments by examining the impact of Nano Titanium Dioxide (NT) on the chloride ion diffusivity. Over time, the effective diffusivity coefficients (Deff) of anolyte and catholyte for mortar mixtures containing 0-3% NT were determined. According to the results, NT’s filler effect and microstructural refinement considerably lower chloride migration. The ideal replacement level was determined to be 3% NT through optimization using Taguchi-based Grey Relational Analysis (GRA), which attained the lowest Deff (0.0242 × 10⁻¹³ cm²/s) and conductivity (0.322 mS/cm) at 15 minutes.
Keywords
Chloride Induced Corrosion, Nano-Titanium Dioxide, Effective Diffusivity Coefficients, Taguchi Analysis, Grey Relation
Published online 8/15/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Prashant TIWARI, Yogesh Iyer MURTHY, Abhishek VERMA, Parametric effects of nano titanium dioxide on chloride diffusivity of cement mortar via taguchi grey relational analysis, Materials Research Proceedings, Vol. 71, pp 242-249, 2026
DOI: https://doi.org/10.21741/97816449042312-33
The article was published as article 33 of the book AI-Driven Innovations in Mechanical, Manufacturing, and Energy Engineering
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] D. Whiting, Rapid determination of the chloride permeability of concrete, Federal Highway Administration, FHWA-RD-81-119 (1981). https://staging-dot.cdc.gov/view/dot/68474/dot_68474_DS1.pdf
[2] R. Zhao, C. Li, X. Guan, Advances in modeling surface chloride concentrations in concrete serving in the marine environment: A mini review, Buildings 14 (6) (2024) 1879. https://doi.org/10.3390/buildings14061879
[3] L. Tang, L.O. Nilsson, Chloride diffusivity in high strength concrete, Nord. Concr. Res. 11 (1992) 162–170.
[4] A. Verma, Y.I. Murthy, H. Singh, Steady state chloride diffusivity in mortar containing nano titanium dioxide using response surface methodology, J. Build. Pathol. Rehabil. 9 (2) (2024) 121. https://doi.org/10.1007/s41024-024-00471-x
[5] R.K. Dhir, M.R. Jones, H.E.H. Ahmed, A.M.G. Seneviratne, N.R. Buenfeld, S. El-Belbol, Rapid estimation of chloride diffusion coefficient in concrete, Mag. Concr. Res. 43 (155) (1991) 135–139. https://doi.org/10.1680/macr.1991.43.155.135
[6] M.A. Ansari, M. Shariq, S.S. Ansari, A. Husain, Efficiency assessment of TiO₂-based photocatalytic concrete for clean and sustainable construction: A state-of-the-art review, Iran. J. Sci. Technol. Trans. Civ. Eng. 48 (6) (2024) 3871–3898. https://doi.org/10.1007/s40996-024-01415-8
[7] B.Y. Lee, K.E. Kurtis, Influence of TiO₂ nanoparticles on early C₃S hydration, J. Am. Ceram. Soc. 93 (10) (2010) 3399–3405. https://doi.org/10.1111/j.1551-2916.2010.03868.x
[8] J. Chen, S.C. Kou, C.S. Poon, Hydration and properties of nano-TiO₂ blended cement composites, Cem. Concr. Compos. 34 (5) (2012) 642–649. https://doi.org/10.1016/j.cemconcomp.2012.02.009
[9] A.R. Jayapalan, B.Y. Lee, K.E. Kurtis, Effect of nano-sized titanium dioxide on early age hydration of Portland cement, Nanotechnol. Constr. 3 (2009) 267–273. https://doi.org/10.1007/978-3-642-00980-8_35
[10] R. Zhang, X. Cheng, P. Hou, Z. Ye, Influences of nano-TiO₂ on the properties of cement-based materials: Hydration and drying shrinkage, Constr. Build. Mater. 81 (2015) 35–41. https://doi.org/10.1016/j.conbuildmat.2015.02.003
[11] J. Liu, C. Shi, X. Ma, K.H. Khayat, J. Zhang, D. Wang, An overview on the effect of internal curing on shrinkage of high-performance cement-based materials, Constr. Build. Mater. 146 (2017) 702–712. https://doi.org/10.1016/j.conbuildmat.2017.04.154
[12] K. Taira, H. Einaga, Distribution ratio of Pt on anatase and rutile TiO₂ particles determined by X-ray diffraction and TEM analysis of Pt/TiO₂ (P25), Evergreen 5 (4) (2018) 13–17. https://doi.org/10.5109/2174853
[13] M.T. Naimah, F.D.N. Pratama, M. Ibadurrohman, Photocatalytic hydrogen production using Fe-graphene/TiO₂ photocatalysts in the presence of polyalcohols as sacrificial agents, Evergreen 9 (4) (2022). https://doi.org/10.5109/6625736
[14] A. Azani, D.S.C. Halin, M.M. Al Bakri Abdullah, K.A. Razak, M.F.S.A. Razak, M.M. Din Ramli, M.A.A.M. Salleh, V. Chobpattana, The effect of GO/TiO₂ thin film during photodegradation of methylene blue dye, Evergreen 8 (3) (2021) 556–564. https://doi.org/10.5109/4491643
[15] I.H. Dwirekso, M. Ibadurrohman, Slamet, Synthesis of TiO₂–SiO₂–CuO nanocomposite material and its activities for self-cleaning, Evergreen 7 (2) (2020) 285–291. https://doi.org/10.5109/4055234
[16] A.H. Shekari, M.S. Razzaghi, Influence of nanoparticles on durability and mechanical properties of high performance concrete, Procedia Eng. 14 (2011) 3036–3041. https://doi.org/10.1016/j.proeng.2011.07.382
[17] E. Mohseni, F. Naseri, R. Amjadi, M.M. Khotbehsara, M.M. Ranjbar, Microstructure and durability properties of cement mortars containing nano-TiO₂ and rice husk ash, Constr. Build. Mater. 114 (2016) 656–664. https://doi.org/10.1016/j.conbuildmat.2016.03.136
[18] B. Ma, H. Li, J. Mei, X. Li, F. Chen, Effects of nano-TiO₂ on the toughness and durability of cement-based material, Adv. Mater. Sci. Eng. (2015) 583106. https://doi.org/10.1155/2015/583106
[19] M.R. Alam, M. Safiuddin, C.M. Collins, K. Hossain, C. Bazan, Innovative use of nanomaterials for improving performance of asphalt binder and asphaltic concrete: A state-of-the-art review, Int. J. Pavement Eng. 25 (1) (2024) 2370567. https://doi.org/10.1080/10298436.2024.2370567
[20] X. Yu, S. Kang, X. Long, Compressive strength of concrete reinforced by TiO₂ nanoparticles, AIP Conf. Proc. 2036 (2018). https://doi.org/10.1063/1.5075659
[21] H.M. Elsayed, S.A. El-Sayed, M.F. El-Shafie, Assessment of mechanical and microstructural properties of green concrete incorporating nano-TiO₂, Constr. Build. Mater. 243 (2020) 118213. https://doi.org/10.1016/j.conbuildmat.2020.118213
[22] A.M. Rashad, A comprehensive overview about the influence of nano-TiO₂ on the properties of traditional cementitious materials and geopolymers, Constr. Build. Mater. 148 (2017) 130–153. https://doi.org/10.1016/j.conbuildmat.2017.05.001
[23] M.S. Sani, M.A.M. Hussin, S.A. Mohd Razali, Effect of nano titanium dioxide on the chloride permeability of concrete, J. Teknol. 77 (29) (2015) 17–21. https://doi.org/10.11113/jt.v77.6847
[24] H.S. Wong, F.P. Glasser, A. Buenfeld, M. Black, C. Nwaubani, Relation between microstructure and diffusion in hardened cement paste: Part I: Experimental evidence, Cem. Concr. Res. 90 (2016) 90–101. https://doi.org/10.1016/j.cemconres.2016.09.004
[25] N. Neithalath, Analysis of the influence of fly ash on the chloride diffusivity of concrete, Cem. Concr. Compos. 27 (3) (2005) 305–316. https://doi.org/10.1016/j.cemconcomp.2004.05.008
[26] A.A. Ramezanianpour, S. Mahdikhani, M. Ahmadibeni, The effect of rice husk ash on mechanical properties and durability of sustainable concretes, Int. J. Civ. Eng. 7 (2) (2009) 83–91.
[27] A. Bahari, M.A. Kafi, A. Sadeghi-Nik, S. Behfarnia, Influence of nano-TiO₂ on durability and mechanical properties of self-compacting concrete, Comput. Concr. 22 (6) (2018) 683–690. https://doi.org/10.12989/cac.2018.22.6.683
[28] M. Ramezani, M.H. Kargari, E. Barkhordari, The influence of TiO₂ nanoparticles on durability and mechanical properties of concrete, Iran. J. Sci. Technol. Trans. Civ. Eng. 45 (1) (2021) 19–26. https://doi.org/10.1007/s40996-020-00446-0
[29] M. Amin, H. El-Gamal, B. Mohammed, Effect of nano-TiO₂ and fly ash on the corrosion performance of steel bars in concrete, Constr. Build. Mater. 224 (2019) 44–54. https://doi.org/10.1016/j.conbuildmat.2019.07.042
[30] S. Behfarnia, A. Salemi, The effects of nano-titanium dioxide on permeability of concrete and steel bars corrosion, Constr. Build. Mater. 35 (2012) 571–577. https://doi.org/10.1016/j.conbuildmat.2012.04.132
[31] ASTM C1202-12, Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration, ASTM International, West Conshohocken, PA (2012).
[32] AASHTO T277-86, Rapid determination of the chloride permeability of concrete, American Association of State Highway and Transportation Officials, Washington, DC (1990).
[33] NT Build 492, Concrete, mortar and cement-based repair materials: Chloride migration coefficient from non-steady-state migration experiments, Nordtest Method, Finland (1999).
[34] M.A. Kafi, A. Sadeghi-Nik, A. Bahari, A. Sadeghi-Nik, E. Mirshafiei, Microstructural characterization and mechanical properties of cementitious mortar containing montmorillonite nanoparticles, J. Mater. Civ. Eng. 28 (12) (2016) 04016155. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001670
[35] M. Amin, B.S. Mohammed, M. Lachemi, H.E. Elyamany, Effect of nano-TiO₂ on the rheological, mechanical, and durability properties of cement-based materials: A comprehensive overview, J. Mater. Res. Technol. 9 (4) (2020) 9384–9399. https://doi.org/10.1016/j.jmrt.2020.06.101
[36] R. Madandoust, M. Ghavidel Rizi, M. Moghadamzadeh, Mechanical properties and corrosion resistance of concrete incorporating TiO₂ nanoparticles, Arab. J. Sci. Eng. 39 (2014) 6007–6013. https://doi.org/10.1007/s13369-014-1173-3
[37] T.A. El-Shafie, E. Ismail, A.A. Abdelrahman, E. Mahdy, Mechanical and durability characteristics of nano-TiO₂ concrete exposed to elevated temperature, J. Build. Eng. 26 (2019) 100854. https://doi.org/10.1016/j.jobe.2019.100854
[38] Y. Zhang, X. Zhao, G. Liu, S. Li, Effect of nano-TiO₂ on the mechanical properties and microstructure of high performance concrete, Constr. Build. Mater. 194 (2019) 1–7. https://doi.org/10.1016/j.conbuildmat.2018.11.009
[39] S. Yang, Y. Zhang, Y. Zhang, G. Liu, Effect of nano-TiO₂ on the durability performance of concrete under chloride environment, Constr. Build. Mater. 209 (2019) 491–500. https://doi.org/10.1016/j.conbuildmat.2019.03.168

