Artificial neural network and particle swarm optimization approach to enhance productivity of CNC lathe
Pankaj GUPTA, Rohit MISHRA, Bhagat SINGH
Abstract. This paper suggests a way of increasing productivity and reducing chatter in CNC turning processes. Vibration signals recorded through a microphone were decomposed using a combined Wavelet Denoising and Local Mean Decomposition (WDLMD) method and dominant Product Functions related to the chatter were recreated to be analysed. Different backpropagation algorithms were tested to enhance ANN-based prediction, and the Levenberg-Marquardt algorithm illustrated the lowest average absolute percentage error in predicting Chatter Index and Material Removal Rate. Multi-objective particle swarm optimization was further refined to obtain optimal process parameters including depth of cut (0.32-0.38 mm), spindle speed (1480-1680 rpm), and feed rate (35.5-40 mm/min) that will be used to achieve high quality surface. The strength of the suggested framework was confirmed by further experiments.
Keywords
Stability Analysis, Signal Processing Techniques, Wavelet Denoising, Local Mean Decomposition, Multi-Objective Particle Swarm Optimization
Published online 8/15/2026, 7 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Pankaj GUPTA, Rohit MISHRA, Bhagat SINGH, Artificial neural network and particle swarm optimization approach to enhance productivity of CNC lathe, Materials Research Proceedings, Vol. 71, pp 169-175, 2026
DOI: https://doi.org/10.21741/97816449042312-23
The article was published as article 23 of the book AI-Driven Innovations in Mechanical, Manufacturing, and Energy Engineering
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1]. X. En, Y. Zhang, X. Huang, Y. Li, G. Yang, Time-varying reliability and global sensitivity analysis of regenerative chatter stability in turning considering tool wear, Mech. Based Des. Struct. Mach. (2020). https://doi.org/10.1080/15397734.2020.1823851
[2]. Z. Sahraoui, K. Mehdi, M. Ben-Jaber, Analytical and experimental stability analysis of AU4G1 thin-walled tubular workpieces in turning process, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 234 (2020) 1007–1018. https://doi.org/10.1177/0954405419896115
[3]. T. Delio, J. Tlusty, S. Smith, Use of audio signals for chatter detection and control, J. Manuf. Sci. Eng. 114 (1992) 146–157. https://doi.org/10.1115/1.2899767
[4]. R. Mishra, B. Singh, An ensemble approach to maximize metal removal rate for chatter free milling, J. Comput. Sci. 59 (2022) 101567. https://doi.org/10.1016/j.jocs.2022.101567
[5]. H. Cao, Y. Yue, X. Chen, X. Zhang, Chatter detection based on synchrosqueezing transform and statistical indicators in milling process, Int. J. Adv. Manuf. Technol. 95 (2018) 961–972. https://doi.org/10.1007/s00170-017-1283-0
[6]. M. Uekita, Y. Takaya, Tool condition monitoring technique for deep-hole drilling of large components based on chatter identification in time–frequency domain, Meas. 103 (2017) 199–207. https://doi.org/10.1016/j.measurement.2017.02.035
[7]. Y. Sun, Z. Xiong, An optimal weighted wavelet packet entropy method with application to real-time chatter detection, IEEE/ASME Trans. Mechatronics. 21 (2016) 2004–2014. https://doi.org/10.1109/TMECH.2016.2547481
[8]. J. Lian, Z. Liu, H. Wang, X. Dong, Adaptive variational mode decomposition method for signal processing based on mode characteristic, Mech. Syst. Signal Process. 107 (2018) 53–77. https://doi.org/10.1016/j.ymssp.2018.01.019
[9]. P. Gupta, B. Singh, Local mean decomposition and artificial neural network approach to mitigate tool chatter and improve material removal rate in turning operation, Appl. Soft Comput. 96 (2020) 106714. https://doi.org/10.1016/j.asoc.2020.106714
[10]. Y. Hu, Y. Zhang, D. Gong, Multiobjective particle swarm optimization for feature selection with fuzzy cost, IEEE Trans. Cybern. 51 (2021) 874–888. https://doi.org/10.1109/TCYB.2020.3015756
[11]. M. Rong, D. Gong, Y. Zhang, Y. Jin, W. Pedrycz, Multidirectional prediction approach for dynamic multiobjective optimization problems, IEEE Trans. Cybern. 49 (2019) 3362–3374. https://doi.org/10.1109/TCYB.2018.2842158
[12]. P. Gupta, B. Singh, Exploration of tool chatter in CNC turning using a new ensemble approach, Mater. Today Proc. 43 (2020) 640–645. https://doi.org/10.1016/j.matpr.2020.11.1005
[13]. M. Wiercigroch, E. Budak, Sources of nonlinearities, chatter generation and suppression in metal cutting, Philos. Trans. R. Soc. A Math. Phys. Eng. Sci. 359 (2001) 663–693. https://doi.org/10.1098/rsta.2000.0750
[14]. Y. Altintas, Manufacturing automation: metal cutting mechanics, machine tool vibrations, and CNC design, second ed., Cambridge University Press, Cambridge, 2012. https://doi.org/10.1017/CBO9780511843723
[15]. P. Gupta, B. Singh, Investigation of tool chatter features at higher metal removal rate using sound signals, Acoust. Aust. 48 (2020) 141–148. https://doi.org/10.1007/s40857-020-00180-8

