Printability and functional performance of DIW-fabricated LSR/TiO₂ composite ink

Printability and functional performance of DIW-fabricated LSR/TiO₂ composite ink

Jhunjhun Kumar MISHRA, Vishal FRANCIS

Abstract. Direct Ink Writing (DIW) has become an effective additive manufacturing method to print complex structures of elastomers with high-viscosity printable inks. As part of this research, LSR/TiO₂ composite inks were developed and tested to determine their printability and functional performance in DIW processing. The preparations of 5 ink compositions with 1-5 wt% TiO₂ nanoparticles were first performed with liquid silicone rubber (LSR), catalyst, and glycerol as a rheological modifier. A pre-trial experiment was carried out to determine the extrusion characteristics and dimensional stability of the developed inks. Among the tested compositions, the one with 5 wt% TiO₂ was found to be the most stable in forming filaments and for the purpose of giving excellent geometry retention upon deposition. Thus, this ink was optimized and chosen to perform another characterization of the material and printing analyses. The rheological measurements showed that the higher the content of TiO₂, the more the rheology was increased and extrusion was achievable. The X-ray diffraction analysis revealed the existence of rutile-phase TiO₂ in the silicone matrix without any change of structure. Thermogravimetric analysis demonstrated the existence of good thermal stability of the composite to about 350°C, and scanning electron microscopy depicted the relatively uniform distribution of nanoparticles in the elastomer matrix. Moreover, DIW printing experiments were able to print different geometries such as straight filaments, rectilinear tracks, multilayer sheets, and solid discs with controlled processing environments. The findings indicate that the developed LSR/TiO₂ composite ink has the right rheological, structural, and thermal qualities to be confidently DIW-fabricated silicone-based functional structures.

Keywords
Additive Manufacturing, Composite Ink, Direct Ink Writing, Liquid Silicone Rubber, Titanium Dioxide

Published online 8/15/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Jhunjhun Kumar MISHRA, Vishal FRANCIS, Printability and functional performance of DIW-fabricated LSR/TiO₂ composite ink, Materials Research Proceedings, Vol. 71, pp 97-104, 2026

DOI: https://doi.org/10.21741/97816449042312-13

The article was published as article 13 of the book AI-Driven Innovations in Mechanical, Manufacturing, and Energy Engineering

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] V. Francis and P.K. Jain, 3D printed polymer dielectric substrates with enhanced permittivity by nanoclay inclusion, Virtual Phys. Prototyp. 12 (2017) 203–210. https://doi.org/10.1080/17452759.2017.1312466
[2] A.A.B.A. Ali, H. Ahmad, H. Yap and H.A. Ismail, Investigation of electrical properties of TiO₂ nanocomposite-based polymer, J. Phys.: Conf. Ser. 2120 (2021) 012031. https://doi.org/10.1088/1742-6596/2120/1/012031
[3] M. Razzaghi-Kashani, S. Javadi and N. Gharavi, Dielectric properties of silicone rubber–titanium dioxide composites prepared by dielectrophoretic assembly of filler particles, Smart Mater. Struct. 19 (2010) 035019. https://doi.org/10.1088/0964-1726/19/3/035019
[4] S.A. Qenawy, L.S. Nasrat, H.M. Ismail and J.N. Asaad, Evaluation of dielectric strength of SiR/TiO₂ composites using feed-forward neural network, IET Nanodielectr. 3 (2020) 74–80.
[5] C. Tugui, M. Cazacu, D.M. Manoli, A. Stefan and M. Duduta, All-silicone 3D printing technology: Toward highly elastic dielectric elastomers and complex structures, ACS Appl. Polym. Mater. 5 (2023) 7936–7946.
[6] T. Yang, C. Wang, L. Liu and L. Zhang, Silicone elastomer dielectric composites by introducing novel O-MMT@TiO₂ nanoparticles for energy harvesting application, Compos. Part A Appl. Sci. Manuf. 185 (2024) 108351. https://doi.org/10.1016/j.compositesa.2024.108351
[7] C.C. Uydur, Assessment of dielectric strength for 3D printed solid materials in terms of insulation coordination, Appl. Sci. 14 (2024) 11860. https://doi.org/10.3390/app142411860
[8] F. Akin and O. Arikan, Effect of thermal aging on solid insulating materials under different voltage levels and frequencies, Eng. Fail. Anal. 148 (2023) 107222.
[9] D. Kalaš, K. Šíma, P. Kadlec, R. Polanský, R. Soukup, J. Řeboun and A. Hamáček, FFF 3D printing in electronic applications: Dielectric and thermal properties of selected polymers, Polymers 13 (2021) 3702. https://doi.org/10.3390/polym13213702
[10] F. Jia, C. Liu, B. Yang, A. Lee, L. Wu and H. Ning, Preparation of graphene/silicone rubber nanocomposite dielectric foams, Polymers 14 (2022) 3273. https://doi.org/10.3390/polym14163273
[11] J.K. Mishra and V. Francis, Optimization of direct ink writing process parameters for liquid silicone rubber/TiO₂ composite ink, J. Polym. Compos. 13 (2025) 240–259. https://doi.org/10.37591/JOPC.v13i06.233033
[12] F. Madidi, G. Momen and M. Farzaneh, Dielectric properties of TiO₂/silicone rubber micro- and nanocomposites, Adv. Mater. Sci. Eng. (2018) 4682076.
[13] X. Sui, W. Zhou, L. Dong, Z. Wang, X. Liu, A. Zhou, J. Cai and Q. Chen, Fiber-reinforced silicone rubber composites with enhanced dielectric and thermal properties, Adv. Polym. Technol. 37 (2018) 1507–1516.
[14] N. Wen, L. Zhang, D. Jiang, Z. Wu, B. Li, C. Sun and Z. Guo, Emerging flexible sensors based on nanomaterials: Recent status and applications, J. Mater. Chem. A 8 (2020) 25499–25527. https://doi.org/10.1039/d0ta09556g
[15] A. M’Barki, L. Bocquet and A. Stevenson, Linking rheology and printability for dense and strong ceramics by direct ink writing, Sci. Rep. 7 (2017) 6017. https://doi.org/10.1038/s41598-017-06115-0
[16] A. Das, E.L. Gilmer, S. Biria and M.J. Bortner, Importance of polymer rheology on material extrusion additive manufacturing: Correlating process physics to print properties, ACS Appl. Polym. Mater. 3 (2021) 1218–1249.
[17] Y. Shao, R. Han, X. Quan and K. Niu, Study on ink flow of silicone rubber for direct ink writing, J. Appl. Polym. Sci. 138 (2021) 50819. https://doi.org/10.1002/app.50819
[18] C. Mo, R. Yin and J.R. Raney, Direct ink writing of tough, stretchable silicone composites, Soft Matter 18 (2022) 7341–7347. https://doi.org/10.1039/D2SM0023D
[19] M.A.S.R. Saadi et al., Direct ink writing: A 3D printing technology for diverse materials, Adv. Mater. 34 (2022) 2108855. https://doi.org/10.1002/adma.202108855
[20] S. Tagliaferri, A. Panagiotopoulos and C. Mattevi, Direct ink writing of energy materials, Mater. Adv. 2 (2021) 540–563.