Heat Transfer Analysis of Ultra-High-Temperature Ceramics in Plasma Wind Tunnel Experiments
Anselmo CECERE, Dylan DE PRISCO, Gennaro CORBI, Raffaele COSTANZO, Sergio CASSESE, Stefano MUNGIGUERRA, Raffaele SAVINO
Abstract The transient thermal response of ZrB2-SiC is investigated in Plasma Wind Tunnel tests using the Small Planetary Entry Simulator, an arc jet facility capable of simulating the harsh conditions of atmospheric reentry with total specific enthalpies up to 20 MJ/kg. Numerical analyses of the high enthalpy flow are carried out considering thermal and chemical non-equilibrium conditions and catalytic surface recombination coefficients of the ZrB2-SiC sample. Results showed thermal and chemical non equilibrium flow conditions for the generated plasma and a weakly catalytic behavior for this type of materials.
Keywords
Hypersonic Flows, UHTC Materials, Thermo-Chemical Nonequilibrium, Atmospheric ReEntry
Published online 8/15/2026, 4 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Anselmo CECERE, Dylan DE PRISCO, Gennaro CORBI, Raffaele COSTANZO, Sergio CASSESE, Stefano MUNGIGUERRA, Raffaele SAVINO, Heat Transfer Analysis of Ultra-High-Temperature Ceramics in Plasma Wind Tunnel Experiments, Materials Research Proceedings, Vol. 70, pp 8-11, 2026
DOI: https://doi.org/10.21741/9781644904299-2
The article was published as article 2 of the book HEATS Workshop 2026
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] J. D. Schmisseur, “Hypersonics into the 21st century: A perspective on AFOSR-sponsored research in aerothermodynamics”, Progress in Aerospace Sciences, Volume 72, January 2015. https://doi.org/10.1016/j.paerosci.2014.09.009
[2] A. Cecere, R. Savino, C. Allouis, F. Monteverde, Heat transfer in ultra-high temperature advanced ceramics under high enthalpy arc-jet conditions, International Journal of Heat and Mass Transfer, Volume 91, 2015, Pages. 747-755. https://doi.org/10.1016/j.ijheatmasstransfer.2015.08.029
[3] S. Mungiguerra, G.D. Di Martino, A. Cecere, R. Savino, L. Silvestroni, A. Vinci, L. Zoli, D. Sciti, “Arc-jet wind tunnel characterization of ultra-high-temperature ceramic matrix composites”, Corrosion Science, Volume 149, 1 April 2019, Pages 18-28.
[4] D. Sciti, et al., “Elevated temperature performance: Arc-jet testing of carbon fiber reinforced ZrB2 bars up to 2200 °C for strength retention assessment”, Journal of Advanced Ceramics, vol. 14, 2025. https://doi.org/10.26599/JAC.2024.9221022
[5] L. Silvestroni, R. Savino, A. Cecere, S. Mungiguerra, “Failure tolerant functionally graded fiber-reinforced UHTCs exposed to hypersonic flows”, Composites Part A: Applied Science and Manufacturing, vol. 185, 2024. https://doi.org/10.1016/j.compositesa.2024.108293
[6] R. Savino, M. De Stefano Fumo, D. Paterna, A. Di Maso, F. Monteverde, “Arc-jet testing of ultra-high-temperature-ceramics”, Aerospace Science and Technology, Volume 14, Issue 3, April-May 2010, Pages 178-187. https://doi.org/10.1016/j.ast.2009.12.004
[7] V. Carandente, R. Savino, A. Esposito, G. Zuppardi, V. Caso, “Experimental and numerical simulation, by an arc-jet facility, of hypersonic flow in Titan’s atmosphere”, Experimental Thermal and Fluid Science, Volume 48, July 2013, Pages 97-101. https://doi.org/10.1016/j.expthermflusci.2013.02.012
[8] Marschall J., et al., “Catalytic Atom Recombination on ZrB2-SiC and HfB2-SiC Ultra-high-Temperature Ceramic Composites”, J. Spacecraft Rockets, (2004). https://doi.org/10.2514/1.2879

