Aero-Propulsive Modeling and System Identification of a Distributed Electric Propulsion Flying Model
Giorgio FILIPPOLI, Niko TERZAROLI, Beniamino M. PERRI, Lorenzo MASSA, Stefano CACCIOLA, Lorenzo TRAINELLI Carlo E. D. RIBOLDI
Abstract. This contribution illustrates a novel approach to aero-propulsive modeling and system identification for Distributed Electric Propulsion (DEP) aircraft. The placement of multiple propellers along the wing leading edge significantly alters the flow field, affecting both performance and flying qualities. A direct modeling approach based on simplified theoretical formulations is insufficient to accurately predict the complex behavior of the aircraft. Therefore, model identification is necessary to achieve some insight on the phenomenon. Based on the identified model, the aim is twofold: to generalize the modeling for aircraft design and analysis, and to develop a high-fidelity simulation tool for control law synthesis and advanced applications. The flight test campaign supporting the identification activities was carried out through fully automated flight tests using the scaled DEP demonstrator SwitchMaster, as discussed in [1].
Keywords
Distributed Electric Propulsion, Model Identification, Automated Flight Test Procedures, Aero-Propulsive Coupling
Published online 7/20/2026, 6 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Giorgio FILIPPOLI, Niko TERZAROLI, Beniamino M. PERRI, Lorenzo MASSA, Stefano CACCIOLA, Lorenzo TRAINELLI Carlo E. D. RIBOLDI, Aero-Propulsive Modeling and System Identification of a Distributed Electric Propulsion Flying Model, Materials Research Proceedings, Vol. 69, pp 457-462, 2026
DOI: https://doi.org/10.21741/9781644904251-83
The article was published as article 83 of the book CEAS – AIDAA Conference 2025
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Cacciola S., Filippoli G., Perri B. M., Riboldi C. E. D., Terzaroli N., Trainelli L., “Autonomous Flight Tests of a Distributed Electric Propulsion Demonstrator Based on a Total Energy Control System”, 11th European Conference for Aeronautics and Aerospace Sciences (EUCASS), Rome, Italy, 2025.
[2] Hoogreef M.F.M., de Vries R., Sinnige T. and Vos R., “Synthesis of aero-propulsive interaction studies applied to conceptual hybrid-electric aircraft design”, AIAA Scitech 2020 Forum, Orlando, USA, January 6–10, 2020. https://doi.org/10.2514/6.2020-0503
[3] Trainelli L., Riboldi C. E. D., Cacciola S., “Design, Implementation and Testing of a Distributed Electric Propulsion Demonstrator”, 2023 Annual Society of Flight Test Engineers European Chapter Symposium, Rome, Italy, May 16-17, 2023.
[4] Cacciola S., Bottà L., Riboldi C. E. D., Trainelli L., “Identification of the Impact of Blowing on the Aerodynamic Model of an Airplane with Distributed Electric Propulsion”, 34th ICAS Congress, Firenze, Italy, September 9-13, 2024.
[5] Trainelli L., Filippoli G., Terzaroli N., Perri B. M., Cacciola S., Riboldi C. E. D., “Automated Flight Testing of a Distributed Electric Propulsion Flying Model”, 10th CEAS Aerospace Europe Conference / 28th AIDAA International Congress, Turin, Italy, December 1–4, 2025.
[6] Filippoli G., Perri B. M., Terzaroli N., Trainelli L., Cacciola S., Riboldi C. E. D., “Development of an Autonomous Flight Control System for a Distributed Electric Propulsion Flying Model”, 10th CEAS Aerospace Europe Conference / 28th AIDAA International Congress, Turin, Italy, December 1–4, 2025.
[7] Vladislav Klein and Eugene A. Morelli, “Aircraft system identification: theory and practice”, AIAA education series, Reston, American Institute of Aeronautics and Astronautics, 2006, isbn: 978-1-56347-832-1.

