Smart Composite for Structural Health Monitoring: Using Copper Wires for Strain Sensing

Smart Composite for Structural Health Monitoring: Using Copper Wires for Strain Sensing

Antonio Paolo Fontanella, Matteo Febo, Ester D’Accardi, Davide Palumbo, Umberto Galietti, Francesco Ciampa, Maria Cinefra

Abstract. This study presents a multifunctional Carbon Fiber Reinforced Polymer (CFRP) composite integrating embedded copper wires for Structural Health Monitoring (SHM) through strain-induced resistance variation. The monitoring principle relies on the linear relationship between mechanical strain and the change in electrical resistance of the copper wires. A preliminary feasibility test was carried out through a three-point bending experiment up to failure, with real-time resistance acquisition managed by an Arduino Giga R1 WiFi controller. A complementary Finite Element Method (FEM) analysis in Ansys was employed to predict wire deformation and corresponding resistance change. The first correlation between the experimental and numerical results confirms the effectiveness of the proposed sensing approach as a continuous, non-invasive, and cost-efficient strain monitoring technique for advanced composite structures.

Keywords
Structural Health Monitoring, Smart Composite, Passive Sensors, Copper Wires, Strain Sensing

Published online 7/20/2026, 6 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Antonio Paolo Fontanella, Matteo Febo, Ester D’Accardi, Davide Palumbo, Umberto Galietti, Francesco Ciampa, Maria Cinefra, Smart Composite for Structural Health Monitoring: Using Copper Wires for Strain Sensing, Materials Research Proceedings, Vol. 69, pp 1341-1346, 2026

DOI: https://doi.org/10.21741/9781644904251-233

The article was published as article 233 of the book CEAS – AIDAA Conference 2025

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] W. Adeyemi, W. Khor, F. Ciampa, Material-Enabled Impact Detection and Damage Localisation System Using Shape Memory Alloy Tufted Composites. Sensors 2023, 23, 9565. https://doi.org/10.3390/s23239565
[2] H. Rocha, C. Semprimoschnig, J.P. Nunes, Sensors for process and structural health monitoring of aerospace composites: A review,Engineering Structures, 2021, https://doi.org/10.1016/j.engstruct.2021.112231
[3] E.R. Cosau, V. Goanta, I. Blanari, L. Alkisswani, F. Samara, Determination of Tensile Characteristics and Electrical Resistance Variation of Cables Used for Charging Electric Vehicles. Polymers fammi , 17, 1317. https://doi.org/10.3390/polym17101317
[4] J.-W. J.-P. Song, Hong, Y.-J. An, S.-H. Son, J.-S. Park, S.-H. Kim, S.-H. Kang, J.-H. Kang, Evaluation of the Mechanical and Electrical Properties of Multistage Drawn Copper-Clad Aluminum Wire After Annealing Process. Metals 2024, 14, 1386. https://doi.org/10.3390/met14121386
[5] G. Uribe-Riestra, P. Ayuso-Faber, M. Rivero-Ayala, J. Cauich-Cupul, F. Gamboa, F. Avilés. Structural health monitoring of carbon nanotube-modified glass fiber-reinforced polymer composites by electrical resistance measurements and digital image correlation. Structural Health Monitoring. 2023; https://doi.org/10.1177/14759217231173439