Conceptual Structural Design of a Pressurized Inflatable and Deployable Habitat Optimized for Lunar Surface Missions
Alfonso CAIAZZO, Giuseppe PETRONE, Alessandro CASABURO, Sergio DE ROSA, Francesco FRANCO
Abstract. Inflatable and deployable structures are increasingly recognized as a promising solution for long-duration missions on the Moon and beyond. This study addresses the conceptual design and preliminary assessment of a pressurized habitat intended for lunar surface deployment. Three geometric configurations have been evaluated in terms of mass efficiency, stress distribution, and habitability. The fabric restraint shell, made of aluminized Kapton Kevlar (AKK) and sized with a safety factor of four, was combined with a carbon-fiber-reinforced floor designed to support astronaut loads and internal equipment. The cylindrical configuration proved the most suitable option due to its reduced structural mass, modularity, and ease of deployment. A finite element model was developed to investigate static pressurization and thermal loads, confirming structural adequacy with acceptable stress and displacement levels. A digital habitability analysis using anthropometric mannequins further validated the spatial configuration. Finally, a dynamic inflation analysis with LS-DYNA has been done to capture the stress-strain evolution.
Keywords
Inflatable Structures, Deployable Structures, Structural Design, Static Analysis, Dynamic Analysis, Flexible Materials
Published online 7/20/2026, 5 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Alfonso CAIAZZO, Giuseppe PETRONE, Alessandro CASABURO, Sergio DE ROSA, Francesco FRANCO, Conceptual Structural Design of a Pressurized Inflatable and Deployable Habitat Optimized for Lunar Surface Missions, Materials Research Proceedings, Vol. 69, pp 1278-1282, 2026
DOI: https://doi.org/10.21741/9781644904251-221
The article was published as article 221 of the book CEAS – AIDAA Conference 2025
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Caiazzo, Alfonso, et al.” Structures for Extraterrestrial Habitat: A Review”. Acta Astronautica Vol. 238, pp. 471-493, 2026. ISSN: 0094-5765. https://doi.org/10.1016/j.actaastro.2025.10.029
[2] Connolly, J. H. and Arch, M., 2005, “NASA Standard 3000 Human Systems Integration Standards (HSIS) Update,” Proceedings of the Human Factors and Ergonomics Society Annual Meeting, Vol. 49, SAGE Publications Sage CA: Los Angeles, CA, Paper No. 23, pp. 2018-2022. https://doi.org/10.1177/154193120504902304
[3] Whitmore, M., Boyer, J., and Holubec, K., 2012, “NASA-STD-3001, spaceflight human system standard and the human integration design handbook,” Industrial and systems engineering research conference, 19-23 May 2012, Paper No. JSC-CN-25695.
[4] Naser, M. Z., Redmond, L., Chen, Q., and Rangaraju, P. “Habitats for Space Exploration: Construction Materials, Design Concepts, and Future Directions.” In The Planning and Execution of Human Missions to the Moon and Mars, Chapter 8, pp. 229-266, AIAA, 2023. https://doi.org/10.2514/5.9781624106545.0229.0266
[5] Smith, Marshall, et al.” The Artemis program: An overview of NASA’s activities to return humans to the moon.” IEEE Aerospace Conference, 7-14 March 2020. IEEE, 2020. https://doi.org/10.1109/AERO47225.2020.9172323
[6] Davis, Chad L., and Ken Peek.” Feasibility study for using Cygnus as a habitat in deep space exploration.” AIAA SPACE, 13-16 September 2016, Long Beach, California. eISBN: 978-1-62410-427-5.
[7] Niu, M. C. Y. “Airframe Stress Analysis and Sizing.” Adaso/Adastra Engineering Center (2011): ISBN 978-9627128083.
[8] Liu, Tian-Wei, et al.” Folding behavior of thin-walled tubular deployable composite boom for space applications: Experiments and numerical simulation.” Acta Astronautica, 209, (2023): 159-171. https://doi.org/10.1016/j.actaastro.2023.05.010

