Low-Velocity Impact Analysis of Composite Plates using the Hashin 3D Criterion and Layer-Wise Models
Marco PETROLO, Matteo FILIPPI, Erasmo CARRERA, Chiara FRANCESCHINI, Elisa TORTORELLI
Abstract. Numerical simulations are an essential tool for predicting structural response under low-velocity impact and for damage evolution. The present work investigates the low-velocity impact (LVI) response of composite laminate plates by applying the Carrera Unified Formulation (CUF) for structural modelling combined with a fully three-dimensional (3D) Hashin failure criterion for damage evaluation. Previous studies have employed two-dimensional (2D) Hashin criteria, combined with cohesive zone models, to detect intralaminar and interlaminar damage. However, such approaches neglect out-of-plane stress components, which are critical in impact scenarios. The methodology discussed overcomes this limitation by adopting the 3D Hashin criterion within each ply, thereby allowing all six stress components to be included and providing a more accurate prediction of intralaminar damage and interlaminar delamination activation. The numerical model is developed within the CUF framework, using higher-order structural theories based on Lagrange polynomial expansions and a layer-wise representation through the laminate thickness. The results highlight the accuracy of the proposed approach and its computational cost advantages.
Keywords
Carrera Unified Formulation (CUF), Low-Velocity Impact, Higher-Order Structural Modeling, Continuum Damage Mechanics, Delamination
Published online 7/20/2026, 5 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Marco PETROLO, Matteo FILIPPI, Erasmo CARRERA, Chiara FRANCESCHINI, Elisa TORTORELLI, Low-Velocity Impact Analysis of Composite Plates using the Hashin 3D Criterion and Layer-Wise Models, Materials Research Proceedings, Vol. 69, pp 1171-1175, 2026
DOI: https://doi.org/10.21741/9781644904251-201
The article was published as article 201 of the book CEAS – AIDAA Conference 2025
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] D. Xie, A. G. Salvi, A. M. Waas, and A. Caliskan, “Discrete cohesive zone model to simulate static fracture in carbon fiber textile composites”, in Proc. 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conf., Austin, Apr. 2005, AIAA Paper 2005-2320. https://doi.org/10.2514/6.2005-2320
[2] C. Zhao, B. N. Fedulov, C. Liu, K. Zhang, and H. Liu, “Establishment and development of an incremental constitutive model for CFRP considering the impact adiabatic effect”, Aerotecnica Missili & Spazio, 2025. https://doi.org/10.1007/s42496-025-00261-9
[3] E. Carrera, M. Cinefra, M. Petrolo, and E. Zappino, “Finite Element Analysis of Structures through Unified Formulation”, Hoboken, NJ, USA: Wiley, 2014. https://doi.org/10.1002/9781118536643
[4] M. Petrolo, E. Tortorelli, S. Saputo, and E. Carrera, “Tensile damage analysis of composite structures based on 3D Hashin failure criteria and 2D higher-order structural theories”, Int. J. Non-Linear Mech., vol. 127, Art. no. 103591, 2020.
[5] M. Petrolo, E. Tortorelli, S. Saputo, “Compressive damage analysis of composite structures using 3D failure criteria and 2D higher-order structural theories”, Mechanics of Advanced Materials and Structures, 2025. https://doi.org/10.1080/15376494.2025.2489138
[6] Y. Zhang, W. Van Paepegem, and W. De Corte, “An enhanced progressive damage model for laminated fiber-reinforced composites using the 3D Hashin failure criterion: A multi-level analysis and validation”, Materials, vol. 17, no. 21, Art. no. 7681, 2024. https://doi.org/10.3390/ma17215176
[7] M. H. Nagaraj, E. Carrera, and M. Petrolo, “Progressive damage analysis of composite laminates subjected to low-velocity impact using 2D layer-wise structural models”, Int. J. Non-Linear Mech., vol. 127, Art. no. 103591, 2020. https://doi.org/10.1016/j.ijnonlinmec.2020.103591
[8] I. Kaleel, E. Carrera, and M. Petrolo, “Progressive delamination of laminated composites via 1D models”, Composite Structures, 235:111799, 2020. https://doi.org/10.1016/j.compstruct.2019.111799
[9] P.P. Camanho, C.G. Davila, and M.F. De Moura, “Numerical simulation of mixed-mode progressive delamination in composite materials”, Journal of composite materials, 2003. https://doi.org/10.1177/0021998303034505
[10] Y. Shi, T. Swait, C. Soutis, “Modelling damage evolution in composite laminates subjected to low velocity impact”, Composite Structures, Volume 94, Issue 9, 2012. https://doi.org/10.1016/j.compstruct.2012.03.039
[11] M. H. Nagaraj, J. Reiner, R. Vaziri, E. Carrera, and M. Petrolo, “Progressive damage analysis of composite structures using higher-order layer-wise elements”, Compos. Part B Eng., vol. 200, Art. no. 107921, 2020. https://doi.org/10.1016/j.compositesb.2020.107921

