Experimental Study of Vibration Levels in Microjet Engine Prototype Considering Venturi Intake Influence

Experimental Study of Vibration Levels in Microjet Engine Prototype Considering Venturi Intake Influence

Cornel-Mihai TĂRĂBÎC, Andrei-George TOTU, Grigore Cican

Abstract. This paper presents a study on the functionality of a microjet engine prototype, developed by COMOTI – Romanian Research and Development Institute for Gas Turbines focusing on vibration, FFT analysis and speed extraction across all four operating regimes. Despite the compact size, the microjet engines are emerging as a solution for propulsion units for drones, small electrical generator unit or other particular application for civil and military domain. However, even at this scale, prototype designs can exhibit significant vibration levels that compromise structural integrity, mission reliability and the functionality in terms of performance. During these experiments, three single axis accelerometers from PCB were mounted on the metal structure supporting the engine and one triple axis accelerometer was mounted on the engine, near the compressor in a relatively cool region of the flow path. The experimental campaign aimed to evaluate the influence of intake geometry on the vibrational behavior of the engine. Two configurations were tested: one equipped with a Venturi-type air intake and one with a direct open inlet, lacking any aerodynamic shaping at the compressor entry. The test stand was realized using compactDAQ hardware from National Instruments with LabVIEW software for main and auxiliary parameters and PCB accelerometers with Dewesoft software for vibration levels and speed extraction.Results showed that the venturi intake can influence the vibrational levels for the engine during start-up, idle, working and shutdown regimes compared with the second configuration, without the venturi intake.

Keywords
Microjet Prototypes, Experimental Testing, Venturi Intake, Structural Dynamics

Published online 7/20/2026, 6 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Cornel-Mihai TĂRĂBÎC, Andrei-George TOTU, Grigore Cican, Experimental Study of Vibration Levels in Microjet Engine Prototype Considering Venturi Intake Influence, Materials Research Proceedings, Vol. 69, pp 595-600, 2026

DOI: https://doi.org/10.21741/9781644904251-106

The article was published as article 106 of the book CEAS – AIDAA Conference 2025

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] Catana, R.M.; Cican, G.; Badea, G.-P. Thermodynamic Analysis and Performance Evaluation of Microjet Engines in Gas Turbine Education. Appl. Sci. 2024, 14, 6754. https://doi.org/10.3390/app14156754
[2] Banihabib, R.; Assadi, M. The Role of Micro Gas Turbines in Energy Transition. Energies 2022, 15, 8084. https://doi.org/10.3390/en15218084
[3] Amici, C.; Ceresoli, F.; Pasetti, M.; Saponi, M.; Tiboni, M.; Zanoni, S. Review of Propulsion System Design Strategies for Unmanned Aerial Vehicles. Appl. Sci. 2021, 11, 5209. https://doi.org/10.3390/app11115209
[4] Rossi, I., & Traverso, A. (2018). AMBIENT TEMPERATURE IMPACT ON MICRO GAS TURBINES: EXPERIMENTAL CHARACTERIZATION. Acta Polytechnica CTU Proceedings, 20, 78-85. https://doi.org/10.14311/APP.2018.20.0078
[5] G. Żywica, T. Z. Kaczmarczyk, Breńkacz, M. Bogulicz, A. Andrearczyk, and P. Bagiński, “Investigation of dynamic properties of the microturbine with a maximum rotational speed of 120 krpm – predictions and experimental tests,” Journal of Vibroengineering, Vol. 22, No. 2, pp. 298–312, Mar. 2020, https://doi.org/10.21595/jve.2019.20816
[6] Heng, X.; Zhang, H.; Wang, A.; Zhang, W. The Effect of Support Misalignment on Vibration Characteristics of Aero-Engine Rotor Systems under Ultra-High Operating Speeds. Machines 2024, 12, 669. https://doi.org/10.3390/machines12100669
[7] Tărăbîc, C.M.; Cican, G.; Olariu, C.; Dediu, G.; Catană, R.M. Test Stand for Microjet Engine Prototypes. Machines 2024, 12, 688. https://doi.org/10.3390/machines12100688
[8] Tărăbîc, C.M.; Olariu, C.; Cican, G.; Dediu, G.; Secăreanu, R.A.; Suciu, C.P.; Hank, A. Instrumentation and data acquisition system for microjet engines—Prototypes. Turbo 2023, X, 1.