Energy Efficiency Management through Production Scheduling Using FlexSim Simulation and Integration of Renewable Energy Sources
Marek KRYNKE, Robert ULEWICZ
Abstract. The article presents a methodology for managing energy consumption and scheduling production processes using discrete-event simulation in FlexSim combined with the Flexon Helios energy module. The approach enables modeling of production flows, machine scheduling, and energy consumption analysis, taking into consideration renewable energy sources such as photovoltaic installations. A representative case study is presented, including energy-intensive processes such as thermal treatment and finishing operations, highlighting how scheduling tasks in alignment with available renewable energy can reduce grid energy consumption without affecting production throughput. The proposed methodology offers a practical framework suitable for various industrial processes, enabling improved energy efficiency and flexible production planning.
Keywords
Simulation, Flexsim, Energy Management, Sustainable Production, Photovoltaic, CO₂ Emissions, Schedule Optimization
Published online 1/25/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Marek KRYNKE, Robert ULEWICZ, Energy Efficiency Management through Production Scheduling Using FlexSim Simulation and Integration of Renewable Energy Sources, Materials Research Proceedings, Vol. 62, pp 326-333, 2026
DOI: https://doi.org/10.21741/9781644904015-42
The article was published as article 42 of the book Terotechnology XIV
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] B. Gabrielyan et al., Energy efficiency in household sector, Production Engineering Archives 30 (2024) 136-144. https://doi.org/10.30657/pea.2024.30.13
[2] A. Wójcik-Mazur et al., Management of photovoltaic energy efficiency in smes in the light of the concept of corporate social responsibility, Polish Journal of Management Studies 24 (2021) 472-489. https://doi.org/10.17512/pjms.2021.24.1.28
[3] A. Idzikowski et al., Increasing the ecological efficiency of monocrystalline photovoltaic power plants by management their life cycle assessment, Energies 18 (2025) art. 4775. https://doi.org/10.3390/en18174775
[4] J. Bień, B. Bień, Rapid assessment of solar PV micro-system energy and greenhouse gas emissions in Poland, Production Engineering Archives 30 (2024) 326–332. https://doi.org/10.30657/pea.2024.30.32
[5] R. Ulewicz et al., Multi-Criteria Method for the Selection of Renewable Energy Sources in the Polish Industrial Sector, Energies 14 (2021) art. 2386. https://doi.org/10.3390/en14092386
[6] M. Ingaldi, R. Ulewicz, Sustainable development and technological advancements in industry 4.0: overcoming barriers in SME sector integration, Management Systems in Production Engineering 33 (2025) 144-162. https://doi.org/10.2478/mspe-2025-0015
[7] S. Pawlak, Computer simulations in planning production processes. Production Engineering Archives 31 (2025) 183-189. https://doi.org/10.30657/pea.2025.31.18
[8] J. Rosak-Szyrocka, K. Knop, Navigating the fourth industrial revolution: insights from a comprehensive bibliometric study on industry 4.0, Production Engineering Archives 30 (2024) 501-519. https://doi.org/10.30657/pea.2024.30.47
[9] M. Krynke, Analysis of the impact of effective time management on workstation efficiency using a multi-criteria optimization approach. Management Systems in Production Engineering 31 (2023) 306-311. https://doi.org/10.2478/mspe-2023-0034
[10] M. Beaverstock et al., Applied simulation modeling and analysis using FlexSim, 5th Ed. FlexSim Software Products, Inc, 2017.
[11] Flexcon Helios Tutorial. Available online: https://docs.flexsim.com/en/25.1/modules/Helios/ Tutorials/BasicTutorial.html#app (accessed 2025-10-20)
[12] T. Huld et al., A new solar radiation database for estimating PV performance in Europe and Africa, Solar Energy 86 (2012) 1803-1815. https://doi.org/10.1016/j.solener.2012.03.006
[13] JRC European Commission, Photovoltaic Geographical Information System (PVGIS-SARAH2). Available online: https://re.jrc.ec.europa.eu/pvg_tools/en/ (accessed 2025-10-20).
[14] S. Maleczek et al., Tests of Acid Batteries for Hybrid Energy Storage and Buffering System—A Technical Approach, Energies 15 (2022) art. 3514. https://doi.org/10.3390/en15103514
[15] Ł.J. Orman et al., Comparative Analysis of Indoor Environmental Quality and Self-Reported Productivity in Intelligent and Traditional Buildings, Energies 16 (2023) art. 6663. https://doi.org/10.3390/en16186663
[16] A. Pacana, D. Siwiec, Method of Fuzzy Analysis of Qualitative-Environmental Threat in Improving Products and Processes (Fuzzy QE-FMEA), Materials 16 (2023) art. 1651. https://doi.org/10.3390/ma16041651
[17] O. Gumen et al., Research of thermal processes in industrial premises with energy-saving technologies of heating, Diagnostyka 18 (2017) 43-49.
[18] N. Radek et al., Formation of coatings with technologies using concentrated energy stream, Production Engineering Archives 28 (2022) 117-122. https://doi.org/10.30657/pea.2022.28.13
[19] A. Bartkowska et al., Microstructure, microhardness, corrosion resistance and chemical composition of Mo, B and Mo-B coatings produced using laser processing, Materials 13 (2020) art. 3249. https://doi.org/10.3390/MA13153249
[20] N. Radek, R. Dwornicka, Fire properties of intumescent coating systems for the rolling stock, Communications – Scientific Letters of the University of Žilina 22 (2020) 90-96. https://doi.org/10.26552/com.C.2020.4.90-96
[21] N. Radek et al., Operational properties of DLC coatings and their potential application, METAL 2022 – 31st Int. Conf. Metall. Mater., (2022) 531-536. https://doi.org/10.37904/metal.2022.4491
[22] O. Kierat et al., The effect of the corrosion medium on silane coatings deposited on titanium grade 2 and titanium alloy Ti13Nb13Zr, Materials 14 (2021) art. 6350. https://doi.org/10.3390/ma14216350
[23] T. Lipiński, J. Pietraszek, Corrosion of the S235JR Carbon Steel after Normalizing and Overheating Annealing in 2.5% Sulphuric Acid at Room Temperature, Materials Research Proceedings 24 (2022) 102-108. https://doi.org/10.21741/9781644902059-16
[24] A. Bartkowska et al., Laser processing of diffusion boronized layer produced on monel® alloy 400 – microstructure, microhardness, corrosion and wear resistance tests, Materials 14 (2021) art. 7529. https://doi.org/10.3390/ma14247529
[25] A. Kalinowski et al., Laser surface texturing: characteristics and applications, System Safety: Human – Technical Facility – Environment 5 (2023) 240-248. https://doi.org/10.2478/czoto-2023-0026
[26] N. Radek et al., The influence of plasma cutting parameters on the geometric structure of cut surfaces, Mater. Res. Proc. 17 (2020) 132-137. https://doi.org/10.21741/9781644901038-20
[27] D. Nowakowski et al., Application of machine learning in the analysis of surface quality – the detection the surface layer damage of the vehicle body, METAL 2021 – 30th Int. Conf. Metall. Mater. (2021) 864-869. https://doi.org/10.37904/metal.2021.4210
[28] J. Pietraszek, A. Goroshko, The heuristic approach to the selection of experimental design, model and valid pre-processing transformation of DoE outcome, Advanced Materials Research 874 (2014) 145-149. https://doi.org/10.4028/www.scientific.net/AMR.874.145
[29] J. Pietraszek et al., Challenges for the DOE methodology related to the introduction of Industry 4.0, Prod. Eng. Arch. 26 (2020) 190-194. https://doi.org/10.30657/pea.2020.26.33
[30] M.S. Kozień, J. Wiciak, Passive structural acoustic control of the smart plate – FEM simulation, Acta Physica Polonica A 118 (2010) 1186-1188. https://doi.org/10.12693/APhysPolA.118.1186
[31] A. Goroshko et al., Multiphysics Modeling of Direct-Start Induction Motor Considering Rotor Unbalance, Materials Research Proceedings 45 (2024) 267-276. https://doi.org/10.21741/9781644903315-31
[32] A. Pacana, K. Czerwińska, Analysis of the causes of control panel inconsistencies in the gravitational casting process by means of quality management instruments, Production Engineering Archives 25 (2019) 12-16. https://doi.org/10.30657/pea.2019.25.03
[33] A. Pacana et al., Analysis of quality control efficiency in the automotive industry, Transportation Research Procedia 55 (2021) 691-698. https://doi.org/10.1016/j.trpro.2021.07.037
[34] D. Siwiec et al., Improving the non-destructive test by initiating the quality management techniques on an example of the turbine nozzle outlet, Materials Research Proceedings 17 (2020) 16-22. https://doi.org/10.21741/9781644901038-3
[35] J. Pietraszek, A. Gadek-Moszczak, The smooth bootstrap approach to the distribution of a shape in the ferritic stainless steel aisi 434l powders, Solid State Phenomena 197 (2013) 162-167. https://doi.org/10.4028/www.scientific.net/SSP.197.162
[36] J. Pietraszek, Fuzzy regression compared to classical experimental design in the case of flywheel assembly, Lecture Notes in Computer Science 7267 LNAI (2012) 310-317. https://doi.org/10.1007/978-3-642-29347-4_36
[37] J. Pietraszek, The modified sequential-binary approach for fuzzy operations on correlated assessments, Lecture Notes in Computer Science 7894 LNAI (2013) 353-364. https://doi.org/10.1007/978-3-642-38658-9_32
