Laser Micromachining of Stainless Steels Used in Military Applications
Artur KALINOWSKI, Krystian MULCZYK
Abstract. This study presents a systematic investigation into laser micromachining of stainless steel used in military applications. Using a single-mode fiber laser with controlled process parameters such as pulse repetition frequency, scanning speed, and F-theta lens focal length, the laser effect on surface microstructure was examined. Understanding the influence of key laser parameters enables optimized and reproducible processes, contributing to improved performance and lifespan of military hardware under extreme conditions.
Keywords
Laser Micromachining, High Energy Systems, Military Applications
Published online 1/25/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Artur KALINOWSKI, Krystian MULCZYK, Laser Micromachining of Stainless Steels Used in Military Applications, Materials Research Proceedings, Vol. 62, pp 26-33, 2026
DOI: https://doi.org/10.21741/9781644904015-4
The article was published as article 4 of the book Terotechnology XIV
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] A. Woźniak et al., The influence of laser texturing on the tribological behavior of titanium alloy Ti6Al4V in medical applications, Arch. Civ. Mech. Eng. 24 (2024) 1-19. https://doi.org/10.1007/S43452-024-00960-3
[2] A. Kalinowski et al., Selection of Process Parameters for Laser Texturing of DLC Coatings, Materials Research Proceedings 24 (2022) 46-51. https://doi.org/10.21741/9781644902059-8
[3] I. Etsion, Improving tribological performance of mechanical components by laser surface texturing, Tribology Letters 17 (2004) 733-737. https://doi.org/10.1007/S11249-004-8081-1
[4] E. Hegr et al., Evaluation of DLC coating for parts of weapons and military equipment, METAL 2020 – 29th Int. Conf. Metall. Mater., 1-10. https://doi.org/10.37904/metal.2020.3537
[5] Information on https://www.militaryaerospace.com/power/article/55140201/laser-weapons-high-power-microwaves-high-energy-weapons
[6] J. Kusiński, Lasery i ich zastosowanie w inżynierii materiałowej, Wydawnictwo Naukowe Akapit, Kraków, 2000.
[7] N. Radek, Determining the operational properties of steel beaters after electrospark deposition, Eksploatacja i Niezawodnosc 44 (2009) 10-16.
[8] A. Szczotok et al., Stereological characterization of γ′ phase precipitation in CMSX-6 monocrystalline nickel-base superalloy, Materials Characterization 60 (2009) 1114-1119. https://doi.org/10.1016/j.matchar.2009.01.023
[9] T. Lipiński, The structure and mechanical properties of Al-7%SiMg alloy treated with a homogeneous modifier, Solid State Phenomena 163 (2010) 183-186. https://doi.org/10.4028/www.scientific.net/SSP.163.183
[10] J.E. Takosoglu, P.A. Laski, Intelligent positioning system of electro-pneumatic servo-drive, Annals of DAAAM and Proc. International DAAAM Symposium (2011) 1641-1642.
[11] T. Lipiński, P. Szabracki, Modification of the hypo-eutectic Al-Si alloys with an exothermic modifier, Arch. Metall. Mater. 58 (2013) 453-458. https://doi.org/10.2478/amm-2013-0017
[12] J. Pietraszek, A. Gadek-Moszczak, The smooth bootstrap approach to the distribution of a shape in the ferritic stainless steel AISI 434L powders, Solid State Phenomena 197 (2013) 162-167. https://doi.org/10.4028/www.scientific.net/SSP.197.162
[13] K. Trzewiczek et al., Evaluation of the state for the material of the live steam superheater pipe coils of V degree, Advanced Materials Research 874 (2014) 35-42. https://doi.org/10.4028/www.scientific.net/AMR.874.35
[14] R. Ulewicz et al., Fatigue strength of ductile iron in ultra-high cycle regime, Advanced Materials Research 874 (2014) 43-48. https://doi.org/10.4028/www.scientific.net/AMR.874.43
[15] P. Szataniak et al., HSLA steels – Comparison of cutting techniques, METAL 2014 – 23rd Int. Conf. Metall. Mater. (2014) 778-783.
[16] J. Selejdak et al., The evaluation of the use of a device for producing metal elements applied in civil engineering, METAL 2014 – 23rd Int. Conf. Metall. Mater. (2014) 1882-1888.
[17] T. Lipiński, P. Szabracki, Mechanical properties of AlSi9Mg alloy with a sodium modifier, Solid State Phenomena 223 (2015) 78-86. https://doi.org/10.4028/www.scientific.net/SSP.223.78
[18] S. Michna et al., Research the causes of surface stains after eloxal coating for the profile from the AlMgSi alloy using substructural analysis, Manufacturing Technology 15 (2015) 620-624.
[19] A. Szczotok et al., Metallographic Study and Repeatability Analysis of γ’ Phase Precipitates in Cored, Thin-Walled Castings Made from IN713C Superalloy, Arch. Metall. Mater. 62 (2017) 595-601. https://doi.org/10.1515/amm-2017-0088
[20] I. Krzysztofik et al., Selected methods of control of the scanning and tracking gyroscope system mounted on a combat vehicle, Annual Reviews in Control 44 (2017) 173-182. https://doi.org/10.1016/j.arcontrol.2016.10.003
[21] R. Dwornicka, J. Pietraszek, The outline of the expert system for the design of experiment, Prod. Eng. Arch. 20 (2018) 43-48. https://doi.org/10.30657/pea.2018.20.09
[22] M. Krynke, R. Ulewicz, Analysis of the influence of slewing bearing mounting on their static load capacity, Transp. Res. Proc. 40 (2019) 745-750. https://doi.org/10.1016/j.trpro.2019.07.105
[23] J. Pietraszek et al., Challenges for the DOE methodology related to the introduction of Industry 4.0, Prod. Eng. Arch. 26 (2020) 190-194. https://doi.org/10.30657/pea.2020.26.33
[24] C. Karolina et al., Improvement of the production process with the use of selected KPIs, System Safety: Human – Technical Facility – Environment 2 (2020) 307-315. https://doi.org/10.2478/czoto-2020-0038
[25] S. Blasiak et al., Rapid prototyping of pneumatic directional control valves, Polymers 13 (2021) art. 1458. https://doi.org/10.3390/polym13091458
[26] E. Skrzypczak-Pietraszek, J. Pietraszek, Chemical profile and seasonal variation of phenolic acid content in bastard balm (Melittis melissophyllum L., Lamiaceae), Journal of Pharmaceutical and Biomedical Analysis 66 (2012) 154-161. https://doi.org/10.1016/j.jpba.2012.03.037
[27] M. Opydo et al., Characteristics of solids accumulation on steel samples during co-combustion of biomass and coal in a CFB boiler, Biomass and Bioenergy 120 (2019) 291-300. https://doi.org/10.1016/j.biombioe.2018.11.027
[28] T. Lipiński, D. Karpisz, Corrosion rate of 1.4152 stainless steel in a hot nitrate acid, METAL 2019 – 28th Int. Conf. Metall. Mater. (2019) 1086-1091.
[29] M. Zenkiewicz et al., Electrostatic separation of binary mixtures of some biodegradable polymers and poly(vinyl chloride) or poly(ethylene terephthalate), Polimery/Polymers 61 (2016) 835-843. https://doi.org/10.14314/polimery.2016.835
[30] A. Pacana et al., Influence of natural aggregate crushing process on crushing strength index, Sustainability (Switzerland) 13 (2021) art. 8353. https://doi.org/10.3390/su13158353
[31] J.M. Djoković et al., Selection of the Optimal Window Type and Orientation for the Two Cities in Serbia and One in Slovakia, Energies 15 (2022) art. 323. https://doi.org/10.3390/en15010323
[32] J. Lorkowski et al., Effects of breast and prostate cancer metastases on lumbar spine biomechanics: Rapid in silico evaluation, Advances in Experimental Medicine and Biology 1096 (2018) 31-39. https://doi.org/10.1007/5584_2018_192
[33] D.S. Pietrala, P.A. Laski, Design and Control of a Pneumatic Muscle Servo Drive Containing Its Own Pneumatic Muscles, Applied Sciences 12 (2022) art. 11024. https://doi.org/10.3390/app122111024
[34] J. Pietraszek, Fuzzy regression compared to classical experimental design in the case of flywheel assembly, Lecture Notes in Computer Science 7267 LNAI (2012) 310-317. https://doi.org/10.1007/978-3-642-29347-4_36
[35] J. Pietraszek, The modified sequential-binary approach for fuzzy operations on correlated assessments, Lecture Notes in Computer Science 7894 LNAI (2013) 353-364. https://doi.org/10.1007/978-3-642-38658-9_32
