The Role of Laser Technology in Military Defense Systems – An Overview
Artur KALINOWSKI
Abstract. This article presents the role of laser technology in modern military defense systems, with particular emphasis on its applications as direct energy weapons. The current uses of lasers in targeting, rangefinding, and communication are discussed alongside the prospects for deploying laser systems capable of neutralizing targets such as drones and missiles. The paper analyzes key technological challenges, including power management, thermal regulation, and the impact of atmospheric conditions on laser effectiveness. It also outlines applications of lasers in LiDAR, target designation, dazzling systems, and auxiliary operations such as cutting, welding, and repairs. The further development of advanced materials and optical solutions will be crucial for the successful integration of laser weapons into dynamic combat scenarios of the 21st century.
Keywords
Laser Technology, High-Energy Systems, Military Defense Systems
Published online 1/25/2026, 8 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Artur KALINOWSKI, The Role of Laser Technology in Military Defense Systems – An Overview, Materials Research Proceedings, Vol. 62, pp 203-210, 2026
DOI: https://doi.org/10.21741/9781644904015-26
The article was published as article 26 of the book Terotechnology XIV
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Information on: https://www.defenseadvancement.com/suppliers/military-lidar
[2] Information on: https://www.baesystems.com/en/product/geiger-mode-lidar-camera
[3] Information on https://www.transparencymarketresearch.com/europe-military-free-space-optics-communication-market.html
[4] Information on https://www.militaryaerospace.com/power/article/55140201/laser-weapons-high-power-microwaves-high-energy-weapons
[5] O. Steinvall, Laser dazzling: an overview, Technologies for Optical Countermeasures XIX, 12738 (2023) 1-6. https://doi.org/10.1117/12.2678416
[6] Information on https://www.armyrecognition.com/news/navy-news/2025/us-navy-launches-songbow-laser-weapon-project-to-counter-drones-without-running-out-of-missiles
[7] Information on https://www.gov.uk/government/news/advanced-future-military-laser-achieves-uk-first
[8] Information on https://turdef.com/article/tuebitak-bilgem-s-isik-laser-weapon-passes-acceptance-tests
[9] A. Szczotok et al., Stereological characterization of γ’ phase precipitation in CMSX-6 monocrystalline nickel-base superalloy, Materials Characterization 60 (2009) 1114-1119. https://doi.org/10.1016/j.matchar.2009.01.023
[10] D. Klimecka-Tatar et al., The kinetics of Ti-1Al-1Mn alloy thermal oxidation and charcteristic of oxide layer, Archives of Metallurgy and Materials 60 (2015) 735-738. https://doi.org/10.1515/amm-2015-0199
[11] K. Jagielska-Wiaderek et al., Corrosion resistance depth profiles of nitrided layers on austenitic stainless steel produced at elevated temperatures, Archives of Metallurgy and Materials 54 (2009) 115-120.
[12] J.E. Takosoglu, P.A. Laski, Intelligent positioning system of electro-pneumatic servo-drive, Annals of DAAAM and Proc. International DAAAM Symposium (2011) 1641-1642.
[13] I. Krzysztofik et al., Selected methods of control of the scanning and tracking gyroscope system mounted on a combat vehicle, Annual Reviews in Control 44 (2017) 173-182. https://doi.org/10.1016/j.arcontrol.2016.10.003
[14] A. Dudek, C. Kolan, Assessments of shrinkage degree in bioceramic sinters HA+ZrO2, Solid State Phenomena 165 (2010) 25-30. https://doi.org/10.4028/www.scientific.net/SSP.165.25
[15] A. Dudek, Microstructure and properties of the composites: Hydroxyapatite with addition of zirconia phase, Journal of Engineering Materials and Technology 133 (2011) art. 021006. https://doi.org/10.1115/1.4003104
[16] J. Pietraszek et al., Modeling of errors counting system for PCB soldered in the wave soldering technology, Advanced Materials Research 874 (2014) 139-143. https://doi.org/10.4028/www.scientific.net/AMR.874.139
[17] P. Szataniak et al., HSLA steels – Comparison of cutting techniques, METAL 2014 – 23rd Int. Conf. Metall. Mater. (2014) 778-783.
[18] J. Pietraszek et al., Challenges for the DOE methodology related to the introduction of Industry 4.0, Prod. Eng. Arch. 26 (2020) 190-194. https://doi.org/10.30657/pea.2020.26.33
[19] S. Borkowski et al., The use of 3×3 matrix to evaluation of ribbed wire manufacturing technology, METAL 2012 – 21st Int. Conf. Metall. Mater., (2012) 1722-1728.
[20] J. Pietraszek, Fuzzy regression compared to classical experimental design in the case of flywheel assembly, Lecture Notes in Computer Science 7267 LNAI (2012) 310-317. https://doi.org/10.1007/978-3-642-29347-4_36
[21] J. Pietraszek, The modified sequential-binary approach for fuzzy operations on correlated assessments, Lecture Notes in Computer Science 7894 LNAI (2013) 353-364. https://doi.org/10.1007/978-3-642-38658-9_32
[22] R. Dwornicka, J. Pietraszek, The outline of the expert system for the design of experiment, Prod. Eng. Arch. 20 (2018) 43-48. https://doi.org/10.30657/pea.2018.20.09
[23] J. Pietraszek et al., The estimation of accuracy for the neural network approximation in the case of sintered metal properties, Studies in Computational Intelligence 513 (2014) 125-134. https://doi.org/10.1007/978-3-319-01787-7_12
[24] J. Pietraszek et al., The parametric RSM model with higher order terms for the meat tumbler machine process, Solid State Phenomena 235 (2015) 37-44. https://doi.org/10.4028/www.scientific.net/SSP.235.37
[25] J. Pietraszek, A. Goroshko, The heuristic approach to the selection of experimental design, model and valid pre-processing transformation of DoE outcome, Advanced Materials Research 874 (2014) 145-149. https://doi.org/10.4028/www.scientific.net/AMR.874.145
[26] P.J. Romanowicz et al., Using the Effect of Compression Stress in Fatigue Analysis of the Roller Bearing for Bimodal Stress Histories, Materials 15 (2022) art. 196. https://doi.org/10.3390/ma15010196
[27] J. Pietraszek, E. Skrzypczak-Pietraszek, The uncertainty and robustness of the principal component analysis as a tool for the dimensionality reduction, Solid State Phenomena 235 (2015) 1-8. https://doi.org/10.4028/www.scientific.net/SSP.235.1
[28] J. Pietraszek, A. Gadek-Moszczak, The smooth bootstrap approach to the distribution of a shape in the ferritic stainless steel AISI 434L powders, Solid State Phenomena 197 (2013) 162-167. https://doi.org/10.4028/www.scientific.net/SSP.197.162
[29] E. Skrzypczak-Pietraszek, J. Pietraszek, Chemical profile and seasonal variation of phenolic acid content in bastard balm (Melittis melissophyllum L., Lamiaceae), Journal of Pharmaceutical and Biomedical Analysis 66 (2012) 154-161. https://doi.org/10.1016/j.jpba.2012.03.037
[30] A. Dudek et al., Effect of corrosion protection method on properties of RSW and RFSSW lap joints applied in production of thin-walled aerostructures, Materials 13 (2020) art. 1841. https://doi.org/10.3390/MA13081841
[31] J.M. Djoković et al., Selection of the Optimal Window Type and Orientation for the Two Cities in Serbia and One in Slovakia, Energies 15 (2022) art. 323. https://doi.org/10.3390/en15010323
[32] M. Zenkiewicz et al., Electrostatic separation of binary mixtures of some biodegradable polymers and poly(vinyl chloride) or poly(ethylene terephthalate), Polimery/Polymers 61 (2016) 835-843. https://doi.org/10.14314/polimery.2016.835
[33] P. Krysiak et al., The design and field tests of a box for “ERG” electric blasting caps, Lect. Note Mech. Eng. (2017) 285-292. https://doi.org/10.1007/978-3-319-50938-9_29
[34] E. Lisowski, G. Filo, Automated heavy load lifting and moving system using pneumatic cushions, Autom. Constr. 50 (2015) 91-101. https://doi.org/10.1016/j.autcon.2014.12.004
[35] R. Dwornicka et al., The smoothed bootstrap fine-tuning, System Safety: Human – Technical Facility – Environment 1 (2019) 716-723. https://doi.org/10.2478/czoto-2019-0091
