Economic and Legal Perspective of Safe and Secure E Commerce Development
Ewa KOZIEŃ, Adam KOZIEŃ
Abstract. Currently, the e-commerce industry is one of the fastest-growing branches of trade. Even the Ukrainian army utilizes e-commerce in logistic gamification, where armament supplies are granted according to the number of enemies killed. Enterprises that develop their own e-commerce models aim to enhance their economic potential. New trends in e-commerce have a significant impact on the dynamics of online product and service sales, as well as on strengthening their competitive position. Improving a sales process, aiming to attract the largest possible number of clients, involves leveraging key e-commerce trends such as omnichannel, personalization, m-commerce, social selling, and content marketing informed by Big Data. The dynamics of e-commerce development also pertain to legal regulations, including norms of common international law, EU law, and national law. The objective of this paper is to indicate economic and legal conditions from the perspective of e-commerce development.
Keywords
Development, E-Commerce, Economy, Law, Safe, Secure
Published online 1/25/2026, 7 pages
Copyright © 2026 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Ewa KOZIEŃ, Adam KOZIEŃ, Economic and Legal Perspective of Safe and Secure E Commerce Development, Materials Research Proceedings, Vol. 62, pp 11-17, 2026
DOI: https://doi.org/10.21741/9781644904015-2
The article was published as article 2 of the book Terotechnology XIV
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Ph. Kotler, G. Amstrong, J. Saunders, V. Wong, Principles of Marketing: 3rd European Edition, Pitman Publishing, 2001.
[2] M. Bacchetta, P. Low, A. Mattoo, L. Schuknecht, H. Wagerand, M. Wehrens, Special Studies – Electronic Commerce and the role of the WTO, WTO Publications, Geneva, 1998.
[3] E-commerce w Polsce, Raport Gemius, Izba Gospodarki Elektronicznej, 2025.
[4] W.M. Grudzewski, I. Hejduk, Przedsiębiorstwo wirtualne, Difin, Warszawa, 2002.
[5] D. Tapscott, Grown Up Digital: How the Net Generation is Changing Your World, McGraw Hill, 2008.
[6] U. Varshney, A. Mallow, R. Jain, P. Ahluwalia, Wireless in the Enterprise: Requirements and Possible Solutions, Proceedings of the Workshop on Wireless Strategy in the Enterprise: An International Research Perspective, University of California-Berkeley, Berkeley, 2002.
[7] UNCITRAL Model Law on Electronic Commerce with Guide to Enactment 1996 with additional article 5 bis as adopted in 1998. https://www.uncitral.org/pdf/english/texts/electcom/05-89450_Ebook.pdf.
[8] Directive 2000/31/EC of the European Parliament and of the Council of 8 June 2000 on certain legal aspects of information society services, in particular electronic commerce, in the Internal Market (Directive on electronic commerce), OJ L 178, 17.7.2000.
[9] Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation) (Text with EEA relevance), OJ L119, 4.5.2016.
[10] P. Ruczkowski, 2020, [in:] Zdyb, M., Stelmasiak, J. (Eds.), 2016. Prawo administracyjne. Wolters Kluwer, Warszawa.
[11] J. Barcz, M. Górka, A. Wyrozumska, Instytucje i prawo Unii Europejskiej, Wolters Kluwer, Warszawa, 2023.
[12] C. Banasiński, 2015, [in:] H. Gronkiewicz-Waltz, M. Wierzbowski, (Eds.), Prawo gospodarcze. Zagadnienia administracyjnoprawne. Wolters Kluwer, Warszawa, 2015.
[13] M. Michalski et al., The Influence of Operational Exposure on Changes in Parameters of Effective Camouflage of Coatings Used in Military Technology, Advances in Science and Technology Research Journal 17 (2023) 182-196. https://doi.org/10.12913/22998624/156940
[14] W. Przybył et al., Microwave absorption properties of carbonyl iron-based paint coatings for military applications, Defence Technology 22 (2023) 1-9. https://doi.org/10.1016/j.dt.2022.06.013
[15] Ł.J. Orman et al., Comparative Analysis of Indoor Environmental Quality and Self-Reported Productivity in Intelligent and Traditional Buildings, Energies 16 (2023) art. 6663. https://doi.org/10.3390/en16186663
[16] A. Pacana et al., Analysis of a practical approach to the concept of sustainable development in a manufacturing company in the automotive sector, Waste Forum (2020) 151-161.
[17] R. Ulewicz, Quality management system operation in the woodworking industry, The Path Forward for Wood Products: A Global Perspective – Proceedings of Scientific Papers (2016) 51-56.
[18] R. Ulewicz, F. Novy and R. Dwornicka, Quality and work safety in metal foundry, METAL 2020 – 29th Int. Conf. Metall. Mater. (2020) 1287-1293. https://doi.org/10.37904/metal.2020.3649
[19] R. Ulewicz, D. Siwiec and A. Pacana, Sustainable Vehicle Design Considering Quality Level and Life Cycle Environmental Assessment (LCA), Energies 16 (2023) art. 8122. https://doi.org/10.3390/en16248122
[20] O. Gumen et al., Research of thermal processes in industrial premises with energy-saving technologies of heating, Diagnostyka 18 (2017) 43-49.
[21] S. Maleczek et al., Tests of Acid Batteries for Hybrid Energy Storage and Buffering System—A Technical Approach, Energies 15 (2022) art. 3514. https://doi.org/10.3390/en15103514
[22] M. Ingaldi, S. Jursová, Economy and possibilities of waste utilization in Poland, METAL 2013 – 22nd Int. Conf. Metall. Mater. (2013) 1779-1784.
[23] S. Brožová, M. Ingaldi and I. Šperlín, Economical aspects of high-temperature heating utilization for industrial waste treatment, METAL 2013 – 22nd Int. Conf. Metall. Mater. (2013) 1735-1739.
[24] A. Pietrzak, M. Ulewicz, Influence of Post-Consumer Waste Thermoplastic Elastomers Obtained from Used Car Floor Mats on Concrete Properties, Materials 16 (2023) art. 2231. https://doi.org/10.3390/ma16062231
[25] E. Radzyminska-Lenarcik, R. Ulewicz and M. Ulewicz, Zinc recovery from model and waste solutions using polymer inclusion membranes (PIMs) with 1-octyl-4-methylimidazole, Desalination and Water Treatment 102 (2018) 211-219. https://doi.org/10.5004/dwt.2018.21826
[26] A. Pacana, D. Siwiec and R. Dwornicka, Method Supporting Improving Products in Terms of Qualitative-Environmental, Materials Research Proceedings 34 (2023) 226-236. https://doi.org/10.21741/9781644902691-27
[27] A. Pacana, D. Siwiec, Method of Fuzzy Analysis of Qualitative-Environmental Threat in Improving Products and Processes (Fuzzy QE-FMEA), Materials 16 (2023) art. 1651. https://doi.org/10.3390/ma16041651
[28] D. Siwiec, A. Pacana and A. Gazda, A New QFD-CE Method for Considering the Concept of Sustainable Development and Circular Economy, Energies 16 (2023) art. 2474. https://doi.org/10.3390/en16052474
[29] A. Pacana, D. Siwiec and R. Dwornicka, Pro-quality method improving industrial products toward sustainable development with criteria of circular economy, METAL 2024 – Int. Conf. Metall. Mater. 2023-May (2024) 697-702. https://doi.org/10.37904/metal.2023.4743
[30] B. Gajdzik et al., Approaching open innovation in customization frameworks for product prototypes with emphasis on quality and life cycle assessment (QLCA), Journal of Open Innovation: Technology, Market, and Complexity 10 (2024) art. 100268. https://doi.org/10.1016/j.joitmc.2024.100268
[31] E. Skrzypczak-Pietraszek, J. Pietraszek, Chemical profile and seasonal variation of phenolic acid content in bastard balm (Melittis melissophyllum L., Lamiaceae), Journal of Pharmaceutical and Biomedical Analysis 66 (2012) 154-161. https://doi.org/10.1016/j.jpba.2012.03.037
[32] E. Skrzypczak-Pietraszek, A.G. Pietraszek, Phytoremediation and Allelopathy as an Element of Sustainable Circular Economy to Prevent Environmental Pollution, Materials Research Proceedings 45 (2024) 140-145. https://doi.org/10.21741/9781644903315-17
[33] T. Lipiński, J. Pietraszek, Corrosion of the S235JR Carbon Steel after Normalizing and Overheating Annealing in 2.5% Sulphuric Acid at Room Temperature, Materials Research Proceedings 24 (2022) 102-108. https://doi.org/10.21741/9781644902059-16
[34] N. Radek et al., Formation of coatings with technologies using concentrated energy stream, Production Engineering Archives 28 (2022) 117-122. https://doi.org/10.30657/pea.2022.28.13
[35] N. Radek et al., Operational properties of DLC coatings and their potential application, METAL 2022 – 31st Int. Conf. Metall. Mater., (2022), Ostrava, Tanger, 531-536. https://doi.org/10.37904/metal.2022.4491
[36] A. Kalinowski et al., Laser surface texturing: characteristics and applications, System Safety: Human-Technical Facility-Environment 5 (2023) 240-248. https://doi.org/10.2478/czoto-2023-0026
[37] M. Ulewicz, A. Pietrzak, Properties and structure of concretes doped with production waste of thermoplastic elastomers from the production of car floor mats, Materials 14 (2021) art. 872. https://doi.org/10.3390/ma14040872
[38] J. Pietraszek, A. Goroshko, The heuristic approach to the selection of experimental design, model and valid pre-processing transformation of DoE outcome, Advanced Materials Research 874 (2014) 145-149. https://doi.org/10.4028/www.scientific.net/AMR.874.145
[39] J. Pietraszek, N. Radek and A.V. Goroshko, Challenges for the DOE methodology related to the introduction of Industry 4.0, Production Engineering Archives 26 (2020) 190-194. https://doi.org/10.30657/pea.2020.26.33
[40] J. Pietraszek, A. Gadek-Moszczak, The smooth bootstrap approach to the distribution of a shape in the ferritic stainless steel AISI 434l powders, Solid State Phenomena 197 (2013) 162-167. https://doi.org/10.4028/www.scientific.net/SSP.197.162
[41] J. Pietraszek, Fuzzy regression compared to classical experimental design in the case of flywheel assembly, 7267 LNAI (2012) 310-317. https://doi.org/10.1007/978-3-642-29347-4_36
[42] J. Pietraszek, The modified sequential-binary approach for fuzzy operations on correlated assessments, Lecture Notes in Computer Science 7894 LNAI (2013) 353-364. https://doi.org/10.1007/978-3-642-38658-9_32
[43] R. Dwornicka, J. Pietraszek, The outline of the expert system for the design of experiment, Production Engineering Archives 20 (2018) 43-48. https://doi.org/10.30657/pea.2018.20.09
