Materials for High Temperature: A General Concept
Adarsh Kumar Arya, Ashish Kapoor, Devanshi Srivastava, Murali Pujari
High-temperature materials play a crucial role in advancing sustainable engineering, which seeks to reduce environmental impact and enhance resource efficiency. The effective use of such materials, including ceramics, polymers, and metals, enables advancements in several commercial applications. This work explores the selection criteria for these materials, highlights their distinctive properties, and discusses their diverse applications. Furthermore, it reviews essential characterization techniques used to analyze their material properties.
Keywords
High-Temperature Materials, Characterization, Applications, Sustainable Engineering
Published online 9/10/2025, 20 pages
Citation: Adarsh Kumar Arya, Ashish Kapoor, Devanshi Srivastava, Murali Pujari, Materials for High Temperature: A General Concept, Materials Research Foundations, Vol. 178, pp 259-278, 2025
DOI: https://doi.org/10.21741/9781644903698-13
Part of the book on Superalloys
References
[1] F. Findik, High-temperature materials processing, High Temp. Mater. Mech. (2014) 179–208. https://doi.org/10.1201/b16545-10
[2] C. Wang, L. Bai, H. Xu, S. Qin, Y. Li, G. Zhang, A review of high-temperature aerogels: composition, mechanisms, and properties, Gels. 10 (2024) 286. https://doi.org/10.3390/gels10050286
[3] P.O. Maruschak, S.V. Panin, S.R. Ignatovich, I.M. Zakiev, I.V. Konovalenko, I.V. Lytvynenko, V.P. Sergeev, Influence of deformation process in material at multiple cracking and fragmentation of nanocoating, Theor. Appl. Fract. Mech. 57 (2012) 43–48. https://doi.org/10.1016/j.tafmec.2011.12.007
[4] G.W. Meetham, M.H. Van de Voorde, Materials for high temperature engineering applications, Eng. Mater. (2000). https://doi.org/10.1007/978-3-642-56938-8
[5] K. Spear, E. Wuchina, E.D. Wachsman, High temperature materials, Electrochem. Soc. Interface. 15 (2006) 48–51. https://doi.org/10.1149/2.f14061if
[6] S.V. Raj, Comparison of the isothermal oxidation behavior of As-cast Cu–17% Cr and Cu–17% Cr–5% Al psart I: Oxidation kinetics, Oxid. Met. 70 (2008) 85–102. https://doi.org/10.1007/s11085-008-9110-5
[7] V. Trush, P. Maruschak, M. Student, S. Lavrys, A. Luk’yanenko, Effect of heat treatment in oxygen-containing medium on fatigue life of zirconium alloy, strojnícky casopis – J. Mech. Eng. 72 (2022) 211–218. https://doi.org/10.2478/scjme-2022-0030
[8] S. Marenovic, M. Dimitrijevic, T.V. Husovic, B. Matovic, Thermal shock damage characterization of refractory composites, Ceram. Int. 34 (2008) 1925–1929. https://doi.org/10.1016/j.ceramint.2007.07.021
[9] M.M. Vuksanović, M. Gajić-Kvaščev, M. Dojčinović, T.V. Husović, R.J. Heinemann, New surface characterization tools for alumina based refractory material exposed to cavitation – Image analysis and pattern recognition approach, Mater. Charact. 144 (2018) 113–119. https://doi.org/10.1016/j.matchar.2018.07.003
[10] M. Dimitrijevic, M. Posarac, J. Majstorovic, T. Volkov-Husovic, B. Matovic, Behavior of silicon carbide/cordierite composite material after cyclic thermal shock, Ceram. Int. 35 (2009) 1077–1081. https://doi.org/10.1016/j.ceramint.2008.04.029
[11] B. Matović, D. Bučevac, V. Urbanović, N. Stanković, N. Daneu, T. Volkov-Husović, B. Babic, Monolithic nanocrystalline SiC ceramics, J. Eur. Ceram. Soc. 36 (2016) 3005–3010. https://doi.org/10.1016/j.jeurceramsoc.2015.10.031
[12] M.M. Vlahović, P.B. Jovanić, S.P. Martinović, T.Đ. Boljanac, T.D. Volkov-Husović, Quantitative evaluation of sulfur–polymer matrix composite quality, Compos. Part B Eng. 44 (2013) 458–466. https://doi.org/10.1016/j.compositesb.2012.04.005
[13] M.M. Vlahović, M.M. Savić, S.P. Martinović, T.Đ. Boljanac, T.D. Volkov-Husović, Use of image analysis for durability testing of sulfur concrete and Portland cement concrete, Mater. Des. 34 (2012) 346–354. https://doi.org/10.1016/j.matdes.2011.08.026
[14] I.S. Ignjatović, S.B. Marinković, Z.M. Mišković, A.R. Savić, Flexural behavior of reinforced recycled aggregate concrete beams under short-term loading, Mater. Struct. 46 (2012) 1045–1059. https://doi.org/10.1617/s11527-012-9952-9
[15] D. Jevtic, D. Zakic, A. Savic, Investigation of cement based composites made with recycled rubber aggregate, Hem. Ind. 66 (2012) 609–617. https://doi.org/10.2298/hemind111203010j
[16] R.A. Shenoi, J.M. Dulieu-Barton, S. Quinn, J.I.R. Blake, S.W. Boyd, Composite materials for marine applications: Key challenges for the future, Compos. Mater. (2011) 69–89. https://doi.org/10.1007/978-0-85729-166-0_3
[17] S. Martinovic, M. Vlahovic, T. Boljanac, M. Dojcinovic, T. Volkov-Husovic, Cavitation resistance of refractory concrete: Influence of sintering temperature, J. Eur. Ceram. Soc. 33 (2013) 7–14. https://doi.org/10.1016/j.jeurceramsoc.2012.08.004
[18] D. Pacilè, C. Cardoso, G. Avvisati, I. Vobornik, C. Mariani, D.A. Leon, P. Bonfà, D. Varsano, A. Ferretti, M.G. Betti, Narrowing of d bands of FeCo layers intercalated under graphene, Appl. Phys. Lett. 118 (2021). https://doi.org/10.1063/5.0047266
