Mechanical performance of glass fiber epoxy laminates with embedded circular and square cutouts
Aravind MUDDEBIHAL, P.S. Shivakumar Gouda, Vinayak S. UPPIN, I. Sridhar
Abstract. This study explores the influence of induced embedded cutouts of circular and square shapes on tensile and buckling performance of glass fiber reinforced polymer (GFRP) composite laminates. Cutouts are often introduced in composite structures during manufacturing for functional requirements such as fastening, wiring, or integration with other components. But their presence creates a localized stress concentration that can significantly affect mechanical performance and failure behavior. Specimens with embedded circular, square shaped cutouts, and plain GFRP composite laminates were manufactured and tested under tensile and buckling load conditions to assess the extent of strength reduction. The results demonstrate that embedded circular holes cause a decrease in their tensile and buckling strengths up to 51% compared to plain laminates, as their geometry facilitates uniform stress distribution and reduces the likelihood of premature failure. In contrast, square cutouts lead to a more pronounced reduction up to 55% in both tensile and buckling strength, this was primarily due to the sharp corners serving as stress risers hence initiating damage and propagate the cracks. This study provides detailed insights into the behavior of GFRP laminates with embedded features and highlights the importance of optimizing the design for placement of cutouts through experimental and finite element analysis to balance functional requirements with mechanical reliability in engineering applications.
Keywords
Embedded Cutouts, Composite Laminates, Tensile, Buckling and FE Analysis
Published online 6/1/2025, 6 pages
Copyright © 2025 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Aravind MUDDEBIHAL, P.S. Shivakumar Gouda, Vinayak S. UPPIN, I. Sridhar, Mechanical performance of glass fiber epoxy laminates with embedded circular and square cutouts, Materials Research Proceedings, Vol. 55, pp 45-50, 2025
DOI: https://doi.org/10.21741/9781644903612-8
The article was published as article 8 of the book Materials Joining and Manufacturing Processes
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] S. D. Watsar, A. Bharule, Stress analysis of finite plate with special shaped cutout, International J. Sci. Engg. and Research, 3.4 (2015) 145-150. https://www.doi.org/10.70729/IJSER15116
[2] A. Lal, B. M. Sutaria, Rahul Kumar, Stress analysis of composite plate with cutout of various shape, IOP Conference Series: Materials Science and Engineering 814 (2020) 012011. 10.1088/1757-899X/814/1/012011
[3] J. Woo, W.B. Na, Effect of cutout orientation on stress concentration of perforated plates with various cutouts and bluntness, Intl. J. Ocean System Engg., 1.2 (2011) 95-101. https://doi.org/10.5574/IJOSE.2011.1.2.095
[4] J. Rezaeepazhand, M. Jafari, Stress analysis of perforated composite plates, J. Composite Structures, 71 (2005) 463-468. https://doi.org/10.1016/j.compstruct.2005.09.017
[5] Z. Pan, Y Cheng, J. Liu, Stress analysis of a finite plate with a rectangular hole subjected to uniaxial tension using modified stress functions, Intl. J. of Mechanical Sci., 75 (2013) 265-277. https://doi.org/10.1016/j.ijmecsci.2013.06.014
[6] M. Bulut, Effectiveness of double cutout on lateral buckling analysis of fiber reinforced composites, J. Polymer Composites, 45 (2024) 10880-10887. https://doi.org/10.1002/pc.28515
[7] S. A. Kumar, R. Rajesh, S. Pugazhendhi, A review of stress concentration studies on fibre composite panels with holes/cutouts, Proceedings of the Institution of Mechanical Engineers, Part L: J. Materials: Design and Applications, 234.11 (2020) 1461-1472. https://doi.org/10.1177/1464420720944571
[8] S. Gupta, S. Pal, B. C. Ray, An overview of mechanical properties and failure mechanism of FRP laminates with hole/cutout, J. Applied Polymer Sci., 140.20 (2023) e53862. https://doi.org/10.1002/app.53862
[9] ASTM D3039, Test method for tensile properties of polymer matrix composite materials, ASTM International, West Conshohocken, PA, USA (2014).
[10] ASTM E2954-15, Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members, 2022.
[11] M.J.M. Fikry, S. Ogihara, V. Vinogradov, The effect of matrix cracking on mechanical properties in FRP laminates, J.Mechanics of Advanced Materials and Modern Processes, 4 (2018) 1-16. https://doi.org/10.1186/s40759-018-0036-6
[12] I.M. Alarifi, Investigation into the structural, chemical and high mechanical reforms in B4C with graphene composite material substitution for potential shielding frame applications, J.Molecules, 26 (2021) 1921. https://doi.org/10.3390/molecules26071921.
