Evaluation of the environmental impact of direct hot rolling, ECAP and FSE for aluminum chips recycling
Mauro CARTA, Pasquale BUONADONNA, Rayane El MOHTADI, Daniele LAI, Mohamad EL MEHTEDI
Abstract. With the increasing global demand for aluminum, the environmental challenges associated with primary aluminum production, such as high energy consumption and greenhouse gas emissions, need innovative recycling solutions. Recently, unconventional aluminum recycling methods, known as Solid-State Recycling (SSR), have been developed. These processes bypass the melting stage, resulting in significant energy savings and reduced material losses. This paper presents a Life Cycle Assessment (LCA) study of the newly developed Direct Hot Rolling (DHR) process for recycling aluminum chips, focusing on the environmental impacts of chips degreasing and comparing DHR with other SSR methods. The DHR process, an emerging solid-state recycling (SSR) technology, offers a promising alternative to conventional methods by reducing energy use and emissions. However, the introduction of a degreasing phase is necessary to possibly scale the process for industrial applications, adding new environmental considerations. Using the SimaPro software with a “gate to gate” approach, this study evaluates the environmental performance of DHR both with and without the degreasing phase, to understand the environmental impact of this step. Then, based on data available in literature, the direct rolling process is compared with ECAP and FSE techniques. The results show that the degreasing process significantly contributes to aquatic and terrestrial ecotoxicity due to the chemicals used, highlighting a trade-off between material quality and environmental liability. On the other hand, DHR has a lower overall environmental impact if compared to ECAP and FSE. Additionally, DHR demonstrates significantly lower material losses compared to ECAP and FSE, making it more resource efficient.
Keywords
Life Cycle Assessment, Solid State Recycling, Direct Rolling, ECAP, FSE, Aluminum
Published online 5/7/2025, 10 pages
Copyright © 2025 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Mauro CARTA, Pasquale BUONADONNA, Rayane El MOHTADI, Daniele LAI, Mohamad EL MEHTEDI, Evaluation of the environmental impact of direct hot rolling, ECAP and FSE for aluminum chips recycling, Materials Research Proceedings, Vol. 54, pp 2556-2565, 2025
DOI: https://doi.org/10.21741/9781644903599-276
The article was published as article 276 of the book Material Forming
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] J. R. Davis & Associates, Aluminum and aluminum alloys, (1993) ASM specialty handbook; ASM International: Materials Park, OH, 1993; ISBN 978-0-87170-496-2
[2] D. Paraskevas, K. Kellens, A. Van de Voorde, W. Dewulf, J.R. Duflou, Environmental Impact Analysis of Primary Aluminium Production at Country Level, Procedia CIRP 40 (2016) 209-213 https://doi.org/10.1016/j.procir.2016.01.104
[3] T.G. Gutowski, S. Sahni, J.M. Allwood, M.F. Ashby, E. Worrell, The energy required to produce materials: constraints on energy-intensity improvements, parameters of demand, 371 (2013) 20120003 https://doi.org/10.1098/rsta.2012.0003
[4] S. Al-Alimi, N.K. Yusuf, A.M. Ghaleb, M.A. Lajis, S. Shamsudin, W. Zhou, Y.M. Altharan, H.S. Abdulwahab, Y. Saif, D.H. Didane, I. S t t, A. Adam, Recycling aluminium for sustainable development: A review of different processing technologies in green manufacturing, Results in Engineering 23 (2024) 102566 https://doi.org/10.1016/j.rineng.2024.102566
[5] D. Raabe, D. Ponge, P.J. Uggowitzer, M. Roscher, M. Paolantonio, C. Liu, H. Antrekowitsch, E. Kozeschnik, D. Seidmann, B. Gault, F. De Geuser, A. Deschamps, C. Hutchinson, C. Liu, Z. Li, P. Prangnell, J. Robson, P. Shanthraj, S. Vakili, C. Sinclair, L. Bourgeois, S. Pogatscher, Making sustainable aluminum by recycling scrap: The science of “dirty” alloys, Progress in Materials Science 128 (2022) 100947 https://doi.org/10.1016/j.pmatsci.2022.100947
[6] A. Astarita, M. De Luca, C. Sinagra, Impact of rolling processes in the production of aluminum packaging assessed through LCA, Int J Life Cycle Assess 28 (2023) 1756-1772 https://doi.org/10.1007/s11367-023-02220-7
[7] L. Hendriok, M. Nienaber, G. Kurz, N. Ben Khalifa, Die geometry influence on the texture and microstructure development during extrusion of AZ31 and ZK60 magnesium alloy chips, Materials & Design 249 (2025) 113545 https://doi.org/10.1016/j.matdes.2024.113545
[8] M. Haase, N. Ben Khalifa, A.E. Tekkaya, W.Z. Misiolek, Improving mechanical properties of chip-based aluminum extrudates by integrated extrusion and equal channel angular pressing (iECAP), Materials Science and Engineering: A 539 (2012) 194-204 https://doi.org/10.1016/j.msea.2012.01.081
[9] J. Krolo, B. Lela, I. Dumanić, F. Kozina, Statistical Analysis of the Combined ECAP and Heat Treatment for Recycling Aluminum Chips Without Remelting, Metals 9 (2019) 660 https://doi.org/10.3390/met9060660
[10] G. Ingarao, D. Baffari, E. Bracquene, L. Fratini, J. Duflou, Energy Demand Reduction Of Aluminum Alloys Recycling Through Friction Stir Extrusion Processes Implementation, Procedia Manufacturing 33 (2019) 632-638 https://doi.org/10.1016/j.promfg.2019.04.079
[11] M. Carta, P. Buonadonna, M. El Mehtedi, Numerical Analysis of Process Parameters and Tool Geometry in Friction Stir Back Extrusion of Pure Aluminum, Procedia CIRP 126 (2024) 710-714 https://doi.org/10.1016/j.procir.2024.08.294
[12] M. El Mehtedi, P. Buonadonna, R. El Mohtadi, G. Loi, F. Aymerich, N. Ben Khalifa, M. Carta, Feasibility Study of Solid-State Recycling through Direct Hot Rolling of AA5754 Aluminum Chips for Automotive Applications, MSF 1130 (2024) 3-12 https://doi.org/10.4028/p-J0bRTh
[13] D. Paraskevas, K. Vanmeensel, J. Vleugels, W. Dewulf, Y. Deng, J. Duflou, Spark Plasma Sintering As a Solid-State Recycling Technique: The Case of Aluminum Alloy Scrap Consolidation, Materials 7 (2014) 5664-5687 https://doi.org/10.3390/ma7085664
[14] M. El Mehtedi, P. Buonadonna, M. Carta, R. El Mohtadi, A. Mele, D. Morea, Sustainability Study of a New Solid-State Aluminum Chips Recycling Process: A Life Cycle Assessment Approach, 15 (2023) 11434 https://doi.org/10.3390/su151411434
[15] M. Carta, Ben Khalifa Noomane, P. Buonadonna, M. Alessandro, M. El Mehtedi, Life cycle assessment (LCA) of a novel solid-state recycling process for aluminum alloy AA6063 chips via direct hot rolling, (2024) https://doi.org/10.3390/met14121442
[16] M. Carta, N. Ben Khalifa, P. Buonadonna, R. El Mohtadi, F. Bertolino, M. El Mehtedi, Innovative Solid-State Recycling of Aluminum Alloy AA6063 Chips Through Direct Hot Rolling Process, Metals 14 (2024) 1442 https://doi.org/10.3390/met14121442
[17] J.R. Duflou, A.E. Tekkaya, M. Haase, T. Welo, K. Vanmeensel, K. Kellens, W. Dewulf, D. Paraskevas, Environmental assessment of solid state recycling routes for aluminium alloys: Can solid state processes significantly reduce the environmental impact of aluminium recycling?, CIRP Annals 64 (2015) 37-40 https://doi.org/10.1016/j.cirp.2015.04.051
