Life cycle assessment of natural fibers recovery techniques: A comparison between mechanical and chemical procedures
Francesco NAPOLITANO, Ersilia COZZOLINO, Alessandro Andrea SCHIAVO, Ilaria PAPA, Antonello ASTARITA, Pietro RUSSO
Abstract. In this research, two recovery procedures (mechanical and chemical) of a bio-based composite were compared in terms of mechanical performance and life cycle analysis (LCA). The results of tensile and flexural tests highlighted the performance of the secondary composites not inferior to those of the starting composite and, even, a significant improvement of the same for the new composite products obtained with the chemical recovery procedure. From a sustainable perspective, the LCA comparison of the two recovery processes, chemical and mechanical one, highlighted that the chemical procedure is more sustainable than the mechanical one. In fact, chemical recycling led to a reduction up to 83.1% in terms of environmental impact categories. The promising results of this work, both deriving from mechanical tests and LCA, encourage researchers to deeply understand the evolution of the polymer and fibers investigated in this work.
Keywords
Flax, PLA, Composite, LCA, Sustainability
Published online 5/7/2025, 10 pages
Copyright © 2025 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Francesco NAPOLITANO, Ersilia COZZOLINO, Alessandro Andrea SCHIAVO, Ilaria PAPA, Antonello ASTARITA, Pietro RUSSO, Life cycle assessment of natural fibers recovery techniques: A comparison between mechanical and chemical procedures, Materials Research Proceedings, Vol. 54, pp 2409-2418, 2025
DOI: https://doi.org/10.21741/9781644903599-260
The article was published as article 260 of the book Material Forming
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] S. Karuppannan Gopalraj, T. Kärki, A review on the recycling of waste carbon fibre/glass fibre-reinforced composites: fibre recovery, properties and life-cycle analysis, SN Appl. Sci. 2 (2020) 1-21 https://doi.org/10.1007/s42452-020-2195-4
[2] F. Meng, J. McKechnie, S.J. Pickering, Towards a circular economy for end-of-life carbon fibre composite materials via fluidised bed process, in: ICCM Int. Conf. Compos. Mater., 2017
[3] F. Hermansson, S. Heimersson, M. Janssen, M. Svanström, Can carbon fiber composites have a lower environmental impact than fiberglass?, Resour. Conserv. Recycl. 181 (2022) https://doi.org/10.1016/j.resconrec.2022.106234
[4] C. Morin, A. Loppinet-Serani, F. Cansell, C. Aymonier, Near- and supercritical solvolysis of carbon fibre reinforced polymers (CFRPs) for recycling carbon fibers as a valuable resource: State of the art, J. Supercrit. Fluids 66 (2012) https://doi.org/10.1016/j.supflu.2012.02.001
[5] C. Mattsson, A. André, M. Juntikka, T. Tr nkle, R. Sott, Chemical recycling of End-of-Life wind turbine blades by solvolysis/HTL, in: IOP Conf. Ser. Mater. Sci. Eng., 2020 https://doi.org/10.1088/1757-899X/942/1/012013
[6] R. Spina, B. Cavalcante, Evaluation of grinding of unfilled and glass fiber reinforced polyamide 6,6, Polymers (Basel). 12 (2020) https://doi.org/10.3390/polym12102288
[7] M. Rani, P. Choudhary, V. Krishnan, S. Zafar, A review on recycling and reuse methods for carbon fiber/glass fiber composites waste from wind turbine blades, Compos. Part B Eng. 215 (2021) https://doi.org/10.1016/j.compositesb.2021.108768
[8] M. Durante, L. Boccarusso, D. De Fazio, A. Formisano, A. Langella, Investigation on the Mechanical Recycling of Carbon Fiber-Reinforced Polymers by Peripheral Down-Milling, Polymers (Basel). 15 (2023) https://doi.org/10.3390/polym15040854
[9] T. ‐H Ko, The effect of pyrolysis on the mechanical properties and microstructure of carbon fiber‐reinforced and stabilized fiber‐reinforced phenolic resins for carbon/carbon composites, Polym. Compos. 14 (1993) https://doi.org/10.1002/pc.750140310
[10] S.R. Naqvi, H.M. Prabhakara, E.A. Bramer, W. Dierkes, R. Akkerman, G. Brem, A critical review on recycling of end-of-life carbon fibre/glass fibre reinforced composites waste using pyrolysis towards a circular economy, Resour. Conserv. Recycl. 136 (2018) https://doi.org/10.1016/j.resconrec.2018.04.013
[11] R.M. Cywar, N.A. Rorrer, C.B. Hoyt, G.T. Beckham, E.Y.X. Chen, Bio-based polymers with performance-advantaged properties, Nat. Rev. Mater. 7 (2022) https://doi.org/10.1038/s41578-021-00363-3
[12] A. Pokharel, K.J. Falua, A. Babaei-Ghazvini, B. Acharya, Biobased Polymer Composites: A Review, J. Compos. Sci. 6 (2022) https://doi.org/10.3390/jcs6090255
[13] V. Crupi, G. Epasto, F. Napolitano, G. Palomba, I. Papa, P. Russo, Green Composites for Maritime Engineering: A Review, J. Mar. Sci. Eng. 11 (2023) https://doi.org/10.3390/jmse11030599
[14] A. Pisupati, L. Willaert, F. Goethals, W. Uyttendaele, C.H. Park, Variety and growing condition effect on the yield and tensile strength of flax fibers, Ind. Crops Prod. 170 (2021) https://doi.org/10.1016/j.indcrop.2021.113736
[15] C. Elanchezhian, B.V. Ramnath, G. Ramakrishnan, M. Rajendrakumar, V. Naveenkumar, M.K. Saravanakumar, Review on mechanical properties of natural fiber composites, in: Mater. Today Proc., Elsevier Ltd, 2018: pp. 1785-1790 https://doi.org/10.1016/j.matpr.2017.11.276
[16] T.A. Hottle, M.M. Bilec, A.E. Landis, Sustainability assessments of bio-based polymers, Polym. Degrad. Stab. 98 (2013) https://doi.org/10.1016/j.polymdegradstab.2013.06.016
[17] V. Dornburg, I. Lewandowski, M. Patel, Comparing the Land Requirements, Energy Savings, and Greenhouse Gas Emissions Reduction of Biobased Polymers and Bioenergy, J. Ind. Ecol. 7 (2003) https://doi.org/10.1162/108819803323059424
[18] M.E. Grigore, Methods of recycling, properties and applications of recycled thermoplastic polymers, Recycling 2 (2017) https://doi.org/10.3390/recycling2040024
[19] S.A. Miller, W. V. Srubar, S.L. Billington, M.D. Lepech, Integrating durability-based service-life predictions with environmental impact assessments of natural fiber-reinforced composite materials, Resour. Conserv. Recycl. 99 (2015) https://doi.org/10.1016/j.resconrec.2015.04.004
[20] ASTM, ASTM D790, ASTM Int. (2017)
