Effect of surface preparation on adhesive bonding of CFRP compression molding laminates
Vincenzina Siciliani, Riccardo Pelaccia, Marco Alfano, Davide Castagnetti, Luca Raimondi, Alessandro Zanchi, Lorenzo Donati, Leonardo Orazi
Abstract. Composite structures are increasingly being used across various industries to promote structural lightweighting but also because of their excellent fatigue and corrosion resistance. To further minimize weight while preserving these benefits, adhesive bonding is now widely used to join advanced composite materials. However, effective surface pretreatments are essential to ensure suitable joint mechanical properties, including strength, fracture toughness, and long-term durability. The present study investigates viable surface preparation methods for a carbon fiber reinforced composite obtained through compression molding. Both standard mechanical abrasion and advanced ultrashort UV-laser treatment were evaluated. The effect of surface modification on surface morphology was evaluated using Scanning Electron Microscopy (SEM), while the corresponding modification of surface chemistry was determined using Energy Dispersive X-ray Spectroscopy (EDS). The combined results allowed us to judge the ability of the proposed strategies to modify surface morphology and remove post-processing contamination, primarily silicon-based. Besides, displacement-controlled tensile tests were conducted on adhesive-bonded single-lap joints to assess joint strength. The results show that UV laser ablation effectively removes contaminants on the matrix material without damaging the carbon fibers, improving adhesive joint shear strength compared to sanded specimens.
Keywords
Laser Texturing, Adhesive Bonding, Shear Strength
Published online 5/7/2025, 10 pages
Copyright © 2025 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Vincenzina Siciliani, Riccardo Pelaccia, Marco Alfano, Davide Castagnetti, Luca Raimondi, Alessandro Zanchi, Lorenzo Donati, Leonardo Orazi, Effect of surface preparation on adhesive bonding of CFRP compression molding laminates, Materials Research Proceedings, Vol. 54, pp 2193-2202, 2025
DOI: https://doi.org/10.21741/9781644903599-236
The article was published as article 236 of the book Material Forming
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] C. Leone, A. Paoletti, P. Babu Yanala, F. Lambiase, Improving bonding strength of aluminium-PEEK hybrid metal-polymer joints by two-step laser surface treatment, Optics & Laser Technology 170 (2024) 110304. https://doi.org/10.1016/j.optlastec.2023.110304
[2] A. Yudhanto, M. Alfano, G. Lubineau, Surface preparation strategies in secondary bonded thermoset-based composite materials: A review, Composites Part A: Applied Science and Manufacturing 147 (2021) 106443. https://doi.org/10.1016/j.compositesa.2021.106443
[3] N. Karthikeyan, J. Naveen, Progress in adhesive-bonded composite joints: A comprehensive review, Journal of Reinforced Plastics and Composites (2024) 07316844241248236. https://doi.org/10.1177/07316844241248236
[4] C. Morano, R. Tao, M. Alfano, G. Lubineau, Effect of Mechanical Pretreatments on Damage Mechanisms and Fracture Toughness in CFRP/Epoxy Joints, Materials 14 (2021) 1512. https://doi.org/10.3390/ma14061512
[5] A. Zhang, H. Jiang, Y. Li, R. Hu, Y. Ren, S. Jiang, Effects of surface micro-texturing laser-etching on adhesive property and failure behaviors of basalt fiber composite single-lap-joint, International Journal of Adhesion and Adhesives 135 (2024) 103831. https://doi.org/10.1016/j.ijadhadh.2024.103831
[6] S.P. Sharma, R. Vilar, Femtosecond laser micromachining of carbon fiber-reinforced epoxy matrix composites, Journal of Manufacturing Processes 84 (2022) 1568–1579. https://doi.org/10.1016/j.jmapro.2022.10.009
[7] R.I. Ledesma, F.L. Palmieri, Y. Lin, M.A. Belcher, D.R. Ferriell, S.K. Thomas, J.W. Connell, Picosecond laser surface treatment and analysis of thermoplastic composites for structural adhesive bonding, Composites Part B: Engineering 191 (2020) 107939. https://doi.org/10.1016/j.compositesb.2020.107939
[8] L. Sorrentino, S. Marfia, G. Parodo, E. Sacco, Laser treatment surface: An innovative method to increase the adhesive bonding of ENF joints in CFRP, Composite Structures 233 (2020) 111638. https://doi.org/10.1016/j.compstruct.2019.111638
[9] Y. Yuan, X. Guo, H. He, K. Zhang, W. Han, Rapid surface patterning to strengthen adhesive bonding of carbon fiber reinforced polymer by spatial shaping femtosecond laser, Optics & Laser Technology 180 (2025) 111562. https://doi.org/10.1016/j.optlastec.2024.111562
[10] A.A. Andarabi, K. Shelesh-Nezhad, T.N. Chakherlou, The effect of laser surface structuring patterns on the interfacial resistance of aluminum joints bonded with epoxy adhesive, International Journal of Adhesion and Adhesives 114 (2022) 103101. https://doi.org/10.1016/j.ijadhadh.2022.103101
[11] R. Tao, X. Li, A. Yudhanto, M. Alfano, G. Lubineau, Laser-based interfacial patterning enables toughening of CFRP/epoxy joints through bridging of adhesive ligaments, Composites Part A: Applied Science and Manufacturing 139 (2020) 106094. https://doi.org/10.1016/j.compositesa.2020.106094
[12] C. Morano, R. Tao, A. Wagih, M. Alfano, G. Lubineau, Toughening effect in adhesive joints comprising a CFRP laminate and a corrugated lightweight aluminum alloy, Materials Today Communications 32 (2022) 104103. https://doi.org/10.1016/j.mtcomm.2022.104103
[13] L. Raimondi, T.M. Brugo, A. Zucchelli, Fiber misalignment analysis in PCM-UD composite materials by Full Field Nodal Method, Composites Part C: Open Access 5 (2021) 100151. https://doi.org/10.1016/j.jcomc.2021.100151
[14] L. Raimondi, Effects of UD and twill reinforcements in hybrid sheet molding compound laminates, in: 2024: pp. 523–529. https://doi.org/10.21741/9781644903131-58
[15] G. Lubineau, M. Alfano, R. Tao, A. Wagih, A. Yudhanto, X. Li, K. Almuhammadi, M. Hashem, P. Hu, H.A. Mahmoud, F. Oz, Harnessing Extrinsic Dissipation to Enhance the Toughness of Composites and Composite Joints: A State‐of‐the‐Art Review of Recent Advances, Advanced Materials 36 (2024) 2407132. https://doi.org/10.1002/adma.202407132
[16] www.henkel-adhesives.com/it/it/prodotto/structural-adhesives/loctite_ea_94661.html
