Influence of punch velocity during high-speed blanking of 22MnB5 steel with electromagnetic drive
E. Galiev, M. Linnemann, S. Winter, L. Winter, V. Psyk, M. Dix
Abstract High blanking velocities offer many production advantages in terms of cutting edge quality and energy efficiency. Currently, hydraulic drives are used to accelerate the blanking punch in high-speed blanking (HSB) processes. This results in punch velocities in the range of 3 to 10 m/s. The main objective of the study is to extend the process limits in terms of punch velocity and to analyze the corresponding influence on the blanking zone properties. The approach is to evaluate an alternative drive concept, using electromagnetic (EM) forces, to accelerate the punch. The experimental setup consisting of an EM drive and a blanking tool was designed, implemented and used for an experimental parameter study. The resulting blanked surfaces of 22MnB5 steel were characterized by metallographic investigations focusing on adiabatic shear band (ASB) formation. The research methodology includes detailed numerical simulations of the blanking process using LS-DYNA, coupled with an experimental study to determine the shearing mechanisms for a maximum ASB distribution over the cut surface of the blanked parts. The results show the high potential of EM HSB to produce parts with a 100% ASB distribution in the cutting surface and thus further functional surfaces with unique properties.
Keywords
Adiabatic Shear Band, Simulation, Tool Design, High-Strength Steel
Published online 5/7/2025, 8 pages
Copyright © 2025 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: E. Galiev, M. Linnemann, S. Winter, L. Winter, V. Psyk, M. Dix, Influence of punch velocity during high-speed blanking of 22MnB5 steel with electromagnetic drive, Materials Research Proceedings, Vol. 54, pp 1656-1663, 2025
DOI: https://doi.org/10.21741/9781644903599-178
The article was published as article 178 of the book Material Forming
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Neugebauer, R., Psyk, V., Scheffler, C.: A novel tool design strategy for electromagnetic forming. Advanced Materials Research 1018, 333–340 (2014)
[2] Wang, B., Liu, Z., Cai, Y., Luo, X., Ma, H., Song, Q., Xiong, Z.: Advancements in material removal mechanism and surface integrity of high speed metal cutting: A review. International Journal of Machine Tools and Manufacture (2021). Https://doi.org/10.1016/j.ijmachtools.2021.103744
[3] Winter, S., Nestler, M., Galiev, E., Hartmann, F., Psyk, V., Kräusel, V., Dix, M.: Adiabatic blanking: influence of clearance, impact energy, and velocity on the blanked surface. Journal of Manufacturing and Materials Processing 5, 35 (2021)
[4] Cui, X., Yang, G., Yan, Z., Chen, X., Wang, H., Huang, C.: Enhanced forming height and accuracy of thin-walled aluminum alloy by impact pneumatic forming. Journal of Materials Processing Technology (2024). Https://doi.org/10.1016/j.jmatprotec.2024.118456
[5] Winter, S., Schmitz, F., Clausmeyer, T., Tekkaya, A.E., Wagner, M.F.X.: High temperature and dynamic testing of AHSS for an analytical description of the adiabatic cutting process. In: IOP Conference Series: Materials Science and Engineering, p. 12026. IOP Publishing
[6] Psyk, V., Linnemann, M., Sebastiani, G.: 4 – Electromagnetic pulse forming. In: Silberschmidt, V.V. (ed.) Mechanics of Materials in Modern Manufacturing Methods and Processing Techniques : Elsevier Series in Mechanics of Advanced Materials, pp. 111–142. Elsevier (2020)
[7] Tekkaya, A.E., Trompeter, M., Witulski, J.: Innovative sheet metal-forming processes. International Journal of Mechatronics and Manufacturing Systems 1, 157–170 (2008)
[8] Galiev, E., Winter, S., Linnemann, M., Winter, L., Psyk, V., Kräusel, V.: Numerical and experimental study of high-speed blanking of DC06 steel. Sheet Metal 2023 25, 27 (2023)
[9] Schmitz, F., Winter, S., Clausmeyer, T., Wagner, M.F.-X., Tekkaya, A.E.: Adiabatic blanking of advanced high-strength steels. CIRP Annals 69, 269–272 (2020)
[10] Chen, Z.H., Chan, L.C., Lee, T.C., Tang, C.Y.: An investigation on the formation and propagation of shear band in fine-blanking process. Journal of Materials Processing Technology (2003). Https://doi.org/10.1016/S0924-0136(03)00141-9
[11] Karantza, K.D., Manolakos, D.E.: Numerical Study on the Development of Adiabatic Shear Bands During High Strain-Rate Compression of AISI 1045 Steel: A Comparative Analysis Between Plane-Strain and Axisymmetric Problems. Materials 17, 5286 (2024)
[12] Dodd, B., Bai, Y.: Adiabatic shear localization: frontiers and advances. Elsevier (2012)