Solvent aided crystallization for purification of biodiesel synthesized from coconut oil

Solvent aided crystallization for purification of biodiesel synthesized from coconut oil

ACHOL Aguek Tengteng, WAN Nur Aisyah Wan Osman, SHAFIRAH Samsuri

Abstract. According to recent studies, employing refined cooking oils can increase biodiesel purity to as high as 98.86% to 100%. The use of solvent-aided crystallization (SAC) to purify biodiesel made from unrefined coconut oil (CO), which has better qualities like reduced density and ideal viscosity that improve fuel efficiency, is, nonetheless, mostly lacking in scientific literature. By examining the efficacy of SAC in purifying coconut oil-derived biodiesel utilizing 1-butanol as the solvent, this study seeks to bridge that gap.This paper assessed the effects of several SAC parameters, including coolant temperature, crystallization duration, and stirring rate, on the purity and yield of biodiesel using a One-Factor-at-a-duration (OFAT) methodology. The outcomes showed purities ranging from 89.83% to 100%, highlighting the possibility of high purity levels being attained by coconut oil following SAC treatment in contrast to other oils such as palm oil. Significantly, crude biodiesel made from coconut oil already showed a 90% purity, which is significantly higher than the 30.63% purity usually seen in palm oil. The study produced 100% pure biodiesel by adjusting SAC parameters, such as a coolant temperature of 9°C, crystallization period of 20 minutes, and stirring rate of 201 rpm. Additional analysis of the biodiesel’s physicochemical characteristics, such as density, viscosity, pour point, cloud point, total acid number, and oxidative stability, demonstrated that SAC has the potential to be an efficient and sustainable way to meet the high purity requirements needed for industrial biodiesel applications. These results imply that SAC employing 1-butanol might greatly improve the purity of biodiesel derived from coconut oil, assisting in the shift to renewable energy sources and promoting global sustainability objectives. It is advised that more study be done to improve SAC conditions and see whether it can be used with different feed stocks.

Keywords
Biodiesel, Coconut Oil, Coolant Temperature, Crystallization Time, Stirring Speed, Solvent Aided Crystallization

Published online 4/25/2025, 8 pages
Copyright © 2025 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: ACHOL Aguek Tengteng, WAN Nur Aisyah Wan Osman, SHAFIRAH Samsuri, Solvent aided crystallization for purification of biodiesel synthesized from coconut oil, Materials Research Proceedings, Vol. 53, pp 576-583, 2025

DOI: https://doi.org/10.21741/9781644903575-58

The article was published as article 58 of the book Decarbonization Technology

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] M. Berrios and R. L. Skelton, “Comparison of purification methods for biodiesel,” Chemical Engineering Journal, vol. 144, no. 3, pp. 459-465, 2008/11/01/ 2008. https://doi.org/https://doi.org/10.1016/j.cej.2008.07.019
[2] L. C. Meher, D. Vidya Sagar, and S. N. Naik, “Technical aspects of biodiesel production by transesterification—a review,” Renewable and Sustainable Energy Reviews, vol. 10, no. 3, pp. 248- 268, 2006/06/01/ 2006. https://doi.org/https://doi.org/10.1016/j.rser.2004.09.002
[3] M. A. Ahmad and S. Samsuri, “Biodiesel Purification via Ultrasonic-Assisted Solvent-Aided Crystallization,” Crystals, vol. 11, no. 2, p. 212, 2021. [Online]. Available: https://www.mdpi.com/2073-4352/11/2/212
[4] W. N. A. Wan Osman, N. A. I. Badrol, and S. Samsuri, “Biodiesel Purification by Solvent-Aided Crystallization Using 2-Methyltetrahydrofuran,” Molecules, vol. 28, no. 3, p. 1512, 2023. [Online]. Available: https://www.mdpi.com/1420-3049/28/3/1512
[5] M. Lapuerta, J. Rodríguez-Fernández, D. Fernández-Rodríguez, and R. Patiño-Camino, “Cold flow and filterability properties of n-butanol and ethanol blends with diesel and biodiesel fuels,” Fuel, vol. 224, pp. 552-559, 2018/07/15/ 2018. https://doi.org/https://doi.org/10.1016/j.fuel.2018.03.083
[6] E. Alptekin and M. Canakci, “Determination of the density and the viscosities of biodiesel–diesel fuel blends,” Renewable Energy, vol. 33, pp. 2623-2630, 12/01 2008. https://doi.org/10.1016/j.renene.2008.02.020
[7] H. Siva Subramanian, “Examination of Thermo-physical properties of Ethanol and Gasoline numerically and its behaviour at different temperatures,” International Journal of Advanced Research, vol. 4, 10/31 2016. https://doi.org/10.21474/IJAR01/2006
[8] W. N. M. Wan Ghazali, R. Mamat, H. H. Masjuki, and G. Najafi, “Effects of biodiesel from different feedstocks on engine performance and emissions: A review,” Renewable and Sustainable Energy Reviews, vol. 51, no. C, pp. 585-602, 2015. [Online]. Available: https://EconPapers.repec.org/RePEc:eee:rensus:v:51:y:2015:i:c:p:585-602