Fabrication of layered graphene-supported in-situ polymerized polyaniline (PANI) crystals as conductive electrode composite for hydrogen production

Fabrication of layered graphene-supported in-situ polymerized polyaniline (PANI) crystals as conductive electrode composite for hydrogen production

UMAIR Ishtiaq, ALI SAMER Muhsan, BAWADI Abdullah, MUHAMMAD AFIF FIKRI bin Zambri

Abstract. One of the potential routes for hydrogen production is through water electrolysis. Graphene (Gr) – Polyaniline (PANI) coated Fluorine-doped tin oxide (FTO) glass nano-composite electrode has potential to be a viable alternative to the commonly employed but rare and exorbitant platinum electrode. Well-dispersed graphene paste was synthesized and homogeneously tape- casted on FTO glass cuts in three separate coating layers onto which PANI crystals were grown by in-situ polymerization. The fabricated nano-composite electrode was characterized by Field Emission Scanning Electron Microscopy (FESEM) followed by Raman spectroscopy. It was well- observed that the triple coated electrode promoted the highest growth of PANI crystals onto it as densely coated graphene substrate rendered structural support and highest number of active sites that facilitated in-situ polymerization and subsequent growth of PANI crystals. This observation was supplemented by Raman spectroscopy results that clearly determined active presence of PANI crystals and multi-layered graphene by the analysis of D, G and 2D peaks. The conductivity of the electrode composite was quantified through resistance measurement by a multimeter. By increasing graphene layers from uncoated to triple coated, the average resistivity value reduced from 0.4Ω to 0.1Ω respectively, indicating presence of highest amount of PANI crystals on triple coated electrode thereby making it electro-conductive in order to be utilized for water electrolysis for hydrogen production.

Keywords
Water Electrolysis, Hydrogen Production, Polyaniline (PANI), Nano-Composite Electrode, Graphene Dispersion

Published online 4/25/2025, 14 pages
Copyright © 2025 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: UMAIR Ishtiaq, ALI SAMER Muhsan, BAWADI Abdullah, MUHAMMAD AFIF FIKRI bin Zambri, Fabrication of layered graphene-supported in-situ polymerized polyaniline (PANI) crystals as conductive electrode composite for hydrogen production, Materials Research Proceedings, Vol. 53, pp 360-373, 2025

DOI: https://doi.org/10.21741/9781644903575-35

The article was published as article 35 of the book Decarbonization Technology

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] I. Arto, I. Capellán-Pérez, R. Lago, G. Bueno, and R. Bermejo, The energy requirements of a developed world, Energy for Sustainable Development, vol. 33, pp. 1–13. https://doi: 10.1016/J.ESD.2016.04.001.
[2] P. Nejat, F. Jomehzadeh, M. M. Taheri, M. Gohari, and M. Z. Muhd, A global review of energy consumption, CO2 emissions and policy in the residential sector (with an overview of the top ten CO2 emitting countries), Renewable and Sustainable Energy Reviews, vol. 43, pp. 843–862. https://doi: 10.1016/J.RSER.2014.11.066.
[3] S. E. Hosseini and M. A. Wahid, Hydrogen production from renewable and sustainable energy resources: Promising green energy carrier for clean development, Renewable and Sustainable Energy Reviews, vol. 57, pp. 850–866. https://doi: 10.1016/J.RSER.2015.12.112.
[4] L. Barelli, G. Bidini, F. Gallorini, and S. Servili, Hydrogen production through sorption- enhanced steam methane reforming and membrane technology: A review, Energy, vol. 33, no. 4, pp. 554–570. https://doi: 10.1016/J.ENERGY.2007.10.018.
[5] J. Mohammed-Ibrahim and H. Moussab, Recent advances on hydrogen production through seawater electrolysis, Mater Sci Energy Technol, vol. 3, pp. 780–807. https://doi: 10.1016/J.MSET.2020.09.005.
[6] S. Anwar, F. Khan, Y. Zhang, and A. Djire, Recent development in electrocatalysts for hydrogen production through water electrolysis, Int J Hydrogen Energy, vol. 46, no. 63, pp. 32284–32317. https://doi: 10.1016/J.IJHYDENE.2021.06.191.
[7] Y. Zhang, L. Li, P. Xu, B. Liu, Y. Shuai, and B. Li, Hydrogen production through biomass gasification in supercritical water: A review from exergy aspect, Int J Hydrogen Energy, vol. 44, no. 30, pp. 15727–15736. https://doi: 10.1016/J.IJHYDENE.2019.01.151.
[8] M. Mehrpooya and R. Habibi, A review on hydrogen production thermochemical water- splitting cycles, J Clean Prod, vol. 275, p. 123836. https://doi: 10.1016/J.JCLEPRO.2020.123836.
[9] F. Safari and I. Dincer, A review and comparative evaluation of thermochemical water splitting cycles for hydrogen production, Energy Convers Manag, vol. 205, p. 112182. https://doi: 10.1016/J.ENCONMAN.2019.112182.
[10] C.-H. Liao, C.-W. Huang, and J. C. S. Wu, Hydrogen Production from Semiconductor-based Photocatalysis via Water Splitting, Catalysts, vol. 2, no. 4, pp. 490–516. https://doi: 10.3390/catal2040490.
[11] T. Hisatomi and K. Domen, Reaction systems for solar hydrogen production via water splitting with particulate semiconductor photocatalysts, Nat Catal, vol. 2, no. 5, pp. 387–399. https://doi: 10.1038/s41929-019-0242-6.
[12] R. D. Tentu and S. Basu, Photocatalytic water splitting for hydrogen production, Curr Opin Electrochem, vol. 5, no. 1, pp. 56–62. https://doi: 10.1016/J.COELEC.2017.10.019.
[13] A. Chen and P. Holt-Hindle, Platinum-Based Nanostructured Materials: Synthesis, Properties, and Applications, Chem Rev, vol. 110, no. 6, pp. 3767–3804. https://doi: 10.1021/cr9003902.
[14] M. Cao, D. Wu, and R. Cao, Recent Advances in the Stabilization of Platinum Electrocatalysts for Fuel‐Cell Reactions, Chem Cat Chem, vol. 6, no. 1, pp. 26–45. https://doi: 10.1002/cctc.201300647.
[15] D. Navadeepthy, A. Rebekah, C. Viswanthan, and N. Ponpandian, Boosting the kinetics of oxygen and hydrogen evolution in alkaline water splitting using nickel ferrite /N-graphene nanocomposite as a bifunctional electrocatalyst, Int J Hydrogen Energy, vol. 46, no. 41, pp. 21512–21524. https://doi: 10.1016/J.IJHYDENE.2021.03.244.
[16] W. Li, C. Wang, and X. Lu, Conducting polymers-derived fascinating electrocatalysts for advanced hydrogen and oxygen electrocatalysis, Coord Chem Rev, vol. 464, p. 214555. https://doi: 10.1016/J.CCR.2022.214555.
[17] H. Khoshsang and A. Ghaffarinejad, Electrochemical synthesis of polyaniline silver- palladium composite coated nickel foam as an electrocatalyst for the hydrogen evolution reaction, Inorg Chem Commun, vol. 142, p. 109631. https://doi: 10.1016/J.INOCHE.2022.109631.
[18] H. Huang et al., Graphene Nanoarchitectonics: Recent Advances in Graphene‐Based Electrocatalysts for Hydrogen Evolution Reaction, Advanced Materials, vol. 31, no. 48. https://doi: 10.1002/adma.201903415.
[19] B. Xia, Y. Yan, X. Wang, and X. W. (David) Lou, Recent progress on graphene-based hybrid electrocatalysts, Mater. Horiz., vol. 1, no. 4, pp. 379–399. https://doi: 10.1039/C4MH00040D.
[20] B. Winther-Jensen, K. Fraser, C. Ong, M. Forsyth, and D. R. MacFarlane, Conducting polymer composite materials for hydrogen generation, Advanced Materials, vol. 22, no. 15, pp. 1727–1730. https://doi: 10.1002/adma.200902934.
[21] D. Sun et al., Polymers and polyoxometalate induced Co/WC@NC for electrocatalytic hydrogen production, J Solid State Chem, vol. 308, p. 122879. https://doi: 10.1016/J.JSSC.2022.122879.
[22] S. Bhadra, D. Khastgir, N. K. Singha, and J. H. Lee, Progress in preparation, processing and applications of polyaniline, Prog Polym Sci, vol. 34, no. 8, pp. 783–810. https://doi: 10.1016/J.PROGPOLYMSCI.2009.04.003.
[23] H. Wang, J. Lin, and Z. X. Shen, Polyaniline (PANi) based electrode materials for energy storage and conversion, Journal of Science: Advanced Materials and Devices, vol. 1, no. 3, pp. 225–255. https://doi: 10.1016/J.JSAMD.2016.08.001.
[24] M. R. Saeb and P. Zarrintaj, Polyaniline/graphene-based nanocomposites, in Fundamentals and Emerging Applications of Polyaniline, Elsevier, 2019, pp. 165–175. https://doi: 10.1016/B978-0-12-817915-4.00010-5.
[25] H. Wang, Q. Hao, X. Yang, L. Lu, and X. Wang, Effect of Graphene Oxide on the Properties of Its Composite with Polyaniline, ACS Appl Mater Interfaces, vol. 2, no. 3, pp. 821–828. https://doi: 10.1021/am900815k.
[26] Z. Wang, J. Qian, J. Cao, S. Wang, and T. Wen, A study of multilayer tape casting method for anode-supported planar type solid oxide fuel cells (SOFCs), J Alloys Compd, vol. 437, no. 1–2, pp. 264–268. https://doi: 10.1016/J.JALLCOM.2006.07.110.
[27] S. A. Akbar, A. Rochliadi, V. Suendo, N. Saidi, Lelifajri, and A. Mardhiah, A raman spectroscopy study of the polyaniline electrode on ZN-polyaniline rechargeable batteries, Rasayan Journal of Chemistry, vol. 11, no. 4, pp. 1525–1531. https://doi: 10.31788/RJC.2018.1144064.
[28] L. M. Malard, M. A. Pimenta, G. Dresselhaus, and M. S. Dresselhaus, Raman spectroscopy in graphene, Phys Rep, vol. 473, no. 5–6, pp. 51–87. https://doi: 10.1016/J.PHYSREP.2009.02.003.
[29] A. Y. Lee et al., Raman study of D* band in graphene oxide and its correlation with reduction, Appl Surf Sci, vol. 536, p. 147990. https://doi: 10.1016/J.APSUSC.2020.1479