Experimental investigations on a process adapted material testing method for hydroforming of tubular components
Jonas Reblitz, Marion Merklein
Abstract. In the automotive sector, an important strategy for reducing CO2 emissions is lightweight construction. In this regard, body-in-white parts offer a high potential for weight reduc-tions by substituting conventional steel parts with tubular, aluminum-based components. Due to their high strength-to-weight-ratio and high crashworthiness, tube profiles are often used as safety-relevant car body components. As lightweight design becomes increasingly important, complex part geometries are required, which can be realized by hydroforming. Especially for structural components, an exact determination of the material properties is necessary, in order to achieve a high prediction accuracy of FE-simulations. Thus, a failure-free component production has to be enabled. However, due to a varying stress and strain state, the tensile test according to DIN EN ISO 6892 as a standard characterization method is only insufficiently suitable for the characterization of tube profiles for a hydroforming process. For this purpose, a new testing method has been developed and investigated within this paper, which provides new insights regarding the material behavior of tubular components. The testing-rig is based on a bulge test, which reproduces the stress and strain state of a hydroforming process. By comparing the results of the material characterization with those of a tensile test, the differences in the mechanical properties depending on the testing method are evaluated. During the test, the surface strains and the internal pressure are varied and recorded. Based on these findings, a more accurate prediction of FE-simulations is aspired in future research work.
Keywords
Hydroforming, Aluminum, Tube Bulge Test
Published online 4/1/2025, 8 pages
Copyright © 2025 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Jonas Reblitz, Marion Merklein, Experimental investigations on a process adapted material testing method for hydroforming of tubular components, Materials Research Proceedings, Vol. 52, pp 43-50, 2025
DOI: https://doi.org/10.21741/9781644903551-6
The article was published as article 6 of the book Sheet Metal 2025
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Information on https://commission.europa.eu/strategy-and-policy/priorities-2019-2024/european-green-deal/delivering-european-green-deal_en#making-transport-sustainable-for-all, (October 17, 2024).
[2] Information on https://commission.europa.eu/strategy-and-policy/priorities-2019-2024/european-green-deal_en, (October 17, 2024).
[3] Information on http: https://www.destatis.de/Europa/EN/Topic/Environment-energy/CarbonDioxideRoadTransport.html, (October 17, 2024).
[4] Information on https://www.cargroup.org/wp-content/uploads/2021/02/Aluminum-Battery-Enclosures-Constellium-February-2021-FINAL.pdf, (October 17, 2024).
[5] Information on https://www.audi-technology-portal.de/en/download?file=1946, (October 17, 2024).
[6] P. Bortot, E. Ceretti, C. Giardini, The determination of flow stress of tubular material for hydroforming applications, Journal of Materials Processing Technology 203 (2008) 381-388. https://doi.org/10.1016/j.jmatprotec.2007.10.047
[7] J. Reblitz, R. Trân, V. Kräusel, M. Merklein, Evaluation of the properties of AA7020 tubes generated by a heat treatment based hydroforming process, Materials Research Proceedings 25 (2023) 221-228. https://doi.org/10.21741/9781644902417-28
[8] J. Reblitz, F. Reuther, R. Trân, V. Kräusel, M. Merklein, Numerical and Experimental Investigations on the Mechanical Properties of Milled Specimens from an AA7020 Tube, Key Engineering Materials 926 (2022) 1949-1958. https://doi.org/10.4028/p-oxs247
[9] F. Reuther, T. Lieber, J. Heidrich, V. Kräusel, Numerical Investigations on Thermal Forming Limit Testing with Local Inductive Heating for Hot Forming of AA7075, Materials 14 (2021) 1882. https://doi.org/10.3390/ma14081882
[10] F. Ostermann, Anwendungstechnologie Aluminium, third ed., Springer Vieweg, Berlin, 2014. https://doi.org/10.1007/978-3-662-43807-7
[11] A. Khalfallah, M. C. Oliveira, J. L. Alves, T. Zribi, Mechanical Characterization and Constitutive Parameter Identification of Anisotropic Tubular Materials for Hydroforming Applications, International Journal of Mechanical Sciences 104 (2015) 91-103. https://doi.org/10.1016/j.ijmecsci.2015.09.017
[12] Y. M. Hwang, C. W. Wang, Flow stress evaluation of zinc copper and carbon steel tubes by hydraulic bulge tests considering their anisotropy, Journal of Materials Processing Technology 209 (2009) 4423-4428. https://doi.org/10.1016/j.jmatprotec.2008.10.033
[13] J. Liu, X. Liu, L. Yang, H. Liang, Determination of flow stress of thin-walled tube based on digital speckle correlation method for hydroforming applications, International Journal of Advanced Manufacturing Technologies 69 (2013) 439-450. https://doi.org/10.1007/s00170-013-5039-1
[14] Z. He, S. Yuan, Y. Lin, X. Wang, W. Hu, Analytical model for tube hydro-bulging test, part I: models for stress components and bulging zone profile, International Journal of Mechanical Sciences 87 (2014) 297-306. https://doi.org/10.1016/j.ijmecsci.2014.05.009
[15] M. Mohammadi, J. S. Karami, S. J. Hashemi, Forming limit diagram of aluminum/copper bi-layered tubes by bulge test, Int J Adv Manuf Technol 82 (2017) 1539-1549. https://doi.org/10.1007/s00170-017-0225-1
