Early-age properties of silicomanganese fume and metakaolin-based cement mortar designed using RSM
Muhammad NASIR, Ahmed Adil ALAMMARI, Abdulrahman Khalid ALKULAIBI, Mohammed Abdulghani BUSALEH, Mohammed IBRAHIM, A. B. M. Saiful ISLAM, Khalid Saqer ALOTAIBI, Fahad ANWAR
Abstract. Contemporary and viable construction needs have shifted the interest of research towards utilizing unconventional materials sourced from industrial wastes or by-products. In this paper, two locally available waste materials, namely silicomanganese fume (SMF) and metakaolin (MK) were used as a partial replacement to the ordinary Portland cement (OPC) to optimize their impact on the flow and early-age compressive strength by varying their dosages and calcination temperature employing a Response Surface Methodology (RSM). A total of 29 mortar mixes suggested by RSM were prepared by varying SMF and MK content (0 to 30%), SMF and MK temperature (ambient to 700°C) at a constant sand to binder ratio of 2 and the water-to-cement ratio of 0.4. The experimental responses were used in the program to optimize the studied parameters, analyze the data statistically and develop prediction models. It was discovered that the flow is favored by the synergistic effect of high-volume SMF with low calcination temperature or MK with high calcination temperature. On the other hand, early strength development is favored by high-volume MK with high calcination temperature or moderate-volume SMF with moderate calcination temperature. This study will help promote valorization of solid waste materials, minimize energy consumption, preserve natural resources, lower carbon footprints in the concrete sector and possibly attain reasonable technical advantages.
Keywords
Supplementary Cementitious Materials, Flow, Compressive Strength, Material Design, Modelling, Statistical Analysis
Published online 2/25/2025, 9 pages
Copyright © 2025 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Muhammad NASIR, Ahmed Adil ALAMMARI, Abdulrahman Khalid ALKULAIBI, Mohammed Abdulghani BUSALEH, Mohammed IBRAHIM, A. B. M. Saiful ISLAM, Khalid Saqer ALOTAIBI, Fahad ANWAR, Early-age properties of silicomanganese fume and metakaolin-based cement mortar designed using RSM, Materials Research Proceedings, Vol. 48, pp 617-625, 2025
DOI: https://doi.org/10.21741/9781644903414-67
The article was published as article 67 of the book Civil and Environmental Engineering for Resilient, Smart and Sustainable Solutions
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] R. Maddalena, J. J. Roberts, and A. Hamilton, “Can Portland cement be replaced by low- carbon alternative materials? A study on the thermal properties and carbon emissions of innovative cements,” 2018. https://doi.org/10.1016/j.jclepro.2018.02.138.
[2] B. J. Van Ruijven, D. P. Van Vuuren, W. Boskaljon, M. L. Neelis, D. Saygin, and M. K. Patel, “Long-term model-based projections of energy use and CO 2 emissions from the global steel and cement industries,” vol. 112, pp. 15–36, 2016. https://doi.org/10.1016/j.resconrec.2016.04.016.
[3] F. P. Sankoh, X. Yan, and Q. Tran, “Environmental and Health Impact of Solid Waste Disposal in Developing Cities: A Case Study of Granville Brook Dumpsite, Freetown, Sierra Leone,” J Environ Prot (Irvine, Calif), vol. 2013, no. 07, pp. 665–670, Jul. 2013. https://doi.org/10.4236/JEP.2013.47076.
[4] M. Nasir et al., “Evolution of room-cured alkali-activated silicomanganese fume-based green mortar designed using Taguchi method,” Constr Build Mater, vol. 307, p. 124970, Nov. 2021. https://doi.org/10.1016/J.CONBUILDMAT.2021.124970.
[5] M. Nasir, M. A. M. Johari, M. Maslehuddin, M. O. Yusuf, and M. A. Al-Harthi, “Influence of heat curing period and temperature on the strength of silico-manganese fume-blast furnace slag-based alkali-activated mortar,” Constr Build Mater, vol. 251, p. 118961, Aug. 2020. https://doi.org/10.1016/J.CONBUILDMAT.2020.118961.
[6] M. Nasir, M. A. Megat Johari, M. Maslehuddin, and M. Olalekan Yusuf, “Magnesium sulfate resistance of alkali/slag activated silico-manganese fume-based composites,” Constr Build Mater, vol. 265, p. 120851, Dec. 2020. https://doi.org/10.1016/J.CONBUILDMAT.2020.120851.
[7] S. A. Jagtap, M. N. Shirsath, and S. L. Karpe, “Effect of metakaolin on the properties of concrete,” International Research Journal of Engineering and Technology, vol. 4, no. 7, pp. 643–645, 2017.
[8] S. Angadi, J. S. R. S. R. Prasad, and S. Joshi, “Influence of Metakaolin in Concrete as Partial Replacement of Cement,” International Journal of Civil Engineering and Technology (IJCIET, vol. 9, no. 7, pp. 105–111, 2018.
[9] A. L. Bonifacio and P. Archbold, “The effect of calcination conditions on oat husk ash pozzolanic activity,” Mater Today Proc, vol. 65, pp. 622–628, Jan. 2022. https://doi.org/10.1016/J.MATPR.2022.03.197.
[10] A. Ejbouh, A. Ech-chebab, M. Galai, S. Hassi, H. Benqlilou, and M. E. Touhami, “Calcined clay process for durability performance of concrete pipe in simulated semi-arid area in Morocco,” Mater Today Proc, vol. 58, pp. 1403–1407, Jan. 2022. https://doi.org/10.1016/J.MATPR.2022.02.332.
[11] D. L. Pillay, O. B. Olalusi, P. O. Awoyera, C. Rondon, A. M. Echeverría, and J. T. Kolawole, “A Review of the Engineering Properties of Metakaolin Based Concrete: Towards Combatting Chloride Attack in Coastal/Marine Structures,” Advances in Civil Engineering, vol. 2020, 2020. https://doi.org/10.1155/2020/8880974.
[11] P. Rathish Kumar, Cs. Reddy, M. Saleem Baig, and A. Professor, “Compressive strength performance of high strength concretes using binary supplementary cementitious materials” Cement Wapno Beton, 1 (2014): 8-16.