–
Quality Assurance in Special Processes on the Example of the Welding Process
RAMDAM Kiran, KLIMECKA-TATAR Dorota
Abstract. This paper introduces a comprehensive framework aimed at ensuring quality assurance in welding procedures within the construction sector. The framework encompasses the adoption of standardized Welding Procedure Specifications (WPS), rigorous training and certification processes for welders, and the integration of state-of-the-art technologies such as the Internet of Things (IoT) for real-time monitoring. It underscores the significance of comprehending welding metallurgy and optimizing welding processes to elevate both quality standards and operational efficiency. The implementation of this framework has resulted in notable enhancements in welding quality control, manifesting in significant reductions in defects, increased production efficiency, and heightened workplace safety measures. By amalgamating theoretical insights (analysis of factors determining the welding quality) with practical strategies, this framework endeavors to cultivate a culture of continuous improvement and excellence within the construction industry.
Keywords
Special Processes, Welding, Quality Assurance, Welding Quality
Published online 10/20/2024, 8 pages
Copyright © 2024 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: RAMDAM Kiran, KLIMECKA-TATAR Dorota, Quality Assurance in Special Processes on the Example of the Welding Process, Materials Research Proceedings, Vol. 45, pp 67-74, 2024
DOI: https://doi.org/10.21741/9781644903315-9
The article was published as article 9 of the book Terotechnology XIII
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] A.B. Pereira, F.J.M.Q. de Melo, Quality Assessment and Process Management of Welded Joints in Metal Construction – A Review, Metals 10 (2020) art.115. https://doi.org/10.3390/met10010115
[2] P. Hanus, K. Konečný, Influence of the welding process on martensitic high strength steel, Prod. Eng. Arch. 3(2) (2014) 31-34. https://doi.org/10.30657/pea.2014.03.08
[3] A. Kapil, S. Q. Moinuddin and A. Sharma, Digitization of welding process, in P. Rakesh, J. Paulo Davim (Eds.), Joining Processes for Dissimilar and Advanced Materials, Elsevier, 2022, 483 512. https://doi.org/10.1016/b978-0-323-85399-6.00020-5
[4] D. Klimecka-Tatar, M. Ingaldi, Digitization of processes in manufacturing SMEs – Value stream mapping and OEE analysis. Procedia Computer Science 200 (2022) 660–668. https://doi.org/10.1016/j.procs.2022.01.264
[5] T.M. Lubecki, F. Bai, Weld quality assessment based on arc sensing for robotic welding, In Proc. AIM 2015 IEEE/ASME Int. Conf. Adv. Intell. Mechatronics, Busan, Korea, 7 11 July 2015, 1496–1501. https://doi.org/10.1109/AIM.2015.7222753
[6] L. Quintino, R. Ferraz and I. Fernandes, International education, qualification and certification systems in welding. Welding in the World 52 (2008) 71-79. https://doi.org/10.1007/BF03266619
[7] D.C. Salvador, Welding Certification and Standards: Ensuring quality and reliability in fabrication. Int. J. Adv. Res. Sci., Comm. Technol. 3 (2023) 1008-1012. https://doi.org/10.48175/ijarsct-11907
[8] S. Schumacher, R. Hall, A. Waldman-Brown and L. Sanneman, Technology Adoption of Collaborative Robots for Welding in Small and Medium-sized Enterprises: A Case Study Analysis, in Proc. CPSL 2022 Conf. Prod. Systems and Logistics (2022) 462-471, Hannover. https://doi.org/10.15488/12176
[9] J. Stavridis, A. Papacharalampopoulos and P. Stavropoulos, Quality assessment in laser welding: a critical review. Int. J. Adv. Manuf. Technol. 94 (2018) 1825-1847. https://doi.org/10.1007/s00170-017-0461-4
[10] M. Kukliński, A. Bartkowska, D. Przestacki and G. Kinal, Influence of microstructure and chemical composition on microhardness and wear properties of laser borided MONEL 400, Materials 13 (2020) art. 5757. https://doi.org/10.3390/ma13245757
[11] M. Natesh, S.K. Selvaraj, N. Arivazhagan, M. Manikandan, S. Tofil, N. Radek, Y. Mistry and M. Sm, Effect of Silicon Segregation in the Argon Arc Welded INCOLOY 20 Superalloy, Silicon 15 (2023) 365-379. https://doi.org/10.1007/s12633-022-01986-z
[12] N. Radek, J. Pietraszek and A. Goroshko, The impact of laser welding parameters on the mechanical properties of the weld, AIP Conf. Proc. 2017 (2018) art. 20025. https://doi.org/10.1063/1.5056288
[13] R. Ulewicz, F. Novy and R. Dwornicka, Quality and work safety in metal foundry, METAL 2020 – 29th Int. Conf. Metall. Mater., (2020) 1287-1293. https://doi.org/10.37904/metal.2020.3649
[14] T. Lipiński, Influence of surface refinement on microstructure of Al-Si cast alloys processed by welding method, Manuf. Technol. 15 (2015) 576-581.
[15] D. Bartkowski, A. Bartkowska, M. Popławski and D. Przestacki, Microstructure, microhardness, corrosion and wear resistance of B, Si and B-Si coatings produced on C45 steel using laser processing, Metals 10 (2020) art. 792. https://doi.org/10.3390/met10060792
[16] A. Dudek, B. Lisiecka and R. Ulewicz, The effect of alloying method on the structure and properties of sintered stainless steel, Arch. Metall. Mater. 62 (2017) 281-287. https://doi.org/10.1515/amm-2017-0042
[17] I. Miletić, A. Ilić, R.R. Nikolić, R. Ulewicz, L. Ivanović and N. Sczygiol, Analysis of selected properties of welded joints of the HSLA Steels, Materials 13 (2020) art. 1301. https://doi.org/10.3390/ma13061301
[18] P. Jonšta, P. Váňová, S. Brožová, P. Pustějovská, J. Sojka, Z. Jonšta and M. Ingaldi, Hydrogen embrittlement of welded joint made of supermartensitic stainless steel in environment containing sulfane, Arch. Metall. Mater. 61 (2016) 709-711. https://doi.org/10.1515/amm-2016-0121
[19] A. Wronska, J. Andres, T. Altamer, A. Dudek and R. Ulewicz, Effect of tool pin length on microstructure and mechanical strength of the FSW joints of Al 7075 metal sheets, Communications – Scientific Letters of the University of Žilina 21 (2019) 40-47.
[20] M. Patek, R. Konar, A. Sladek and N. Radek, Non-destructive testing of split sleeve welds by the ultrasonic TOFD method, Manuf. Technol. 14 (2014) 403-407. https://doi.org/10.21062/ujep/x.2014/a/1213-2489/MT/14/3/403
[21] R. Ulewicz, Practical application of quality tools in the cast iron foundry, Manuf. Technol. 14 (2014) 104-111. https://doi.org/10.21062/ujep/x.2014/a/1213-2489/MT/14/1/104
[22] N. Radek, J. Pietraszek, J. Bronček and P. Fabian, Properties of Steel Welded with CO2 Laser, Lecture Notes in Mech. Eng. (2020) 571-580. https://doi.org/10.1007/978-3-030-33146-7_65
[23] K. Czerwińska, R. Dwornicka and A. Pacana, Improving the quality of friction welding by selected methods, METAL 2021 – 30th Int. Conf. Metall. Mater., (2021) 360-365. https://doi.org/10.37904/metal.2021.4126
[24] A. Dudek, B. Lisiecka, N. Radek, Ł.J. Orman and J. Pietraszek, Laser Surface Alloying of Sintered Stainless Steel, Materials 15 (2022) art. 6061. https://doi.org/10.3390/ma15176061
[25] N. Radek, A. Kalinowski, J. Pietraszek, J. Orman, M. Szczepaniak, A. Januszko, J. Kamiński, J. Bronček and O. Paraska, Formation of coatings with technologies using concentrated energy stream, Prod. Eng. Arch. 28 (2022) 117-122. https://doi.org/10.30657/pea.2022.28.13
[26] M. Opydo, A. Dudek and R. Kobyłecki, Characteristics of solids accumulation on steel samples during co-combustion of biomass and coal in a CFB boiler, Biomass and Bioenergy 120 (2019) 291-300. https://doi.org/10.1016/j.biombioe.2018.11.027
[27] N. Radek, R. Dwornicka, Fire properties of intumescent coating systems for the rolling stock, Communications – Scientific Letters of the University of Žilina 22 (2020) 90-96. https://doi.org/10.26552/com.C.2020.4.90-96
[28] M. Kuklinski, A. Bartkowska and D. Przestacki, Laser alloying monel 400 with amorphous boron to obtain hard coatings, Materials 12 (2019) art. 3494. https://doi.org/10.3390/ma12213494
[29] K. Knop, The Use of Quality Tools to Reduce Surface Defects of Painted Steel Structures, Manuf. Technol. 21 (2021) 805-817. https://doi.org/10.21062/mft.2021.088
[30] N. Radek, J. Konstanty, J. Pietraszek, Ł.J. Orman, M. Szczepaniak and D. Przestacki, The effect of laser beam processing on the properties of WC-Co coatings deposited on steel, Materials 14 (2021) art. 538. https://doi.org/10.3390/ma14030538
[31] E. Skrzypczak-Pietraszek, J. Pietraszek, Seasonal changes of flavonoid content in Melittis melissophyllum L. (Lamiaceae), Chemistry and Biodiversity 11 (2014) 562-570. https://doi.org/10.1002/cbdv.201300148
[32] T. Lipiński, J. Pietraszek, Corrosion of the S235JR Carbon Steel after Normalizing and Overheating Annealing in 2.5% Sulphuric Acid at Room Temperature, Mater. Res. Proc. 24 (2022) 102-108. https://doi.org/10.21741/9781644902059-16
[33] T. Lipiński, J. Pietraszek, Influence of animal slurry on carbon C35 steel with different microstructure at room temperature, Engineering for Rural Development 21 (2022) 344-350. https://doi.org/10.22616/ERDev.2022.21.TF115
[34] T. Lipiński, J. Pietraszek, Effect of 10% NaCl on basic carbon structural P235TR2 steel at 10ºC, Engineering for Rural Development 22 (2023) 185-190. https://doi.org/10.22616/ERDev.2023.22.TF035
[35] G. Majewski, Ł.J. Orman, M. Telejko, N. Radek, J. Pietraszek and A. Dudek, Assessment of thermal comfort in the intelligent buildings in view of providing high quality indoor environment, Energies 13 (2020) art. 1973. https://doi.org/10.3390/en13081973
[36] M. Ingaldi, S.T. Dziuba and A. Cierniak-Emerych, Analysis of problems during implementation of Lean Manufacturing elements, MATEC Web of Conf. 183 (2018) art. 1004. https://doi.org/10.1051/matecconf/201818301004
[37] R. Ulewicz, B. Krstić and M. Ingaldi, Mining Industry 4.0 – Opportunities and Barriers, Acta Montanistica Slovaca 27 (2022) 291-305. https://doi.org/10.46544/AMS.v2i2.02
[38] A. Pacana, K. Czerwińska, L. Bednárová and J. Džuková, Analysis of a practical approach to the concept of sustainable development in a manufacturing company in the automotive sector, Waste Forum (2020) 151-161.
[39] K. Czerwińska, R. Dwornicka and A. Pacana, Improving the quality of castings used in light vehicles, METAL 2022 – 31st Int. Conf. Metall. Mater., (2022) 841-847. https://doi.org/10.37904/metal.2022.4523
[40] J. Pietraszek, N. Radek and A.V. Goroshko, Challenges for the DOE methodology related to the introduction of Industry 4.0, Prod. Eng. Arch. 26 (2020) 190-194. https://doi.org/10.30657/pea.2020.26.33
[41] J. Pietraszek, E. Skrzypczak-Pietraszek, The uncertainty and robustness of the principal component analysis as a tool for the dimensionality reduction, Solid State Phenom. 235 (2015) 1-8. https://doi.org/10.4028/www.scientific.net/SSP.235.1
[42] J. Pietraszek, A. Gądek-Moszczak and T. Toruński, Modeling of errors counting system for PCB soldered in the wave soldering technology, Adv. Mater. Res. 874 (2014) 139-143. https://doi.org/10.4028/www.scientific.net/AMR.874.139
[43] J. Pietraszek, A. Szczotok, M. Kołomycki, N. Radek and E. Kozień, Non-parametric assessment of the uncertainty in the analysis of the airfoil blade traces, METAL 2017 – 26th Int. Conf. Metall. Mater., (2017) 1412-1418.
[44] J. Pietraszek, Fuzzy regression compared to classical experimental design in the case of flywheel assembly, Lecture Notes in Computer Science 7267 LNAI (2012) 310-317. https://doi.org/10.1007/978-3-642-29347-4_36
[45] J. Pietraszek, The modified sequential-binary approach for fuzzy operations on correlated assessments, Lecture Notes in Computer Science 7894 LNAI (2013) 353-364. https://doi.org/10.1007/978-3-642-38658-9_32
[46] J. Pietraszek, L. Wojnar, The bootstrap approach to the statistical significance of parameters in RSM model, ECCOMAS Congress 2016 – Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering 1 (2016) 2003-2009. https://doi.org/10.7712/100016.1937.9138
