–
Influence of Single-Mode and Multimode Fiber Laser Surface Micromachining of DLC Coatings
KALINOWSKI Artur, RADEK Norbert, MULCZYK Krystian
Abstract. This paper presents a study on the impact of single-mode and multimode fiber lasers on the texturing of diamond-like carbon coating surface (DLC). By varying laser process parameters, researchers analyzed how the geometric profile of grooves on a coated surface changed. The experimental results revealed significant differences based on the laser beam mode, suggesting precise control over the properties of the DLC (diamond-like carbon) layer using an infrared laser beam. DLC coatings were applied on stainless steel 1.4034 using PVD magnetron sputtering deposition.
Keywords
Laser Processing, DLC, Single-Mode Laser, Multimode Laser
Published online 10/20/2024, 8 pages
Copyright © 2024 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: KALINOWSKI Artur, RADEK Norbert, MULCZYK Krystian, Influence of Single-Mode and Multimode Fiber Laser Surface Micromachining of DLC Coatings, Materials Research Proceedings, Vol. 45, pp 33-40, 2024
DOI: https://doi.org/10.21741/9781644903315-5
The article was published as article 5 of the book Terotechnology XIII
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] A. Kimpel. Technologie Spawane, Gliwice, Wydawnictwo Politechniki Śląskiej (2012).
[2] D.K. Rajak, A. Kumar, A. Behera and P.L. Menezes, Diamond-like carbon (DLC) coatings: classification, properties and applications, Applied Sciences 11 (2021) art.4445. https://doi.org/10.3390/app11104445
[3] A. Kalinowski, N. Radek, P. Sęk and J. Pietraszek, The effect of laser infrared radiation on the surface modification of DLC coatings, AIP Conf. Proc. 3130 (2024) art.020014. https://doi.org/10.1063/5.0204985
[4] A. Kalinowski, Tribological properties of textured diamond-like carbon coatings, Technical Transactions 121 (2023) art. e004. https://doi.org/10.37705/TechTrans/e2023004
[5] K. Knop, E. Olejarz and R. Ulewicz, Evaluating and Improving the Effectiveness of Visual Inspection of Products from the Automotive Industry, Lecture Notes in Mechanical Engineering (2019) 231-243. https://doi.org/10.1007/978-3-030-17269-5_17
[6] R. Ulewicz, M. Mazur, Economic aspects of robotization of production processes by example of a car semi-trailers manufacturer, Manuf. Technol. 19 (2019) 1054-1059. https://doi.org/10.21062/ujep/408.2019/a/1213-2489/MT/19/6/1054
[7] T. Lipiński, Corrosion rate of the X2CrNiMoN22-5-3 duplex stainless steel annealed at 500°C, Acta Physica Polonica A 130 (2016) 993-995. https://doi.org/10.12693/APhysPolA.130.993
[8] A. Dudek, M. Klimas, Composites based on titanium alloy Ti-6Al-4V with an addition of inert ceramics and bioactive ceramics for medical applications fabricated by spark plasma sintering (SPS method), Mater. Werkst. 46 (2015) 237-247. https://doi.org/10.1002/mawe.201500334
[9] A. Goroshko, V. Royzman and J. Pietraszek, Construction and practical application of hybrid statistically-determined models of multistage mechanical systems, Mechanika 20 (2014) 489-493. https://doi.org/10.5755/j01.mech.20.5.8221
[10] I. Drach, A. Goroshko and R. Dwornicka, Design Principles of Horizontal Drum Machines with Low Vibration, Adv. Sci. Technol. Res. J. 15 (2021) 258-268. https://doi.org/10.12913/22998624/136441
[11] I. Dominik, F. Kaszuba and R. Dwornicka, Ionic polymer-metal composite actuators: Investigation of parametric model based on electrical values, Solid State Phenom. 235 (2015) 52-57. https://doi.org/10.4028/www.scientific.net/SSP.235.52
[12] J. Lorkowski, O. Grzegorowska, M.S. Kozień and I. Kotela, Effects of breast and prostate cancer metastases on lumbar spine biomechanics: Rapid in silico evaluation, Advances in Experimental Medicine and Biology 1096 (2018) 31-39. https://doi.org/10.1007/5584_2018_192
[13] E. Skrzypczak-Pietraszek, Phytochemistry and biotechnology approaches of the genus Exacum, The Gentianaceae – Volume 2: Biotechnology and Applications (2015) 383-401. https://doi.org/10.1007/978-3-642-54102-5_16
[14] T. Lipiński, J. Pietraszek and A. Wach, Influence of oxygen content in medium carbon steel on bending fatigue strength, Engineering for Rural Development 21 (2022) 351-356. https://doi.org/10.22616/ERDev.2022.21.TF116
[15] A. Bąkowski, M. Kekez, L. Radziszewski and A. Sapietova, Vibroacoustic real time fuel classification in diesel engine, Arch. Acoust. 43 (2018) 385-395. https://doi.org/10.24425/123910
[16] R. Ulewicz, M. Ulewicz, Problems in the Implementation of the Lean Concept in the Construction Industries, Lect. Notes Civ. 47 (2020) 495-500. https://doi.org/10.1007/978-3-030-27011-7_63
[17] R. Ulewicz, D. Kleszcz and M. Ulewicz, Implementation of Lean Instruments in Ceramics Industries, Manag. Syst. Prod. Eng. 29 (2021) 203-207. https://doi.org/10.2478/mspe-2021-0025
[18] R. Dwornicka, The impact of the power plant unit start-up scheme on the pollution load, Adv. Mater. Res. 874 (2014) 63-69. https://doi.org/10.4028/www.scientific.net/AMR.874.63
[19] A. Szczotok, J. Nawrocki and J. Pietraszek, The Impact of the Thickness of the Ceramic Shell Mould on the (γ + γ′) Eutectic in the IN713C Superalloy Airfoil Blade Casting, Arch. Metall. Mater. 62 (2017) 587-593. https://doi.org/10.1515/amm-2017-0087
[20] D. Siwiec, R. Dwornicka and A. Pacana, Improving the process of achieving required microstructure and mechanical properties of 38MNVS6 steel, METAL 2020 – 29th Int. Conf. Metall. Mater., (2020) 591-596. https://doi.org/10.37904/metal.2020.3525
[21] A. Wrońska, A. Dudek, Characteristics of surface layer of sintered stainless steels after remelting using GTAW method, Archives of Civil and Mechanical Engineering 14 (2014) 425-432. https://doi.org/10.1016/j.acme.2013.10.011
[22] A. Gądek-Moszczak, N. Radek, I. Pliszka, J. Augustyn-Nadzieja and Ł.J. Orman, Nano X-ray Tomography Application for Quantitative Surface Layer Geometry Analysis after Laser Beam Modification, Materials 15 (2022) art. 5935. https://doi.org/10.3390/ma15175935
[23] N. Radek, J. Pietraszek, Ł.J. Orman, M. Szczepaniak, J. Świderski, M. Radek and D. Gontarski, The effect of laser treatment on operational properties of ESD coatings, METAL 2021 – 30th Int. Conf. Metall. Mater., (2021) 876-882. https://doi.org/10.37904/metal.2021.4212
[24] N. Radek, J. Pietraszek and Ł. Pasieczynski, Technology and application of anti-graffiti coating systems for rolling stock, METAL 2019 – 28th Int. Conf. Metall. Mater., (2019) 1127-1132.
[25] N. Radek, R. Dwornicka, Fire properties of intumescent coating systems for the rolling stock, Communications – Scientific Letters of the University of Žilina 22 (2020) 90-96. https://doi.org/10.26552/com.C.2020.4.90-96
[26] K. Milewski, M. Madej, Structure and mechanical properties of diamond-like carbon (Dlc) coatings doped with silicon, Metalurgija 59 (2020) 481-484.
[27] N. Radek, J. Pietraszek, M. Radek and O. Paraska, The influence of plasma cutting parameters on the geometric structure of cut surfaces, Mater. Res. Proc. 17 (2020) 132-137. https://doi.org/10.21741/9781644901038-20
[28] K. Czerwinska, R. Dwornicka and A. Pacana, Improving quality control of siluminial castings used in the automotive industry, METAL 2020 – 29th Int. Conf. Metall. Mater., (2020) 1382-1387. https://doi.org/10.37904/metal.2020.3661
[29] T. Lipiński, R. Ulewicz, The effect of the impurities spaces on the quality of structural steel working at variable loads, Open Eng. 11 (2021) 233-238. https://doi.org/10.1515/eng-2021-0024
[30] J. Pietraszek, N. Radek and A.V. Goroshko, Challenges for the DOE methodology related to the introduction of Industry 4.0, Prod. Eng. Arch. 26 (2020) 190-194. https://doi.org/10.30657/pea.2020.26.33
[31] J. Pietraszek, A. Gądek-Moszczak and T. Toruński, Modeling of errors counting system for PCB soldered in the wave soldering technology, Adv. Mater. Res. 874 (2014) 139-143. https://doi.org/10.4028/www.scientific.net/AMR.874.139
[32] J. Pietraszek, A. Szczotok and E. Kocyłowska, Factorial approach to assessment of GPU computational efficiency in surrogate models, Adv. Mater. Res. 874 (2014) 157-162. https://doi.org/10.4028/www.scientific.net/AMR.874.157
[33] J. Pietraszek, M. Seńcio, J. Diakun, A. Gądek-Moszczak and M. Stojek, The parametric RSM model with higher order terms for the meat tumbler machine process, Solid State Phenom. 235 (2015) 37-44. https://doi.org/10.4028/www.scientific.net/SSP.235.37
[34] J. Pietraszek, L. Wojnar, The bootstrap approach to the statistical significance of parameters in RSM model, ECCOMAS Congress 2016 – Proc. 7th European Congress on Computational Methods in Applied Sciences and Engineering 1 (2016) 2003-2009. https://doi.org/10.7712/100016.1937.9138
[35] J. Pietraszek, R. Dwornicka, M. Krawczyk and M. Kołomycki, The non-parametric approach to the quantification of the uncertainty in the design of experiments modelling, UNCECOMP 2017 – Proc. 2nd Int. Conf. Uncert. Quant. Comp. Sci. Eng. (2017) 598-604. https://doi.org/10.7712/120217.5395.17225
[36] J. Pietraszek, Fuzzy regression compared to classical experimental design in the case of flywheel assembly, Lecture Notes in Computer Science 7267 LNAI (2012) 310-317. https://doi.org/10.1007/978-3-642-29347-4_36
[37] J. Pietraszek, The modified sequential-binary approach for fuzzy operations on correlated assessments, Lecture Notes in Computer Science 7894 LNAI (2013) 353-364. https://doi.org/10.1007/978-3-642-38658-9_32
[38] A. Szczotok, J. Nawrocki, A. Gądek-Moszczak and M. Kołomycki, The bootstrap analysis of one-way ANOVA stability in the case of the ceramic shell mould of airfoil blade casting, Solid State Phenom. 235 (2015) 24-30. https://doi.org/10.4028/www.scientific.net/SSP.235.24
[39] L. Wojnar, A. Gądek-Moszczak and J. Pietraszek, On the role of histomorphometric (stereological) microstructure parameters in the prediction of vertebrae compression strength, Image Analysis and Stereology 38 (2019) 63-73. https://doi.org/10.5566/ias.2028
[40] B. Jasiewicz, J. Pietraszek, S. Duda, S. Pietrzak, B. Pruszczyński, T. Parol, T. Potaczek and A. Gądek-Moszczak, Inter-observer and intra-observer reliability in the radiographic measurements of paediatric forefoot alignment, Foot and Ankle Surgery 27 (2021) 371-376. https://doi.org/10.1016/j.fas.2020.04.015
[41] SPI Lasers UK – G 3.1 Pulsed Fibre Laser (3m iBDO), Installation Guide and User Manual, (2010).
