–
Identification of Non-Compliance of Children’s Products Based on Ishikawa Diagram
CHWIST Katarzyna, INGALDI Manuela
Abstract. Qualitative analysis of produced goods, particularly the analysis of the causes of non-compliance, is crucial for every company as it directly impacts the satisfaction of customers who utilize such products. The fishbone diagram is the most popular tool that can be effectively utilized for such analysis in a straightforward manner. In the studied company, this diagram was employed to analyze the issue of unsatisfactory product quality. Through brainstorming, potential causes of the problem were organized and appropriately classified in the article. The aim was to implement corrective actions and focus on key areas that cause the most waste.
Keywords
Children’s Stroller Industry, Manufacturing Non-Compliances, Ishikawa Diagram, Brainstorming
Published online 10/20/2024, 8 pages
Copyright © 2024 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: CHWIST Katarzyna, INGALDI Manuela, Identification of Non-Compliance of Children’s Products Based on Ishikawa Diagram, Materials Research Proceedings, Vol. 45, pp 232-239, 2024
DOI: https://doi.org/10.21741/9781644903315-27
The article was published as article 27 of the book Terotechnology XIII
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] J. Cieśla, R. Ulewicz, The Future of Automotive Quality Control: How Cloud-Based Reporting is Changing the Game, Management Systems in Production Engineering, 32(1) (2024) 72-79. https://doi.org/10.2478/mspe-2024-0008
[2] M. Krynke, D. Klimecka-Tatar, The use of Computer Simulation Techniques in Production Management, Materials Research Proceedings, 24 (2022) 126-133. https://doi.org/10.21741/9781644902059-19
[3] M. Krynke, K. Knop, M. Mazur, Maintenance management of large-size rolling bearings in heavy-duty machinery, Acta Montanistica Slovaca, 27(2) (2022) 327-341. https://doi.org/10.46544/AMS.v27i2.04
[4] J. Cyganiuk, A. Idzikowski, P. Kuryło, E. Tertel, Analysis of the Possibility of Using the D3 Discipline of the G8D Method in Solving Quality Management Problems for Nok Products, System Safety: Human – Technical Facility, 4(1) (2022) 196-204. https://doi.org/10.2478/czoto-2022-0021
[5] R. Ulewicz, K. Czerwińska, A. Pacana, A Rank Model of Casting Non-Conformity Detection Methods in the Context of Industry 4.0, Materials, 16(2) (2023) 723. https://doi.org/10.3390/ma16020723
[6] B. Stauss, A. Schoeler, Complaint management profitability: What do complaint managers know?. Managing service quality, 14(2/3) (2004) 147-156. https://doi.org/ 10.1108/09604520410528572
[7] H. Estelami, Competitive and Procedural Determinants of Delight and Disappointment in Consumer Complaint Outcomes, Journal of Service Research, 42 (2000) 285-300. https://doi.org/10.1177/109467050023006
[8] T.W. Andreassen, From disgust to delight: Do customers hold a grudge?, Journal of Service Research, 4 (2001) 39-49. https://doi.org/10.1177/109467050141004
[9] M. Ingaldi, Complaint Analysis as Part of Service Quality and Safety Management, Materials Research Proceedings, 34 (2023) 278-287. https://doi.org/ 10.21741/9781644902691-33
[10] I. Putra, S. Kot, A. Ibrahim, I. Rajiani, Human Resource Productivity: Integrating Resilience Engineering, Motivation, and Health Safety, Production Engineering Archives, 30(1) (2024) 105-114. https://doi.org/10.30657/pea.2024.30.10
[11] Badawi, Tjahjono, H. K., Muafi, The role of corporate reputation moderation of banking services. Polish Journal of Management Studies, 15(1) (2017) 15-25, https://doi.org/ 10.17512/pjms.2017.15.1.02.
[12] K. Kowalik, D. Klimecka-Tatar, The process approach to service quality management, Production Engineering Archives, 18 (2018) 31-34. https://doi.org/10.30657/pea.2018.18.05
[13] L. Jum’a, The effect of value-added activities of key suppliers on the performance of manufacturing firms. Polish Journal of Management Studies, 22(1) (2020), 231-246; https://doi.org/10.17512/pjms.2020.22.1.15.
[14] J Furman, T. Małysa, The role of visual management in the organization of safe work in production companies, Production Engineering Archives, 29(2) (2023) 195-200. https://doi.org/10.30657/pea.2023.29.23
[15] M. Jagusiak-Kocik, PDCA cycle as a part of continuous improvement in the production company – a case study, Production Engineering Archives, 14 (2017) 19-22. https://doi.org/10.30657/pea.2017.14.05
[16] K. Kowalik, Diagram Ishikawy w teorii i praktyce zarządzania jakością, Archiwum wiedzy inżynieryjnej, 3(1) (2018) 15-17.
[17] K. Sak, M. Ingaldi, Jakość w przemyśle mleczarskim, Archiwum wiedzy inżynieryjnej, 2(2), (2017) 10-13.
[18] S. Słowiński, Zarządzanie i inżynieria produkcji. first ed., Wydawnictwo Uczelniane Politechniki Koszalińskiej, Koszalin, 2015.
[19] S. Borkowski, Tradycyjne narzędzia zarządzania jakością. Teoria i praktyka, first ed., Oficyna wydawnicza Stowarzyszenie Menadżerów Jakości i Produkcji, Częstochowa, 2021.
[20] R. Dwornicka, The impact of the power plant unit start-up scheme on the pollution load, Adv. Mater. Res. 874 (2014) 63-69. https://doi.org/10.4028/www.scientific.net/AMR.874.63
[21] Ł.J. Orman, G. Majewski, N. Radek and J. Pietraszek, Analysis of Thermal Comfort in Intelligent and Traditional Buildings, Energies 15 (2022) art. 6522 https://doi.org/10.3390/en15186522
[22] Ł.J. Orman, N. Krawczyk, N. Radek, S. Honus, J. Pietraszek, L. Dębska, A. Dudek and A. Kalinowski, Comparative Analysis of Indoor Environmental Quality and Self-Reported Productivity in Intelligent and Traditional Buildings, Energies 16 (2023) art. 6663 https://doi.org/10.3390/en16186663
[23] N. Radek, A. Pietraszek, A. Kozień, K. Radek and J. Pietraszek, Matching Computational Tools to User Competence Levels in Education of Engineering Data Processing, Mater. Res. Proc. 34 (2023) 453-459. https://doi.org/10.21741/9781644902691-52
[24] K. Czerwinska, R. Dwornicka and A. Pacana, Improving quality control of siluminial castings used in the automotive industry, METAL 2020 – 29th Int. Conf. Metall. Mater. (2020) 1382-1387. https://doi.org/10.37904/metal.2020.3661
[25] D. Siwiec, R. Dwornicka and A. Pacana, Improving the process of achieving required microstructure and mechanical properties of 38MNVS6 steel, in METAL 2020 – 29th Int. Conf. Metall. Mater. (2020) 591-596. https://doi.org/10.37904/metal.2020.3525
[26] N. Radek, J. Pietraszek and Ł. Pasieczynski, Technology and application of anti-graffiti coating systems for rolling stock, METAL 2019 – 28th Int. Conf. Metall. Mater. (2019) 1127-1132.
[27] N. Radek, R. Dwornicka, Fire properties of intumescent coating systems for the rolling stock, Communications – Scientific Letters of the University of Žilina 22 (2020) 90-96. https://doi.org/10.26552/com.C.2020.4.90-96
[28] N. Radek, A. Kalinowski, J. Orman, M. Szczepaniak, J. Świderski, D. Gontarski, J. Bronček and J. Pietraszek, Operational properties of DLC coatings and their potential application, METAL 2022 – 31st Int. Conf. Metall. Mater. (2022) 531-536. https://doi.org/10.37904/metal.2022.4491
[29] T. Lipinski, J. Pietraszek, Influence of animal slurry on carbon C35 steel with different microstructure at room temperature, Engineering for Rural Development 21 (2022) 344-350. https://doi.org/10.22616/ERDev.2022.21.TF115
[30] T. Lipinski, J. Pietraszek and A. Wach, Influence of oxygen content in medium carbon steel on bending fatigue strength, Engineering for Rural Development 21 (2022) 351-356. https://doi.org/10.22616/ERDev.2022.21.TF116
[31] A. Szczotok, J. Nawrocki and J. Pietraszek, The Impact of the Thickness of the Ceramic Shell Mould on the (γ + γ′) Eutectic in the IN713C Superalloy Airfoil Blade Casting, Arch. Metall. Mater. 62 (2017) 587-593. https://doi.org/10.1515/amm-2017-0087
[32] N. Radek, J. Pietraszek, J. Bronček and P. Fabian, Properties of Steel Welded with CO2 Laser, Lecture Notes in Mech. Eng. (2020) 571-580. https://doi.org/10.1007/978-3-030-33146-7_65
[33] N. Radek, A. Kalinowski, J. Pietraszek, Ł.J. Orman, M. Szczepaniak, A. Januszko, J. Kamiński, J. Bronček and O. Paraska, Formation of coatings with technologies using concentrated energy stream, Prod. Eng. Arch. 28 (2022) 117-122. https://doi.org/10.30657/pea.2022.28.13
[34] A. Gądek-Moszczak, N. Radek, I. Pliszka, J. Augustyn-Nadzieja, Ł.J. Orman, Nano X-ray Tomography Application for Quantitative Surface Layer Geometry Analysis after Laser Beam Modification, Materials 15 (2022) art.5935 https://doi.org/10.3390/ma15175935
[35] N. Radek, J. Pietraszek, Ł.J. Orman, M. Szczepaniak, J. Świderski, M. Radek and D. Gontarski, The effect of laser treatment on operational properties of ESD coatings, METAL 2021 – 30th Int. Conf. Metall. Mater. (2021) 876-882. https://doi.org/10.37904/metal.2021.4212
[36] A. Dudek, B. Lisiecka, N. Radek, Ł.J. Orman and J. Pietraszek, Laser Surface Alloying of Sintered Stainless Steel, Materials 15 (2022) art.6061 https://doi.org/10.3390/ma15176061
[37] N. Radek, J. Pietraszek, M. Radek and Paraska O. The influence of plasma cutting parameters on the geometric structure of cut surfaces, Mater. Res. Proc. 17 (2020) 132-137. https://doi.org/10.21741/9781644901038-20
[38] A. Goroshko, V. Royzman and J. Pietraszek, Construction and practical application of hybrid statistically-determined models of multistage mechanical systems, Mechanika 20 (2014) 489-493. https://doi.org/10.5755/j01.mech.20.5.8221
[39] I. Drach, A. Goroshko and R. Dwornicka, Design Principles of Horizontal Drum Machines with Low Vibration, Advances in Science and Technology Research Journal 15 (2021) 258-268. https://doi.org/10.12913/22998624/136441
[40] R. Dwornicka, J. Pietraszek, The outline of the expert system for the design of experiment, Prod. Eng. Arch. 20 (2018) 43-48. https://doi.org/10.30657/pea.2018.20.09
[41] J. Pietraszek, N. Radek and A.V. Goroshko, Challenges for the DOE methodology related to the introduction of Industry 4.0, Prod. Eng. Arch. 26 (2020) 190-194. https://doi.org/10.30657/pea.2020.26.33
[42] J. Pietraszek, M. Seńcio, J. Diakun, A. Gądek-Moszczak and M. Stojek, The parametric RSM model with higher order terms for the meat tumbler machine process, Solid State Phenomena 235 (2015) 37-44. https://doi.org/10.4028/www.scientific.net/SSP.235.37
[43] J. Pietraszek, L. Wojnar, The bootstrap approach to the statistical significance of parameters in RSM model, ECCOMAS Congress 2016 – Proc. 7th Europ. Congr. Comp. Methods in Appl. Sci. Eng. 1 (2016) 2003-2009. https://doi.org/10.7712/100016.1937.9138
[44] J. Pietraszek, A. Szczotok and E. Kocyłowska, Factorial approach to assessment of GPU computational efficiency in surrogate models, Adv. Mater. Res. 874 (2014) 157-162. https://doi.org/10.4028/www.scientific.net/AMR.874.157
[45] J. Pietraszek, A. Gadek-Moszczak and T. Toruński, Modeling of errors counting system for PCB soldered in the wave soldering technology, Adv. Mater. Res. 874 (2014) 139-143. https://doi.org/10.4028/www.scientific.net/AMR.874.139
[46] J. Pietraszek, Fuzzy regression compared to classical experimental design in the case of flywheel assembly, Lecture Notes in Computer Science 7267 LNAI (2012) 310-317. https://doi.org/10.1007/978-3-642-29347-4_36
[47] J. Pietraszek, The modified sequential-binary approach for fuzzy operations on correlated assessments, Lecture Notes in Computer Science 7894 LNAI (2013) 353-364. https://doi.org/10.1007/978-3-642-38658-9_32
[48] P. Fobel, A. Kuzior, The future (Industry 4.0) is closer than we think. Will it also be ethical?, AIP Conf. Proc. 2186 (2019) – art.80003 https://doi.org/10.1063/1.5137987
[49] A. Kuzior, J. Ober and J. Karwot, Stakeholder expectation of corporate social responsibility practices: A case study of pwik rybnik, Poland, Energies 14 (2021) art.3337 https://doi.org/10.3390/en14113337
[50] A. Kuzior, T. Vasylieva, O. Kuzmenko, V. Koibichuk and P. Brożek, Global Digital Convergence: Impact of Cybersecurity, Business Transparency, Economic Transformation, and AML Efficiency, J. Open Innov.: Technol. Market, and Complexity 8 (2022) art.195 https://doi.org/10.3390/joitmc8040195
[51] A. Kuzior, S. Arefiev and Z. Poberezhna, Informatization of innovative technologies for ensuring macroeconomic trends in the conditions of a circular economy, J. Open Innov.: Technol. Market, and Complexity 9 (2023) art.100001 https://doi.org/10.1016/j.joitmc.2023.01.001
