–
Optimizing Financial Market Stability through AI-Based Risk Management
KUZIOR Aleksandra, KOLDOVSKIY Artem, REKUNENKO Ihor
Abstract. This study examines the impact of AI-based risk management on financial market stability, utilizing both econometric analysis and real-world case studies. The research focuses on financial institutions such as JPMorgan Chase, Goldman Sachs, BlackRock, and others that have successfully implemented Artificial intelligence (AI) algorithms to analyze market trends and trading patterns, leading to more informed investment decisions and better overall portfolio performance. The econometric analysis reveals a positive and statistically significant relationship between AI-based risk management and financial market stability. Institutions leveraging AI technologies for risk management experience lower levels of volatility, better risk assessment, and improved decision-making, contributing to greater overall stability in financial markets. The study also identifies challenges faced by institutions implementing AI-based risk management systems, including the need for high-quality data, algorithm complexity, and regulatory compliance. To address these challenges and maximize the benefits of AI in risk management, several recommendations are proposed. These include investing in data quality and governance, enhancing regulatory frameworks, fostering collaboration and knowledge sharing, investing in employee training and development, monitoring and evaluating AI systems regularly, and considering the ethical and social implications of AI adoption. The findings suggest that AI-based risk management has the potential to significantly enhance financial market stability.
Keywords
Financial Market Stability, AI-Based Risk Management, Econometric Analysis, Macroeconomic Indicators, Investment in AI Technologies, Market Volatility
Published online 10/20/2024, 9 pages
Copyright © 2024 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: KUZIOR Aleksandra, KOLDOVSKIY Artem, REKUNENKO Ihor, Optimizing Financial Market Stability through AI-Based Risk Management, Materials Research Proceedings, Vol. 45, pp 223-231, 2024
DOI: https://doi.org/10.21741/9781644903315-26
The article was published as article 26 of the book Terotechnology XIII
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] K. Shafranova, N. Navolska and A. Koldovskyi, Navigating the digital frontier: a comparative examination of Central Bank Digital Currency (CBDC) and the Quantum Financial System (QFS), SocioEconomic Challenges 8(1) (2024) 90-111. https://doi.org/10.61093/sec.8(1).90-111.2024.
[2] A. Guley, A. Koldovskyi, Digital Currencies of Central Banks (CBDC): Advantages and Disadvantages, Financial Markets, Institutions and Risks 7(4) (2023) 54-66. https://doi.org/10.61093/fmir.7(4).54-66.2023
[3] K. Olorunnimbe, H. Viktor, Deep learning in the stock market – a systematic survey of practice, backtesting, and applications, Artif. Intell. Rev. 56 (2023) 2057-2109. https://doi.org/10.1007/s10462-022-10226-0
[4] J. Arifovic, X.Z. He and L. Wei, Machine learning and speed in high-frequency trading, J. Econ. Dyn. Control 139 (2022) art. 104438. https://doi.org/10.1016/j.jedc.2022.104438
[5] B.G. Buchanan, D. Wright, The impact of machine learning on UK financial services, Oxford Review of Economic Policy 37(3) (2021) 537-563. https://doi.org/10.1093/oxrep/grab016
[6] H. Arslanian, F. Fischer, The future of finance: The impact of FinTech, AI, and crypto on financial services, Springer, 2019.
[7] G.G.S. Fletcher, M.M. Le, The Future of AI Accountability in the Financial Markets, Vanderbilt J. Ent. Technol. Law 24 (2021) 289.
[8] S. Sun, R. Wang and B. An, Reinforcement learning for quantitative trading, ACM Trans. Intell. Syst. Technol. 14(3) (2023) art.44. https://doi.org/10.1145/3582560
[9] R. Chopra, G.D. Sharma, Application of artificial intelligence in stock market forecasting: a critique, review, and research agenda, J. Risk and Financial Manag. 14(11) (2021) art. 526. https://doi.org/10.3390/jrfm14110526
[10] C.A. Nametala, J.V.D. Souza, A. Pimenta and E.G. Carrano, Use of econometric predictors and artificial neural networks for the construction of stock market investment bots, Comp. Econ. 61(2) (2023) 743-773. https://doi.org/10.1007/s10614-021-10228-0
[11] G. Cohen, Algorithmic trading and financial forecasting using advanced artificial intelligence methodologies, Mathematics 10 (2022) art.3302. https://doi.org/10.3390/math10183302
[12] A.M. Rahmani, B. Rezazadeh, M. Haghparast, W.C. Chang and S.G. Ting, Applications of artificial intelligence in the economy, including applications in stock trading, market analysis, and risk management, IEEE Access 11 (2023) 80769-80793. https://doi.org/10.1109/ACCESS.2023.3300036
[13] M. El Hajj, J. Hammoud, Unveiling the influence of artificial intelligence and machine learning on financial markets: A comprehensive analysis of AI applications in trading, risk management, and financial operations, J. Risk and Financial Manag. 16(10) (2023) art. 434. https://doi.org/10.3390/jrfm16100434
[14] World Bank. World Bank’s Fall 2023 Regional Economic Updates. (2024). https://www.worldbank.org/en/news/press-release/2023/10/04/world-bank-fall-2023-regional-economic-updates (accessed on 15 May 2024).
[15] International Monetary Fund. IMF Annual Report. IMF Policy Paper, International Monetary Fund: Washington, D.C., USA, (2024). https://www.imf.org/external/pubs/ft/ar/2023/ (accessed on 15 May 2024).
[16] National Bank of Ukraine. Strategy of the Ukrainian financial sector development until 2025. (2024). https://bank.gov.ua/admin_uploads/article/Strategy_FS_2025_eng.pdf (accessed on 15 May 2024).
[17] National Bank of Ukraine. Economic Situation and Outlook Explained (Based on July 2023 Inflation Report). (2023). https://bank.gov.ua/en/news/all/prosto-pro-ekonomiku-na-osnovi-materialiv-inflyatsiynogo-zvitu-za-lipen-2023-roku (accessed on 15 May 2024).
[18] National Bank of Ukraine. Financial Sector Statistics. (2024). https://bank.gov.ua/en/statistic/sector-financial (accessed on 15 May 2024).
[19] T. Lipiński, Quality of Low-Carbon Steel as a Distribution of Pollution and Fatigue Strength Heated in Oxygen Converter, Coatings 13 (2023) art. 1275. https://doi.org/10.3390/coatings13071275
[20] T. Lipiński, Quality, Microstructure, and Properties of Metal Alloys, Materials 16 (2023) art. 3019. https://doi.org/10.3390/ma16083019
[21] T. Lipiński, The Influence of the Proportions of Titanium and Boron in the Al and AlSi7-Based Master Alloy on the Microstructure and Mechanical Properties of Hypoeutectic Silumin, AlSi7Mg, Appl. Sci. 13 (2023) art. 12590. https://doi.org/10.3390/app132312590
[22] J. Pietraszek, A. Gądek-Moszczak and T. Toruński, Modeling of errors counting system for PCB soldered in the wave soldering technology, Adv. Mater. Res. 874 (2014) 139-143. https://doi.org/10.4028/www.scientific.net/AMR.874.139
[23] J. Pietraszek, M. Seńcio, J. Diakun, A. Gądek-Moszczak and M. Stojek, The parametric RSM model with higher order terms for the meat tumbler machine process, Solid State Phenom. 235 (2015) 37-44. https://doi.org/10.4028/www.scientific.net/SSP.235.37
[24] J. Pietraszek, N. Radek and A.V. Goroshko, Challenges for the DOE methodology related to the introduction of Industry 4.0, Prod. Eng. Arch. 26 (2020) 190-194. https://doi.org/10.30657/pea.2020.26.33
[25] N. Radek, J. Pietraszek and D. Klimecka-Tatar, Production of zinc coatings by electro-spark deposition, System Safety: Human – Technical Facility – Environment 2 (2020) 253-258. https://doi.org/10.2478/czoto-2020-0031
[26] N. Radek, R. Dwornicka and D. Gontarski, The impact of laser processing on the performance properties of electro-spark coatings, 14th World Congress in Computational Mechanics and ECCOMAS Congress 1000 (2021) 1-10. https://doi.org/10.23967/wccm-eccomas.2020.336
[27] J. Pietraszek, R. Dwornicka, M. Krawczyk and M. Kołomycki, The non-parametric approach to the quantification of the uncertainty in the design of experiments modelling, UNCECOMP 2017 – 2nd Int. Conf. Uncert. Quant. Comp. Sci. Eng. (2017) 598-604. https://doi.org/10.7712/120217.5395.17225
[28] J. Pietraszek, Fuzzy regression compared to classical experimental design in the case of flywheel assembly, Lecture Notes in Computer Science 7267 LNAI (2012) 310-317. https://doi.org/10.1007/978-3-642-29347-4_36
[29] J. Pietraszek, E. Skrzypczak-Pietraszek, The optimization of the technological process with the fuzzy regression, Adv. Mater. Res. 874 (2014) 151-155. https://doi.org/10.4028/www.scientific.net/AMR.874.151
[30] P. Wos, R. Dindorf and J. Takosoglu, Bricklaying robot lifting and levelling system, Communications – Scientific Letters of the University of Žilina 23 (2021) B257-B264. https://doi.org/10.26552/COM.C.2021.4.B257-B264
[31] A. Wronska, J. Andres, T. Altamer, A. Dudek and R. Ulewicz, Effect of tool pin length on microstructure and mechanical strength of the FSW joints of Al 7075 metal sheets, Communications – Scientific Letters of the University of Žilina 21 (2019) 40-47.
[32] I. Drach, A. Goroshko and R. Dwornicka, Design Principles of Horizontal Drum Machines with Low Vibration, Adv. Sci. Technol. Res. J. 15 (2021) 258-268. https://doi.org/10.12913/22998624/136441
[33] E. Augustyn, M.S. Kozien, Analytical solution of excited torsional vibrations of prismatic thin-walled beams, Journal of Theoretical and Applied Mechanics (Poland) 53 (2015) 991-1004. https://doi.org/10.15632/jtam-pl.53.4.991
[34] Ł. Łacny, M. Kozień and D. Ziemiański, Selected overview of the impact of ground motion on the vibrations of particle accelerators, AIP Conf. Proc. 2239 (2020) art. 20025. https://doi.org/10.1063/5.0008950
[35] A. Bąkowski, M. Kekez, L. Radziszewski and A. Sapietova, Vibroacoustic real time fuel classification in diesel engine, Archives of Acoustics 43 (2018) 385-395. https://doi.org/10.24425/123910
[36] A. Szczotok, R. Dwornicka, ICT development on the example of selected software applied in manufacturing area, MATEC Web of Conf. 183 (2018) -. https://doi.org/10.1051/matecconf/201818301010
[37] R. Ulewicz, M. Ulewicz, Problems in the Implementation of the Lean Concept in the Construction Industries, Lecture Notes in Civil Engineering 47 (2020) 495-500. https://doi.org/10.1007/978-3-030-27011-7_63
[38] R. Ulewicz, D. Kleszcz and M. Ulewicz, Implementation of Lean Instruments in Ceramics Industries, Management Systems in Production Engineering 29 (2021) 203-207. https://doi.org/10.2478/mspe-2021-0025
