–
Rope Tensioning System in a Large-Sized Horizontal Turntable
JASIŃSKI Wiesław, KRYSIAK Piotr, PARTYKA Jacek, OLSZEWSKI Dawid, WYSOCZAŃSKI Andrzej
Abstract. The study presents practical solutions for the design considerations of a rope tensioning system in a large horizontal turntable. The analyzed turntable is designed for rotating large-sized wheeled military vehicles such as the Jelcz 882 or KTO Rosomak, as well as tracked military vehicles such as the Leopard tank. The control of the rope tension force is illustrated using proprietary solutions for tensioning devices. Kinematic and dynamic analyses were performed using the “dynamic analysis” environment of the Autodesk Inventor Professional 2021 modelling software.
Keywords
Horizontal Turntable, Turntable Drive, Rope Tensioning, Drum Winding, Structure Optimization
Published online 10/20/2024, 8 pages
Copyright © 2024 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: JASIŃSKI Wiesław, KRYSIAK Piotr, PARTYKA Jacek, OLSZEWSKI Dawid, WYSOCZAŃSKI Andrzej, Rope Tensioning System in a Large-Sized Horizontal Turntable, Materials Research Proceedings, Vol. 45, pp 83-90, 2024
DOI: https://doi.org/10.21741/9781644903315-11
The article was published as article 11 of the book Terotechnology XIII
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] W. Jasiński, P. Krysiak and C. Pichlak, Static Mechanical Force Amplifier on the Example of a Fastener with an Electromagnetic Bolt, Mater. Res. Proc. 34 (2023) 246-251. https://doi.org/10.21741/9781644902691-29
[2] W. Jasiński, P. Krysiak, C. Pichlak and K. Ludian, Optimisation of a mobile device frame structure – practical aspects, Technical Transactions 119 (2022) art. e2022001. https://doi.org/10.37705/TechTrans/e2022001
[3] P. Kasza, P. Kulinowski, Laboratory tests of the dumping system in follow-up tensioning system, Mining Science 21 (2014) 33-38.
[4] G. Olszyna, A. Tytko and J. Tobys (2018), Eksploatacja lin prowadniczych i odbojowych, Napędy i Sterowanie 20 (2018) 110-114.
[5] J. Pluta, Elektrohydrauliczne systemy sterowania siłą napinania liny w kolejach napowietrznych, Transport Miejski i Regionalny 12 (2010) 16-20.
[6] A. Goroshko, V. Royzman and J. Pietraszek, Construction and practical application of hybrid statistically-determined models of multistage mechanical systems, Mechanika 20 (2014) 489-493. https://doi.org/10.5755/j01.mech.20.5.8221
[7] I. Drach, A. Goroshko and R. Dwornicka, Design Principles of Horizontal Drum Machines with Low Vibration, Adv. Sci. Technol. Res. J. 15 (2021) 258-268. https://doi.org/10.12913/22998624/136441
[8] Twaróg, B., The influence of the planned Solina-Jawor pumped storage power plant on the operating regime of the Solina-Myczkowce power plant, Technical Transactions 121 (2024) art. e2024003. https://doi.org/10.37705/TechTrans/e2024003
[9] M. Ulewicz, V. Zhelykh, Y. Furdas and K. Kozak, Assessment of the Economic Feasibility of Using Alternative Energy Sources in Ukraine, Lecture Notes in Civil Engineering 100 LNCE (2021) 482-489. https://doi.org/10.1007/978-3-030-57340-9_59
[10] S. Maleczek, M. Szczepaniak, N. Radek, S. Kowalkowski and K.A. Bogdanowicz, Tests of Acid Batteries for Hybrid Energy Storage and Buffering System—A Technical Approach, Energies 15 (2022) art. 3514. https://doi.org/10.3390/en15103514
[11] Ł.J. Orman, N. Radek, J. Pietraszek and D. Gontarski, Discussion of the heat flux calculation method during pool boiling on meshed heaters, System Safety: Human – Technical Facility – Environment 2 (2020) 247-252. https://doi.org/10.2478/czoto-2020-0030
[12] Ł.J. Orman, N. Radek, S. Honus and J. Pietraszek, Application of laser treatment technology for boiling heat transfer augmentation, Prod. Eng. Arch. 30 (2024) 259-265. https://doi.org/10.30657/pea.2024.30.25
[13] Ł.J. Orman, G. Majewski, N. Radek and J. Pietraszek, Analysis of Thermal Comfort in Intelligent and Traditional Buildings, Energies 15 (2022) art. 6522. https://doi.org/10.3390/en15186522
[14] Ł.J. Orman, N. Krawczyk, N. Radek, S. Honus, J. Pietraszek, L. Dębska, A. Dudek and A. Kalinowski, Comparative Analysis of Indoor Environmental Quality and Self-Reported Productivity in Intelligent and Traditional Buildings, Energies 16 (2023) art. 6663. https://doi.org/10.3390/en16186663
[15] R. Dwornicka, The impact of the power plant unit start-up scheme on the pollution load, Adv. Mater. Res. 874 (2014) 63-69. https://doi.org/10.4028/www.scientific.net/AMR.874.63
[16] P. Śliz, An analysis of the operation of the wastewater treatment plant in Nowy Sącz – tools for assessing the efficiency and reliability of operation, Technical Transactions 121 (2024) art. e2024004. https://doi.org/10.37705/TechTrans/e2024004
[17] A. Szczotok, J. Nawrocki and J. Pietraszek, The Impact of the Thickness of the Ceramic Shell Mould on the (γ + γ′) Eutectic in the IN713C Superalloy Airfoil Blade Casting, Arch. Metall. Mater. 62 (2017) 587-593. https://doi.org/10.1515/amm-2017-0087
[18] A. Szczotok, Assessment of the feasibility of determining the volume fraction and characteristics of the size, shape and distribution of γ’ phase precipitates in nickel-based superalloys, Technical Transactions 120 (2023) art. e2023011. https://doi.org/10.37705/TechTrans/e2023011
[19] A. Szczotok, N. Radek and R. Dwornicka, Effect of the induction hardening on microstructures of the selected steels, METAL 2018 – 27th Int. Conf. Metall. Mater., (2018) 1264-1269.
[20] D. Siwiec, R. Dwornicka and A. Pacana, Improving the process of achieving required microstructure and mechanical properties of 38MNVS6 steel, METAL 2020 – 29th Int. Conf. Metall. Mater., (2020) 591-596. https://doi.org/10.37904/metal.2020.3525
[21] P. Jonšta, Z. Jonšta, S. Brožová, M. Ingaldi, J. Pietraszek and D. Klimecka-Tatar, The effect of rare earth metals alloying on the internal quality of industrially produced heavy steel forgings, Materials 14 (2021) art. 5160. https://doi.org/10.3390/ma14185160
[22] A. Szewczyk-Nykiel, The influence of carbide reinforcement on the properties of sintered aluminium alloy matrix composites, Technical Transactions 120 (2023) art. e2023005. https://doi.org/10.37705/TechTrans/e2023005
[23] N. Radek, J. Pietraszek, Ł.J. Orman, M. Szczepaniak, J. Świderski, M. Radek and D. Gontarski, The effect of laser treatment on operational properties of ESD coatings, METAL 2021 – 30th Int. Conf. Metall. Mater., (2021) 876-882. https://doi.org/10.37904/metal.2021.4212
[24] N. Radek, A. Kalinowski, J. Pietraszek, J. Orman, M. Szczepaniak, A. Januszko, J. Kamiński, J. Bronček and O. Paraska, Formation of coatings with technologies using concentrated energy stream, Prod. Eng. Arch. 28 (2022) 117-122. https://doi.org/10.30657/pea.2022.28.13
[25] N. Radek, J. Pietraszek and Ł. Pasieczynski, Technology and application of anti-graffiti coating systems for rolling stock, METAL 2019 – 28th Int. Conf. Metall. Mater., (2019) 1127-1132.
[26] N. Radek, R. Dwornicka, Fire properties of intumescent coating systems for the rolling stock, Communications – Scientific Letters of the University of Žilina 22 (2020) 90-96. https://doi.org/10.26552/com.C.2020.4.90-96
[27] T. Lipiński, J. Pietraszek and A. Wach, Influence of oxygen content in medium carbon steel on bending fatigue strength, Engineering for Rural Development 21 (2022) 351-356. https://doi.org/10.22616/ERDev.2022.21.TF116
[28] N. Radek, J. Pietraszek, J. Bronček and P. Fabian, Properties of Steel Welded with CO2 Laser, Lecture Notes in Mechanical Engineering (2020) 571-580. https://doi.org/10.1007/978-3-030-33146-7_65
[29] M.T. Solarczyk, P. Piotrkowski and M. Niedostatkiewicz, Experimental tests of steel double-type balcony connections, Technical Transactions 121 (2024) art. e2024001. https://doi.org/10.37705/TechTrans/e2024001
[30] R. Ulewicz, Quality management system operation in the woodworking industry, The Path Forward for Wood Products: A Global Perspective – Proc. Sci. Papers (2016) 51-56.
[31] D. Siwiec, R. Dwornicka and A. Pacana, Improving the non-destructive test by initiating the quality management techniques on an example of the turbine nozzle outlet, Mater. Res. Proc. 17 (2020) 16-22. https://doi.org/10.21741/9781644901038-3
[32] A. Pacana, R. Ulewicz, Analysis of causes and effects of implementation of the quality management system compliant with iso 9001, Polish J. Manag. Stud. 21 (2020) 283-296. https://doi.org/10.17512/pjms.2020.21.1.21
[33] R. Dwornicka, J. Pietraszek, The outline of the expert system for the design of experiment, Prod. Eng. Arch. 20 (2018) 43-48. https://doi.org/10.30657/pea.2018.20.09
[34] J. Pietraszek, N. Radek and A.V. Goroshko, Challenges for the DOE methodology related to the introduction of Industry 4.0, Prod. Eng. Arch. 26 (2020) 190-194. https://doi.org/10.30657/pea.2020.26.33
[35] J. Pietraszek, A. Szczotok and E. Kocyłowska, Factorial approach to assessment of GPU computational efficiency in surrogate models, Adv. Mater. Res. 874 (2014) 157-162. https://doi.org/10.4028/www.scientific.net/AMR.874.157
[36] J. Pietraszek, M. Seńcio, J. Diakun, A. Gądek-Moszczak and M. Stojek, The parametric RSM model with higher order terms for the meat tumbler machine process, Solid State Phenom. 235 (2015) 37-44. https://doi.org/10.4028/www.scientific.net/SSP.235.37
[37] J. Pietraszek, N. Radek and K. Bartkowiak, Advanced statistical refinement of surface layer’s discretization in the case of electro-spark deposited carbide-ceramic coatings modified by a laser beam, Solid State Phenom. 197 (2013) 198-202. https://doi.org/10.4028/www.scientific.net/SSP.197.198
[38] J. Pietraszek, A. Gądek-Moszczak and T. Toruński, Modeling of errors counting system for PCB soldered in the wave soldering technology, Adv. Mater. Res. 874 (2014) 139-143. https://doi.org/10.4028/www.scientific.net/AMR.874.139
[39] J. Pietraszek, L. Wojnar, The bootstrap approach to the statistical significance of parameters in RSM model, ECCOMAS Congress 2016 – Proc. 7th Europ. Congr. Comp. Methods in Appl. Sci. Eng. 1 (2016) 2003-2009. https://doi.org/10.7712/100016.1937.9138
[40] J. Pietraszek, Fuzzy regression compared to classical experimental design in the case of flywheel assembly, Lecture Notes in Computer Science 7267 LNAI (2012) 310-317. https://doi.org/10.1007/978-3-642-29347-4_36
[41] J. Pietraszek, The modified sequential-binary approach for fuzzy operations on correlated assessments, Lecture Notes in Computer Science 7894 LNAI (2013) 353-364. https://doi.org/10.1007/978-3-642-38658-9_32
[42] A. Pacana, K. Czerwinska and R. Dwornicka, Analysis of quality control efficiency in the automotive industry, Transportation Research Procedia 55 (2021) 691-698. https://doi.org/10.1016/j.trpro.2021.07.037
[43] R. Ulewicz, M. Mazur, K. Knop and R. Dwornicka, Logistic controlling processes and quality issues in a cast iron foundry, Mater. Res. Proc. 17 (2020) 65-71. https://doi.org/10.21741/9781644901038-10
