Influence of deposition strategy on porosity in powder-feed directed energy deposition (DED)
DHOONOOAH Neha Devi, MOUSSAOUI Kamel, MONIES Frederic, RUBIO Walter, ZITOUNE Redouane
download PDFAbstract. Directed energy deposition (DED) is an additive manufacturing process which is increasingly being used for direct manufacturing, added function application and component repair of high-value metals and alloys that are otherwise hard to machine conventionally [1]. However, most commercially available toolpath generators are not comprehensive with regards to the deposition strategy and process parameters, emphasis usually being placed solely on the overlap of adjacent weld beads rather than including the interaction between the contour curves and infill pattern. This increases the probability of gap formation in the deposition pattern, and hence the rate of porosity in the part. This study focuses on the influence of varying bead overlap on the resulting bead geometry and surface roughness for Inconel 718 workpieces deposited using the DED process. The deposition strategy was devised using Python programming language, and the code found to be robust for both single- and multi-layer deposits.
Keywords
DED-Powder, Deposition Strategy, Automatic Toolpath Generation, Surface Roughness, Bearing Ratio Curve
Published online 4/24/2024, 9 pages
Copyright © 2024 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: DHOONOOAH Neha Devi, MOUSSAOUI Kamel, MONIES Frederic, RUBIO Walter, ZITOUNE Redouane, Influence of deposition strategy on porosity in powder-feed directed energy deposition (DED), Materials Research Proceedings, Vol. 41, pp 325-333, 2024
DOI: https://doi.org/10.21741/9781644903131-37
The article was published as article 37 of the book Material Forming
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Optomec, 2019. How 3D Metal Printing Saves Time and Lowers Costs: DED for Repair of Industrial Components [pdf] https://optomec.com/wp-content/uploads/2019/03/DEDWebinar-slides.pdf
[2] Ribeiro, K.S.B., Mariani, F.E., Coelho, R.T., 2020. A Study of Different Deposition Strategies in Direct Energy Deposition (DED) Processes. Procedia Manufacturing 48, 663–670. https://doi.org/10.1016/j.promfg.2020.05.158
[3] Sames, W. J., Medina, F., Peter, W. H., Babu, S. S., Dehoff, R. R., 2014. Effect of Process Control and Powder Quality on Inconel 718 Produced Using Electron Beam Melting. in Superalloy 718 and Derivatives, Pittsburgh, PA.
[4] Sames, W.J., List, F.A., Pannala, S., Dehoff, R.R., Babu, S.S., 2016. The metallurgy and processing science of metal additive manufacturing. International Materials Reviews 61, 315–360. https://doi.org/10.1080/09506608.2015.1116649
[5] Flores, J., Garmendia, I., Pujana, J., 2019. Toolpath generation for the manufacture of metallic components by means of the laser metal deposition technique. Int J Adv Manuf Technol 101, 2111–2120. https://doi.org/10.1007/s00170-018-3124-1
[6] Parimi, L., L., Ravi, G. A., Clark, D., Attallah, M.M., 2014. Microstructural and texture development in direct laser fabricated IN718. Materials Characterization 89:102-111
[7] Calleja, A., Tabernero, I., Fernández, A., Celaya, A., Lamikiz, A., López de Lacalle, L.N., 2014. Improvement of strategies and parameters for multi-axis laser cladding operations, Optics and Lasers in Engineering, Vol. 56, pp. 113-120, ISSN 0143-8166, https://doi.org/10.1016/j.optlaseng.2013.12.017
[8] Johnson, K. L., 1985. Contact Mechanics. Cambridge: Cambridge University Press. https://doi.org/10.1017/CBO9781139171731
