–
The experimental full-field method (EFFM) for parameter calibration applied on an anisotropic constitutive model
ILG Christian, SHETTY Mayank, KARADOGAN Celalettin, HAUFE André, LIEWALD Mathias
download PDFAbstract. Accurate characterization of material models is essential to ensure a higher prediction quality in Finite Element Analysis (FEA) under general loading conditions in sheet metal forming. Achieving accurate material model data frequently involves intricate inverse analysis techniques and numerous experimental tests. To overcome the complexities associated with calibration processes, the adoption of optical measuring systems like Digital Image Correlation (DIC) is widespread in material model calibration. The rich information obtained from DIC measurements is often used by material model calibration strategies to calibrate the values of material or model parameters, such as extrapolation of stress-strain curves or Lankford parameters that are not necessarily constant over the entire range of plastic deformation. This study presents the Experimental Full-Field Method (EFFM) as an innovative iterative approach for the calibration of material properties. As a special implementation of Finite Element Model Update (FEMU) [1], the EFFM uses the whole deformation field gained from DIC as boundary conditions [2]. This is then used in an inverse optimization procedure to determine parameters of complex material models. In this research, the EFFM is applied to an anisotropic constitutive model [3] to optimize three flow curves in 0°, 45° and 90° directions w.r.t. the rolling direction and the yield surface exponent, which reflects the polycrystal structure of the sheet material, to define the shape of the evolving yield locus in stress space. This is achieved by a modified tensile test specimen with L-shaped cut-outs which allows a distribution of higher strain values over a wider range of triaxiality values. With the direct use of the experimental deformation field in the FE simulation, displacements and strains are not any more objects of the optimization but only stresses. This also eliminates the step of mapping between experiments and simulations. Moreover, by using implicit time integration the inversion of the stiffness matrix becomes redundant, as positions of all nodes are already predetermined at each time step. These aspects make EFFM faster and more accurate than conventional FEMU.
Keywords
FEA, Parameter Identification, DIC, Optimization
Published online 4/24/2024, 9 pages
Copyright © 2024 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: ILG Christian, SHETTY Mayank, KARADOGAN Celalettin, HAUFE André, LIEWALD Mathias, The experimental full-field method (EFFM) for parameter calibration applied on an anisotropic constitutive model, Materials Research Proceedings, Vol. 41, pp 1150-1158, 2024
DOI: https://doi.org/10.21741/9781644903131-127
The article was published as article 127 of the book Material Forming
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] R. Mahnken, E. Stein, A unified approach for parameter identification of inelastic material models in the frame of the finite element method, J. Computer Methods in Applied Mechanics and Engineering 136, 1996, pp. 225-258. https://doi.org/10.1016/0045-7825(96)00991-7
[2] C. Ilg, C. Liebold, A. Haufe, V. Sreenivasa, C. Karadogan, M. Liewald, Displacement driven simulation and material calibration based on digital image correlation Part II – Application, IOP Conf. Ser.: Mater. Sci. Eng. 1284, 2023. https://doi.org/10.1088/1757-899X/1284/1/012056
[3] F. Andrade, T. Borrvall, P. DuBois, M. Feucht, A Hosford-based orthotropic plasticity model in LS-DYNA, 12th European LS-DYNA Users’ Conference, 2019
[4] S. Avril, M. Bonnet, A.-S. Bretelle, M. Grèdiac, F. Hild, P. Ienny, F. Latourte, D. Lemosse, S. Pagano, E. Pagnacco, F. Pierron, Overview of identification methods of mechanical parameters based on full-field measurements, Experimental Mechanics 48, 2008, pp. 381–402. https://doi.org/10.1007/s11340-008-9148-y
[5] Livermore Software Technology 2020 LS-DYNA Keyword User’s Manual vol 2 R12
[6] F. Barlat, K. Lian, Plastic behavior and stretchability of sheet metals. Part I: A yield function for orthotropic sheets under plane stress conditions, Int. J. Plasticity 5, 1989, pp. 51-56. https://doi.org/10.1016/0749-6419(89)90019-3
[7] C. Ilg, A. Haufe, K. Witowski, D. Koch, M. Liewald, Parameter identification using full-field calibration (FFC), IOP Conf. Ser.: Mater. Sci. Eng. 651, 2019, doi:10.1088/1757-899X/651/1/012070
[8] J.E. Hockett, O.D. Sherby, Large strain deformation of polycrystalline metals at low homologous temperatures, J. of the Mech. and Phys. of Solids 23, 1975, pp. 87-98. https://doi.org/10.1016/0022-5096(75)90018-6
[9] M. Gonçalves, M. G. Oliveira, S. Thuillier, A. Andrade-Campos, On the comparison of heterogeneous mechanical tests for sheet metal characterization, Materials Research Proc. 28, 2023, pp. 1121-1130. https://doi.org/10.21741/9781644902479-123
[10] B. Williams, C. Simha, On the design of novel multi-failure specimens for ductile failure testing, IOP Conf. Ser.: Mater. Sci. Eng. 651, 2019, https://doi.org/10.1088/1757-899X/651/1/012091
[11] C. Ilg, A. Haufe, V. Sreenivasa, C. Karadogan, M. Liewald, Parameter identification applying full-field calibration (FFC) techniques, Proc. of the 14th Int. Conf. on the Techn. of Plast., 2023, pp. 578-585. https://doi.org/10.1007/978-3-031-42093-1_55
[12] C. Liebold, C. Ilg, A. Haufe, T. Usta, V. Sreenivasa, Displacement based simulation and material calibration based on digital image correlation Part I – Theory, IOP Conf. Ser.: Mater. Sci. Eng. 1284, 2023, https://doi.org/10.1088/1757-899X/1284/1/012053
[13] P. Böhringer, D. Sommer, T. Haase, M. Barteczko, J. Sprave, M. Stoll, C. Karadogan, D. Koch, P. Middendorf, M. Liewald, A strategy to train machine learning material models for finite element simulations on data acquirable from physical experiments, Comp. Meth. in Applied Mech. and Eng. 406, 2023, https://doi.org/10.1016/j.cma.2023.115894