Preliminary study on the impact of thermal processing on the performances of parts obtained by fused deposition modeling (FDM)

Preliminary study on the impact of thermal processing on the performances of parts obtained by fused deposition modeling (FDM)

LORENZONI Margaux, ODENT Jérémy, RIVIÈRE-LORPHÈVRE Édouard, SPITAELS Laurent, HOMRANI Mohamed Khalil, DUCOBU François

download PDF

Abstract. Additive Manufacturing (AM) allows to build complex geometries while generating less waste than conventional processes such as machining. However, in AM processes such as Material Extrusion (MEX), workpieces tend to have low mechanical properties, low dimensional accuracy as well as rough surfaces. Indeed, several pre-processing and post-processing techniques exist to attempt to control these concerns. One post-processing method, namely thermal annealing, is already widely used with metallic parts. However, the influence of this technique has yet to be tested on mechanical properties such as tensile properties, dimensions, and surface roughness for polymer parts obtained by MEX and, particularly, by Fused Deposition Modelling (FDM). This paper aims to determine the relevance of using thermal annealing as a post-process to enhance FDM-obtained parts tensile properties while keeping in mind their dimensional and surface roughness aspects.

Keywords
Additive Manufacturing, Thermal Annealing, Tensile Test, Dimensions, Roughness

Published online 4/24/2024, 10 pages
Copyright © 2024 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: LORENZONI Margaux, ODENT Jérémy, RIVIÈRE-LORPHÈVRE Édouard, SPITAELS Laurent, HOMRANI Mohamed Khalil, DUCOBU François, Preliminary study on the impact of thermal processing on the performances of parts obtained by fused deposition modeling (FDM), Materials Research Proceedings, Vol. 41, pp 100-109, 2024

DOI: https://doi.org/10.21741/9781644903131-11

The article was published as article 11 of the book Material Forming

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] E. Pei et al., Eds., Springer Handbook of Additive Manufacturing. in Springer Handbooks. Cham: Springer International Publishing, 2023. https://doi.org/10.1007/978-3-031-20752-5
[2] S. L. Rodríguez-Reyna, C. Mata, J. H. Díaz-Aguilera, H. R. Acevedo-Parra, and F. Tapia, “Mechanical properties optimization for PLA, ABS and Nylon + CF manufactured by 3D FDM printing,” Mater. Today Commun., vol. 33, p. 104774, Dec. 2022. https://doi.org/10.1016/j.mtcomm.2022.104774
[3] A. García-Domínguez, J. Claver, A. M. Camacho, and M. A. Sebastián, “Considerations on the Applicability of Test Methods for Mechanical Characterization of Materials Manufactured by FDM,” Materials, vol. 13, no. 1, Art. no. 1, Jan. 2020. https://doi.org/10.3390/ma13010028
[4] C. Oliveira, J. Rocha, and J. E. Ribeiro, “Mechanical and Physical Characterization of Parts Manufactured by 3D Printing,” in Materials Design and Applications IV, L. F. M. da Silva, Ed., in Advanced Structured Materials. , Cham: Springer International Publishing, 2023, pp. 77–88. https://doi.org/10.1007/978-3-031-18130-6_6
[5] R. V. Pazhamannil, J. N. V. N., G. P., and A. Edacherian, “Property enhancement approaches of fused filament fabrication technology: A review,” Polym. Eng. Sci., vol. 62, no. 5, pp. 1356–1376, 2022. https://doi.org/10.1002/pen.25948
[6] M. Behzadnasab, A. A. Yousefi, D. Ebrahimibagha, and F. Nasiri, “Effects of processing conditions on mechanical properties of PLA printed parts,” Rapid Prototyp. J., vol. 26, no. 2, pp. 381–389, Jan. 2019. https://doi.org/10.1108/RPJ-02-2019-0048
[7] W. Jo, O.-C. Kwon, and M.-W. Moon, “Investigation of influence of heat treatment on mechanical strength of FDM printed 3D objects,” Rapid Prototyp. J., vol. 24, no. 3, pp. 637–644, Jan. 2018. https://doi.org/10.1108/RPJ-06-2017-0131
[8] K. R. Hart, R. M. Dunn, and E. D. Wetzel, “Increased fracture toughness of additively manufactured semi-crystalline thermoplastics via thermal annealing,” Polymer, vol. 211, p. 123091, Dec. 2020. https://doi.org/10.1016/j.polymer.2020.123091
[9] R. A. Wach, P. Wolszczak, and A. Adamus-Wlodarczyk, “Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing,” Macromol. Mater. Eng., vol. 303, no. 9, p. 1800169, 2018. https://doi.org/10.1002/mame.201800169
[10] V. Slavković, N. Grujović, A. Disic, and A. Radovanović, Influence of Annealing and Printing Directions on Mechanical Properties of PLA Shape Memory Polymer Produced by Fused Deposition Modeling. 2017.
[11] W. Yu, X. Wang, X. Yin, E. Ferraris, and J. Zhang, “The effects of thermal annealing on the performance of material extrusion 3D printed polymer parts,” Mater. Des., vol. 226, p. 111687, Feb. 2023. https://doi.org/10.1016/j.matdes.2023.111687
[12] J. Torres, J. Cotelo, J. Karl, and A. P. Gordon, “Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives,” JOM, vol. 67, no. 5, pp. 1183–1193, May 2015. https://doi.org/10.1007/s11837-015-1367-y
[13] R. Rane, A. Kulkarni, H. Prajapati, R. Taylor, A. Jain, and V. Chen, “Post-Process Effects of Isothermal Annealing and Initially Applied Static Uniaxial Loading on the Ultimate Tensile Strength of Fused Filament Fabrication Parts,” Materials, vol. 13, p. 352, Jan. 2020. https://doi.org/10.3390/ma13020352
[14] K. R. Hart, R. M. Dunn, J. M. Sietins, C. M. Hofmeister Mock, M. E. Mackay, and E. D. Wetzel, “Increased fracture toughness of additively manufactured amorphous thermoplastics via thermal annealing,” Polymer, vol. 144, pp. 192–204, May 2018. https://doi.org/10.1016/j.polymer.2018.04.024
[15] J. Butt and R. Bhaskar, “Investigating the Effects of Annealing on the Mechanical Properties of FFF-Printed Thermoplastics,” J. Manuf. Mater. Process., vol. 4, no. 2, Art. no. 2, Jun. 2020. https://doi.org/10.3390/jmmp4020038
[16] International Organization for Standardization, “Geometrical Product Specifications (GPS) – Surface texture : Profile method – Rules and procedures for the assessment of surface texture.” 1997.
[17] D20 Committee, “Test Method for Tensile Properties of Plastics.” ASTM International. https://doi.org/10.1520/D0638-14
[18] International Organization for Standardization, “General tolerances – Part 1 : Tolerances for linear and angular dimensions without individual tolerance indications.” Nov. 15, 1989.
[19] International Organization for Standardization, “Geometrical Product Specifications (GPS) – Indication of surface texture in technical product documentation.” Feb. 2002.