An Importance of the Roof of the Toyota House Factors in the Food Industry
MIELCZAREK Krzysztof
download PDFAbstract. The article presents a case study of the practical use of BOST surveys to identify the most important areas in the functioning of enterprise in perception of the company mission by their employees. This is an important element in the consciousness of the worker and is part of the delegation and self-organization to the lowest level. The research object is company from food industry. Some production workers of the company with the help of BOST questionnaire survey showed, which factors are the most important. Based on the survey results of carried out on the population of production workers, a series of importance areas for improvement was formulated. The aim of the analysis is to present which factors are the most important by building the significance sequences of obtained results. The results obtained for the type of small and medium-sized enterprises overlap with the results of tests verified in other enterprises.
Keywords
BOST Method, Toyotarity, Statistical Analysis, Production Management
Published online 9/1/2023, 10 pages
Copyright © 2023 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: MIELCZAREK Krzysztof, An Importance of the Roof of the Toyota House Factors in the Food Industry, Materials Research Proceedings, Vol. 34, pp 252-261, 2023
DOI: https://doi.org/10.21741/9781644902691-30
The article was published as article 30 of the book Quality Production Improvement and System Safety
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] S. Gao, S.P. Low. Toyota way style human resource management in large Chinese construction firms, A qualitative study, Int. J. Constr. Manag. 15 (2015) 17-32. https://doi.org/10.1080/15623599.2015.1012139
[2] S. Borkowski. Scientific Potential of Toyotarity and BOST Method, Polish Quality Institute, Warszawa, 2016.
[3] S. Borkowski. BOST Method as the Instrument of Assessment Process Functioning according to Toyota Principles, University of Maribor, Maribor, 2012.
[4] K. Knop. Indicating and analysis the interrelation between terms – visual: management, control, inspection and testing, Prod. Eng. Arch. 26 (2020) 110-120. https://doi.org/10.30657/pea.2020.26.22
[5] K. Knop. Importance of visual management in metal and automotive branch and its influence in building a competitive advantage, Pol. J. Manag. Stud. 22 (2020) 263-278. https://doi.org/10.17512/pjms.2020.22.1.17
[6] J.K. Liker, J. Franz. The Toyota Way to continuous improvement, McGraw Hill, New York, 2011. ISBN 978-0071477468
[7] M. Matuszny. Building decision trees based on production knowledge as support in decision-making process, Prod. Eng. Arch. 26 (2020) 36-40. https://doi.org/10.30657/pea.2020.26.08
[8] K. Knop. Statistical Control of the Production Process of Rolled Products, Prod. Eng. Arch. 20 (2018) 26-31. https://doi.org/10.30657/pea.2018.20.06
[9] M. Krynke. Risk Management in the Process of Personnel Allocation to Jobs, System Safety: Human-Technical Facility-Environment (2020) 82-90. https://doi.org/10.2478/czoto-2020-0011
[10] M. Ingaldi. A new approach to quality management: conceptual matrix of service attributes, Pol. J. Manag. Stud. 22 (2020) 187-200. https://doi.org/10.17512/pjms.2020.22.2.13
[11] D. Klimecka-Tatar. Context of production engineering in management model of Value Stream Flow according to manufacturing industry, Prod. Eng. Arch. 21 (2018) 32-35. https://doi.org/10.30657/pea.2018.21.07
[12] M. Krynke et al. Cost Optimization and Risk Minimization During Teamwork Organization, Manag. Sys. Prod. Eng. 29 (2021) 145-150. https://doi.org/10.2478/mspe-2021-0019
[13] J. Selejdak. Use of the Toyota Management Principles for Evaluation of the Company’s Mission, Prod. Eng. Arch. 1 (2013) 13-15. https://doi.org/10.30657/pea.2013.01.04
[14] K. Knop, K. Mielczarek. Assessment of Production Processes Functioning in the Case of Air Bag Production, MATEC Web Conf. 183 (2018) art.04009. https://doi.org/10.1051/matecconf/201818304009
[15] T. Lipiński, R. Ulewicz. The effect of the impurities spaces on the quality of structural steel working at variable loads, Open Eng. 11 (2021) 233-238. https://doi.org/10.1515/eng-2021-0024
[16] M. Mazur et al. The structure and mechanical properties of domex 700 MC steel, Comm. – Sci. Lett. Univ. Žilina 15 (2013) 54-57. https://doi.org/10.26552/com.C.2013.4.54-57
[17] R. Ulewicz et al. Structure and mechanical properties of fine-grained steels, Period. Polytech. Transp. Eng. 41 (2013) 111-115. https://doi.org/10.3311/PPtr.7110
[18] P. Jonšta et al. The effect of rare earth metals alloying on the internal quality of industrially produced heavy steel forgings, Materials 14 (2021) art.5160. https://doi.org/10.3390/ma14185160
[19] A. Dudek et al. The effect of alloying method on the structure and properties of sintered stainless steel, Archives of Metallurgy and Materials 62 (2017) 281-287. https://doi.org/10.1515/amm-2017-0042
[20] N. Radek et al. Technology and application of anti-graffiti coating systems for rolling stock, METAL 2019 – 28th Int. Conf. Metall. Mater. (2019) 1127-1132. ISBN 978-8087294925
[21] N. Radek et al. Formation of coatings with technologies using concentrated energy stream, Prod. Eng. Arch. 28 (2022) 117-122. https://doi.org/10.30657/pea.2022.28.13
[22] N. Radek et al. Microstructure and tribological properties of DLC coatings, Mater. Res. Proc. 17 (2020) 171-176. https://doi.org/10.21741/9781644901038-26
[23] N. Radek et al. The influence of plasma cutting parameters on the geometric structure of cut surfaces, Mater. Res. Proc. 17 (2020) 132-137. https://doi.org/10.21741/9781644901038-20
[24] W. Przybył et al. Microwave absorption properties of carbonyl iron-based paint coatings for military applications, Def. Technol. 22 (2023) 1-9. https://doi.org/10.1016/j.dt.2022.06.013
[25] N. Radek et al. The impact of laser welding parameters on the mechanical properties of the weld, AIP Conf. Proc. 2017 (2018) art.20025. https://doi.org/10.1063/1.5056288
[26] A. Bakowski et al. Frequency analysis of urban traffic noise, ICCC 2019 20th Int. Carpathian Contr. Conf. (2019) 1660-1670. https://doi.org/10.1109/CarpathianCC.2019.8766012
[27] J.M. Djoković et al. Selection of the Optimal Window Type and Orientation for the Two Cities in Serbia and One in Slovakia, Energies 15 (2022) art.323. https://doi.org/10.3390/en15010323
[28] L. Cedro. Model parameter on-line identification with nonlinear parametrization – manipulator model, Technical Transactions 119 (2022) art. e2022007. https://doi.org/10.37705/TechTrans/e2022007
[29] J. Pietraszek, E. Skrzypczak-Pietraszek. The uncertainty and robustness of the principal component analysis as a tool for the dimensionality reduction. Solid State Phenom. 235 (2015) 1-8. https://doi.org/10.4028/www.scientific.net/SSP.235.1
[30] J. Pietraszek et al. The parametric RSM model with higher order terms for the meat tumbler machine process, Solid State Phenom. 235 (2015) 37-44. https://doi.org/10.4028/www.scientific.net/SSP.235.37
[31] R. Dwornicka, J. Pietraszek. The outline of the expert system for the design of experiment, Prod. Eng. Arch. 20 (2018) 43-48. https://doi.org/10.30657/pea.2018.20.09
[32] J. Pietraszek et al. Challenges for the DOE methodology related to the introduction of Industry 4.0. Prod. Eng. Arch. 26 (2020) 190-194. https://doi.org/10.30657/pea.2020.26.33
[33] J. Pietraszek. Fuzzy regression compared to classical experimental design in the case of flywheel assembly, LNAI 7267 LNAI (2012) 310-317. https://doi.org/10.1007/978 3 642 29347 4_36
[34] J. Pietraszek. The modified sequential-binary approach for fuzzy operations on correlated assessments, LNAI 7894 (2013) 353-364. https://doi.org/10.1007/978-3-642-38658-9_32
[35] J. Pietraszek et al. The fuzzy approach to assessment of ANOVA results, LNAI 9875 (2016) 260-268. https://doi.org/10.1007/978-3-319-45243-2_24
[36] J. Pietraszek, L. Wojnar. The bootstrap approach to the statistical significance of parameters in RSM model, ECCOMAS Congress 2016 Proc. 7th Europ. Congr. Comput. Methods in Appl. Sci. Eng. 1 (2016) 2003-2009. https://doi.org/10.7712/100016.1937.9138
