FEM simulation of dynamic recrystallization during asymmetric hot rolling of high-speed steel M2
Alexander Pesin, Denis Pustovoytov, Ilya Pesin, Hailiang Yu, Puneet Tandon, Harshal Y Shahare, Abhay Kumar Dubey, Leonid Nosov
download PDFAbstract. Dynamic recrystallization of high-speed steel (HSS) M2 occurs through a discontinuous mechanism, involving nucleation and growth of strain-free grains. The initiation and completion of discontinuous dynamic recrystallization (dDRX) must be carried out in a single rolling pass. The time for 99% dDRX depends on the critical strain, strain rate and equivalent strain, that generated in the workpiece material in a single rolling pass. The level of equivalent strain plays a key role in terms of the possibility to complete dDRX. High equivalent strain in conventional hot rolling for a single pass is limited by too high rolling forces. High equivalent strain at low rolling forces can be achieved by asymmetric hot rolling. Asymmetric rolling is a process based on purposefully created differences in the circumferential speeds of the work rolls. For such a process, a degree of asymmetry is defined by a speed ratio of the work rolls. The speed ratio is one of the most important parameters of the process, affecting the level of equivalent strain and the rolling force. In this work the single-pass asymmetric hot rolling process of HSS M2 at different temperatures in the range 850-1150 °C was simulated by FEM and JMAK model. The effects of speed ratio and thickness reduction on equivalent strain and rolling force were investigated. The effects of equivalent strain, strain rate and temperature on the recrystallized volume fraction and the average size of a dynamically recrystallized grains of HSS M2 are presented. Symmetric and asymmetric hot rolling processes are compared.
Keywords
High-Speed Steel, Dynamic Recrystallization, Asymmetric Hot Rolling, FEM, JMAK
Published online , 9 pages
Copyright © 2023 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Alexander Pesin, Denis Pustovoytov, Ilya Pesin, Hailiang Yu, Puneet Tandon, Harshal Y Shahare, Abhay Kumar Dubey, Leonid Nosov, FEM simulation of dynamic recrystallization during asymmetric hot rolling of high-speed steel M2, Materials Research Proceedings, Vol. 32, pp 294-302, 2023
DOI: https://doi.org/10.21741/9781644902615-34
The article was published as article 34 of the book Superplasticity in Advanced Materials
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] J.J. Jonas, Dynamic recrystallization – scientific curiosity or industrial tool? Mater. Sci. Eng. A 184 (1994) 155-165. https://doi.org/10.1016/0921-5093(94)91028-6
[2] K. Huang, R.E. Logé, A review of dynamic recrystallization phenomena in metallic materials, Materials & Design 111 (2016) 548-574. https://doi.org/10.1016/j.matdes.2016.09.012
[3] H.J. McQueen, Development of dynamic recrystallization theory, Mater. Sci. Eng. A 387-389 (2004) 203-208. https://doi.org/10.1016/j.msea.2004.01.064
[4] C.A.C. Imbert, H.J. McQueen, Dynamic recrystallization of A2 and M2 tool steels, Mater. Sci. Eng. A 313 (2001) 104-116. https://doi.org/10.1016/S0921-5093(01)00974-1
[5] A. Dehghan-Manshadi, M.R. Barnett, P.D. Hodgson, Hot deformation and recrystallization of austenitic stainless steel: part I. dynamic recrystallization, Metall. Mater. Trans. A. 39 (2008) 1359-1370. https://doi.org/10.1007/s11661-008-9512-7
[6] S.H. Cho, K.B. Kang, J.J. Jonas, Dynamic, static and metadynamic recrystallization of a Nb-microalloyed steel, ISIJ Int. 41 (2001) 63-69. https://doi.org/10.2355/isijinternational.41.63
[7] S.S. Dhinwal, C. Ernould, B. Beausir, Facilitating the occurrence of dynamic recrystallization in plain extra low-carbon steel by warm asymmetric rolling, Materials Characterization 189 (2022) 111942. https://doi.org/10.1016/j.matchar.2022.111942
[8] R. Milovic, D. Manojlovic, M. Andjelic, D. Drobnjak, Hot workability of M2 type high-speed steel, Steel research 63 (1992) 78-84. https://doi.org/10.1002/srin.199200474
[9] D. Pustovoytov, A. Pesin, P. Tandon, Asymmetric (hot, warm, cold, cryo) rolling of light alloys: a review, Metals 11 (2021) 956. https://doi.org/10.3390/met11060956
[10] G. Vincze, F.J.P. Simões, M.C. Butuc, Asymmetrical rolling of aluminum alloys and steels: a review, Metals (2020) 10, 1126. https://doi.org/10.3390/met10091126
[11] C. Imbert, N.D. Ryan, H.J. McQueen Hot workability of three grades of tool steel, Metallurgical Transactions A 15 (1984) 1855-1864. https://doi.org/10.1007/BF02664899
[12] C. Imbert, H.J. McQueen, Hot Ductility of Tool Steels, Canadian Metallurgical Quarterly 40 (2001). 235-244. https://doi.org/10.1179/000844301794388461
[13] C. Imbert, H.J. McQueen, Peak strength, strain hardening and dynamic restoration of A2 and M2 tool steels in hot deformation, Mater. Sci. Eng. A 313 (2001) 88-103. https://doi.org/10.1016/S0921-5093(01)00976-5
