Deformation analysis of ZnMgAl coated steel sheet using digital image correlation (DIC) system

Deformation analysis of ZnMgAl coated steel sheet using digital image correlation (DIC) system

LISIECKA – GRACA Paulina, MUSZKA Krzysztof, KWIECIEŃ Marcin, DZIURDZIA Jakub

Abstract. Protective metallic coatings may be applied to the finished tubes and pipes using the hot dip method or may be applied to cold rolled sheet that is then used in the roll forming process of tubes manufacturing. In the latter case applied coating must ensure the proper adhesion and lack of cracks during deformation. In this work, the main objective is to assess the plastic deformability of steel sheets covered with an advanced ZnMgAl coating. The assessment of the susceptibility of the ZnMgAl coatings to plastic deformation was carried out using three-point bending tests, supported by the digital image correlation technique. A standard bending test of a steel sheet with a ZnMgAl coating at different bending angles was also used. The comparison of the results of the tests carried out allowed for the formulation of conclusions for direct use in industrial practice.

Keywords
Digital Image Correlation (DIC), ZnMgAl Coating, Tubular Products

Published online 4/19/2023, 8 pages
Copyright © 2023 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: LISIECKA – GRACA Paulina, MUSZKA Krzysztof, KWIECIEŃ Marcin, DZIURDZIA Jakub, Deformation analysis of ZnMgAl coated steel sheet using digital image correlation (DIC) system, Materials Research Proceedings, Vol. 28, pp 817-824, 2023

DOI: https://doi.org/10.21741/9781644902479-89

The article was published as article 89 of the book Material Forming

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] P. H. Chan, K. Y. Tshai, M. Johnson, S. Li, The flexural properties of composite repaired pipeline: Numerical simulation and experimental validation, Compos. Struct. 133 (2015) 312-321. https://doi.org/10.1016/j.compstruct.2015.07.066
[2] A. Masoud, S. Bekir, K.J. Bart, P. Yutao, Cracking behavior and formability of Zn-Al-Mg coatings, Mater. Des. 212 (2021) 1-15. https://doi.org/10.1016/j.matdes.2021.110215
[3] S.M.A. Shibli, B.N. Meena, R. Remya, A review on recent approaches in the field of hot dip zinc galvanizing process, Surf. Coat. Technol. 262 (2015) 210-215. https://doi.org/10.1016/j.surfcoat.2014.12.054
[4] S.T. Vagge, V.S. Raja, R. Ganesh Narayanan, Effect of deformation on the electrochemical behavior of hot-dip galvanized steel sheets, Appl. Surf. Sci. 253 (2007) 8415-8421. https://doi.org/10.1016/j.apsusc.2007.04.045
[5] C. Yao, H. Lv, T. Zhu, W. Zheng, X. Yuan, W. Gao. Effect of Mg content on microstructure and corrosion behavior of hot dipped Zn-Al-Mg coatings, J. Alloy. Compd. 670 (2016) 239-248. https://doi.org/10.1016/j.jallcom.2016.02.026
[6] S. Thomas, N. Birbilis, M.S. Venkatraman, I.S. Coles, Self-repairing oxides to protect zinc: Review, discussion and prospects, Corros. Sci. 69 (2013) 11-22. https://doi.org/10.1016/j.corsci.2013.01.011
[7] B. Gao, S.W. Li, Y. Hao, G.F. Tu, L. Hu, S.H. Yin, The Corrosion Mechanism of Zn-5% Al-0.3% Mg Coating, Adv. Mat. Res. 189 (2011) 1284-1287. https://doi.org/10.4028/www.scientific.net/AMR.189-193.1284
[8] T.C. Chu, W.F. Ranson, M.A. Sutton, Applications of digital-image-correlation techniques to experimental mechanics, Exp. Mech. 25 (1985) 232. https://doi.org/10.1007/BF02325092.
[9] T. He, L. Liu, A. Makeev, B. Shonkwiler, Characterization of stress–strain behavior of composites using digital image correlation and finite element analysis, Compos. Struct. 140 (2016) 84. https://doi.org/10.1016/j.compstruct.2015.12.018