Numerical and experimental study of high-speed blanking of DC06 steel

Numerical and experimental study of high-speed blanking of DC06 steel

E. Galiev, S. Winter, M. Linnemann, L. Winter, V. Psyk, V. Kräusel

Abstract. In high-speed forming processes, such as electromagnetic forming or adiabatic blanking, the yield stress of the material is influenced by two opposing effects: deformation hardening and thermal softening due to adiabatic heating. In most cases, it is difficult to determine the temperature in the deformation zone in the process, due to closed tools. In this study, the tool for high-speed blanking was modified to access the measuring technique to enable recording the temperature in the deformation zone of a 3 mm thick DC06 steel with a high-speed pyrometer. The experimental results validated numerical calculations in LS-DYNA using the strain rate-dependent plastic model and the GISSMO material damage model. The reached temperatures in the shear zone ranged from 225 °C in case of a cutting punch velocity of 6.15 m/s) to 345 °C in case of a cutting punch velocity of 9.64 m/s. Thus, the study shows that the used numerical model and the damage model have a great potential for the simulation of high-speed blanking processes.

Keywords
Simulation, Blanking, High-Speed Impact Cutting

Published online 3/17/2023, 8 pages
Copyright © 2023 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: E. Galiev, S. Winter, M. Linnemann, L. Winter, V. Psyk, V. Kräusel, Numerical and experimental study of high-speed blanking of DC06 steel, Materials Research Proceedings, Vol. 25, pp 27-34, 2023

DOI: https://doi.org/10.21741/9781644902417-4

The article was published as article 4 of the book Sheet Metal 2023

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] S.F. Golovashchenko, N. Wang, Q. Le, Trimming and sheared edge stretchability of automotive 6xxx aluminum alloys, J. Mater. Process. Technol. 264 (2019), pp. 64–75. https://doi.org/10.1016/j.jmatprotec.2018.09.001
[2] M.-L. Li, D.-S. Bi, J.-K. Hao, Automotive sheet metal SAPH440 and Q235 formability of comparative study, 2015 International Conference on Material Science and Applications (icmsa-15) : Atlantis Press, pp. 1027–1030
[3] K. Sugimoto, T. Hojo, A.K. Srivastava, Low and medium carbon advanced high-strength forging steels for automotive applications. Metals 9 (2019), Nr. 12, pp. 1263. https://doi.org/10.3390/met9121263
[4] A.K. Perka, M. John, U.B. Kuruveri, P.L. Menezes, Advanced High-Strength Steels for Automotive Applications: Arc and Laser Welding Process, Properties, and Challenges, In: Metals 12 (2022), Nr. 6, pp. 1051. https://doi.org/10.3390/met12061051
[5] S. Winter, M. Nestler, E. Galiev, F. Hartmann, V. Psyk, V. Kräusel, M. Dix, Adiabatic Blanking: Influence of Clearance, Impact Energy, and Velocity on the Blanked Surface, J. Manuf. Mater. Process. 5 (2021), Nr. 2, pp. 35. https://doi.org/10.3390/jmmp5020035
[6] F. Schmitz, S. Winter, T. Clausmeyer, M.F.-X. Wagner, A. E. Tekkaya, Adiabatic blanking of advanced high-strength steels, CIRP Ann. 69 (2020), Nr. 1, pp. 269–272. https://doi.org/10.1016/j.cirp.2020.03.007
[7] D.M. Neto, J.R. Barros, M.C. Oliveira, P.V. Antunes, A. Ramalho, R.L. Amaral, A.D. Santos, J.L. Alves, L.F. Menezes, Heat generation when forming AHSS: experimental and numerical analysis of tensile and draw-bead tests. IOP Conference Series: Materials Science and Engineering 967 (2020), Nr. 1, pp. 12086. https://doi.org/10.1088/1757-899X/967/1/012086
[8] P. Knysh, Y. P. Korkolis, Determination of the fraction of plastic work converted into heat in metals, Mech. Mater. 86 (2015), Nr. 3, pp. 71–80. https://doi.org/10.1016/j.mechmat.2015.03.006
[9] N. Abedrabbo, F. Pourboghrat, J. Carsley, John, Forming of AA5182-O and AA5754-O at elevated temperatures using coupled thermo-mechanical finite element models, Int. J. Plast. 23 (2007), Nr. 5, pp. 841–875. https://doi.org/10.1016/j.ijplas.2006.10.005
[10] F. Andrade, M. Feucht (Eds.): A comparison of damage and failure models for the failure prediction of dual-phase steels, 2017
[11] E. Galiev, S. Winter, F. Reuther, V. Psyk, M. Tulke, A. Brosius, V. Kräusel, Local Temperature Development in the Fracture Zone during Uniaxial Tensile Testing at High Strain Rate: Experimental and Numerical Investigations, Appl. Sci. 12 (2022), Nr. 5, pp. 2299. https://doi.org/10.3390/app12052299
[12] M. Feucht, F. Neukamm, A. Haufe, A phenomenological damage model to predict material failure in crashworthiness applications. Recent developments and innovative applications in computational mechanics: Springer, 2011, pp 143–153. https://doi.org/10.1007/978-3-642-17484-1_17
[13] V. Psyk, C. Scheffler, M. Tulke, S. Winter, C. Guilleaume, A. Brosius, Determination of Material and Failure Characteristics for High-Speed Forming via High-Speed Testing and Inverse Numerical Simulation, J. Manuf. Mater. Process. 4 (2020), Nr. 2, pp. 31. https://doi.org/10.3390/jmmp4020031
[14] G.I. Taylor, H. Quinney, The latent energy remaining in a metal after cold working. In: Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character 143 (1934), Nr. 849, pp. 307–326. https://doi.org/10.1098/rspa.1934.0004
[15] C.K.C. Lieou, C.A. Bronkhorst, Thermomechanical conversion in metals: dislocation plasticity model evaluation of the Taylor-Quinney coefficient, Acta Mater. 202 (2021), Nr. 849, pp. 170–180. https://doi.org/10.1016/j.actamat.2020.10.037