Recent Trends in Surface Cladding on AISI 1045 Steel Substrate: A Review

Recent Trends in Surface Cladding on AISI 1045 Steel Substrate: A Review

Md Sarfaraz Alam, Anil Kumar Das

Abstract. This paper gives the informative review and enlighten the important characteristics and development of different cladding techniques applied on AISI 1045 medium carbon steel substrate material. The paper focuses on the cladding methods used on AISI 1045 steel follows the way of surfacing via fusion. The cladding practice like wire feed, powder blown are taken into consideration. Different cladding methods such as Tungsten Inert Gas (TIG) Arc cladding, thermal spraying, laser cladding and electron beam cladding has been compared for better understanding. The application of various cladding powders by TIG cladding technique on AISI 1045 steel substrate material is presented by exhaustive critical review of various research papers of the era. The importance of TIG cladding process has been discussed.

Keywords
AISI 1045 Steel, TIG Cladding, Laser Cladding, Electron Beam Cladding, Thermal Spraying, Coating

Published online 3/25/2022, 8 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Md Sarfaraz Alam, Anil Kumar Das, Recent Trends in Surface Cladding on AISI 1045 Steel Substrate: A Review, Materials Research Proceedings, Vol. 22, pp 94-101, 2022

DOI: https://doi.org/10.21741/9781644901878-13

The article was published as article 13 of the book Functional Materials and Applied Physics

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] S. Ariely, J. Shen, M. Bamberger, F. Dausiger and H. Hugel, Laser surface alloying of steel with TiC. Surface and Coatings Technology, 45 (1991) 403-408. https://doi.org/10.1016/0257-8972(91)90249-V
[2] Shengfeng Zhou, Jianbo Lei, Xiaoqin Dai, Jinbo Guo, Zhenjie Gu, Hongbo Panc, A comparative study of the structure and wear resistance of NiCrBSi/50 wt.% WC composite coatings by laser cladding and laser induction hybrid cladding. Int. Journal of Refractory Metals and Hard Materials, 60 (2016) 17–27. https://doi.org/10.1016/j.ijrmhm.2016.06.019
[3] X.H. Wang, M. Zhang, Z.D. Zou, S.L. Song, F. Hanc, S.Y. Qu, In situ production of Fe–TiC surface composite coatings by tungsten-inert gas heat source Surface & Coatings Technology 200 (2006) 6117–6122. https://doi.org/10.1016/j.surfcoat.2005.09.021
[4] Jing Liu, Jian Zhang, Pengchuan Liu, Lijun Deng & Sen Zhang, Microstructure and wear behaviour of laser cladded γ-Niss/Mo2Ni3Si coating. Surface Engineering Volume 36 (2020) – Issue 12: Special Issue: Laser. https://doi.org/10.1080/02670844.2019.1586301
[5] Dong, H, Surface engineering of light alloys: aluminum, magnesium and titanium alloys. Boca Raton, (2010) CRC Press. https://doi.org/10.1533/9781845699451
[6] S. Mridha and S. Dyuti, Wear Behavior of Modified Surface Layer Produced by TIG Melting of Preplaced Ti Powder in Nitrogen Environment. Advanced Material Research, 264–265, (2011) 1421–1426. https://doi.org/10.4028/www.scientific.net/AMR.264-265.1421
[7] K. A. Bello, M. A. Maleque, A. A. Adebisi and A. Dube, Preparation and characterization of TIG-alloyed hybrid composite coatings for high-temperature tribological applications. Int. J. Surf. Eng. Coatings, 94 (2016) 211–221. https://doi.org/10.1080/00202967.2016.1182727
[8] Karin Graf, Ana Sofia Clímaco Monteiro D’Oliveira, PTA hard facing of Nb/Al coatings. Technical Papers • Soldag. Insp, 17(2) (2012) 158-165. https://doi.org/10.1590/S0104-92242012000200009
[9] Li Ya-long, Dong Tian-shuna, Li Guo-lua, Wang Hai-doub, Fu Bin-Guoa, Zheng Xiao-donga, Zhou Xiu-kai, Microstructure and mechanical property of Ni-based thick coating remelted by gas tungsten arc. Vacuum, Volume 155 (2018) 260-269. https://doi.org/10.1016/j.vacuum.2018.05.053
[10] Wang Xinhong, Zou Zengda, Song Sili, Qu Shiyao, Microstructure and wear properties of in situ TiC/FeCrBSi composite coating prepared by gas tungsten arc welding. Wear 260 (2006) 705–710. https://doi.org/10.1016/j.wear.2005.03.018
[11] J. A. Folkes, Developments in Laser Surface Modification and Coating. Surface Coatings Technology, 63 (1994) 65–71. https://doi.org/10.1016/S0257-8972(05)80009-X
[12] S.M.H. Hojjatzadeha, A. Halvaeeb, M. Heydarzadeh Sohib, Surface alloying of AISI 1045 steel in a nitrogen environment using a gas tungsten arc process. Journal of Materials Processing Technology, 212 (2012) 2496– 2504. https://doi.org/10.1016/j.jmatprotec.2012.06.006
[13] Meng Junsheng, Ji Zesheng, Microstructure and Formation Mechanism of in-Situ TiN-TiB2 /Ni Coating by Argon Arc Cladding. Rare Metal Materials and Engineering, 47(1) (2018) 0013-0019. https://doi.org/10.1016/S1875-5372(18)30064-X
[14] M. A. Malequea, W. Saffinab, A. S Ahmed and M. Y. Ali, Fe-C-Si ternary composite coating on CP-titanium and its tribological properties. IOP Conf. Series: Materials Science and Engineering, 184 (2017) 012013. https://doi.org/10.1088/1757-899X/184/1/012013
[15] Chinmaya Kumar Sahoo, Manoj Masanta, Microstructure and mechanical properties of TiC-Ni coating onAISI304 steel produced by TIG cladding process. Journal of Materials Processing Technology, 240 (2017) 126–137. https://doi.org/10.1016/j.jmatprotec.2016.09.018
[16] M. Sharifitabar, J. Vahdati Khaki, M. Haddad Sabzevar, M. Sharifitabar, J. Vahdati Khaki, M. Haddad Sabzevar M. Sharifitabar, J. Vahdati Khaki, M. Haddad Sabzevar, M. Sharifitabar, J. Vahdati Khaki, M. Haddad Sabzevar, Microstructure and wear resistance of in-situ TiC–Al2O3 particles reinforced Fe-based coatings produced by gas tungsten arc cladding. Surface & Coatings Technology, 285 (2016) 47–56. https://doi.org/10.1016/j.surfcoat.2015.11.019
[17] X.H. Wang, S.L. Song, Z.D. Zou, S.Y. Qu, Fabricating TiC particles reinforced Fe-based composite coatings produced by GTAW multi-layers melting process. Materials Science and Engineering A, 441 (2006) 60–67. https://doi.org/10.1016/j.msea.2006.06.015
[18] Li-ping Zhao, Zong-de Liu and Bin Li, Microstructure and Grain Abrasion Properties of (Ti,W)C-Ni Cermet Cladding Layers Prepared by Tungsten Inert Gas Cladding. Applied Mechanics and Materials, Vols. 80-81 (2011)133-136. https://doi.org/10.4028/www.scientific.net/AMM.80-81.133
[19] Li-ping Zhao, Zong-de Liu, and Bin Li, Microstructure and Properties of in-situ Synthesized Composite Coating by tungsten inert gas Cladding. Advanced Materials Research, Vols. 314-316 (2011) 296-299. https://doi.org/10.4028/www.scientific.net/AMR.314-316.296
[20] R. Colaço, T. Carvalho, R. Vilar, Laser Cladding of Stellite 6 on Steel Substrates. High Temperature Chemical Processes, 3 (1994) 21-29.
[21] Ruifeng Li, Yajuan Jin, Zhuguo Li, and Kai Qi, A Comparative Study of High-Power Diode Laser and CO2 Laser Surface Hardening of AISI 1045 Steel. Journal of Materials Engineering and Performance, 23 (2014) 3085–3091. https://doi.org/10.1007/s11665-014-1146-x
[22] Jian Liu, Hao Liu, Peijian Chen, Jingbin Hao, Microstructural characterization and corrosion behaviour of AlCoCrFeNiTix high-entropy alloy coatings fabricated by laser cladding. Surface & Coatings Technology, 361 (2019) 63–74. https://doi.org/10.1016/j.surfcoat.2019.01.044
[23] Hao Liu, Jian Liu, Peijian Chen, Haifeng Yang, Jingbin Hao, and Xianhua Tian, Microstructure and Properties of AlCoCrFeNiTi High-Entropy Alloy Coating on AISI1045 Steel Fabricated by Laser Cladding. Journal of Materials Engineering and Performance, 28, (2019) 1544–1552. https://doi.org/10.1007/s11665-019-03949-9
[24] T. J. Lienert, E. D. Brandon and J. C. Lippold, Laser and electron beam welding of SiCp reinforced aluminum A-356 metal matrix composite. Scripta Materialia, 28 (1993) 1341–1346. https://doi.org/10.1016/0956-716X(93)90479-C
[25] K. Peng, H. Cui, F. Lu, X. Wu, X. Tang, S. Yao and S. Lou, Mechanical properties and wear resistance of aluminum composite welded by electron beam. Trans. Nonferrous Met. Soc. China, 21 (2011) 1925–1931. https://doi.org/10.1016/S1003-6326(11)60951-5
[26] Li Guo-lu, Li Ya-long, Dong Tian-shun, Fu Bin-Guo, Wang Hai-dou, Zheng Xiao-dong, Zhou Xiu-kai, Microstructure and interface characteristics of NiCrBSi thick coating remelted by TIG Process. Vacuum, 156 (2018) 440-448. https://doi.org/10.1016/j.vacuum.2018.07.020
[27] Li Guo-lu, Yuan Jing-min, Dong Tian-shun, Zhao Xiang-wei, Fu Bin-guo, and Shi Jiadong, Wear Resistance under Different Temperatures of NiCr-Cr3C2 Coating Remelted by Tungsten Inert Gas Arc. Journal of Materials Engineering and Performance, 29 (2020) 8013–8024. https://doi.org/10.1007/s11665-020-05254-2
[28] Guo-lu Li, Ya-long Li, Tian-shun Dong, Hai-dou Wang, Xiao-dong Zheng and Xiu-kai Zhou, Microstructure and Wear Resistance of TIG Remelted NiCrBSi Thick Coatings Advances in Materials Science and Engineering, special issue, (2018) 1-10. https://doi.org/10.1155/2018/8979678
[29] H.L. Tian, S.C.Wei, Y.X. Chen, H. Tong, Y. Liu, B.S. Xu, Surface remelting treated high velocity arc sprayed FeNiCrAlBRE coating by Tungsten Inert Gas. Physics Procedia, 50 (2013) 322 – 327. https://doi.org/10.1016/j.phpro.2013.11.051
[30] H. L. Tian, S. C. Wei, Y. X. Chen, H. Tong, Y. Liu, B. S. Xu, Microstructure and Wear Resistance of an Arc-Sprayed Fe-Based Coating After Surface Remelting Treatment. Strength of Materials, 46(2) (2014) 229-234. https://doi.org/10.1007/s11223-014-9540-z
[31] Dong Tianshun, Zheng Xiaodong, Li Yalong, Li Guolu, Zhou Xiukai, and Wang Haidou, Microstructure and Wear Resistance of FeCrBSi Plasma-Sprayed Coating Remelted by Gas Tungsten Arc Welding Process. Journal of Materials Engineering and Performance, 27 (2018) 4069–4076. https://doi.org/10.1007/s11665-018-3475-7
[32] Dong Tianshun, Zhou Xiu kai, Li Guolu, Liu Li and Wang Ran, Microstructure and corrosive wear resistance of plasma sprayed Ni-based coatings after TIG remelting. Mater. Res. Express, volume 5 Number 02 (2018). https://doi.org/10.1088/2053-1591/aaadd7
[33] M. M. Verdian, M. Salehi and K. Raeissi, Microstructure formation and properties of HVOF sprayed NiTi coatings prepared from amorphous/nanocrystalline NiTi powders. Surface Engineering, 26(2) (2010) 491-496. https://doi.org/10.1179/026708410X12593178265823
[34] M.M. Verdian, K. Raeissi, M. Salehi, Electrochemical impedance spectroscopy of HVOF-sprayed NiTi intermetallic coatings deposited on AISI 1045 steel. Journal of Alloys and Compounds, 507 (2010) 42–46. https://doi.org/10.1016/j.jallcom.2010.07.132
[35] Li Ya-long, Dong Tian-shun, Li Guo-lu, Wang Hai-dou, Fu Bin-Guo, Zheng Xiao-dong, Microstructure evolution and properties of NiCrBSi thick coating remelted by gas tungsten arc. Surface and Coatings Technology, 349 (2018) 260-271. https://doi.org/10.1016/j.surfcoat.2018.05.064
[36] Jing-min Yuan, Tian-shun Dong, Bin-guo Fu, Guo-lu Li, Li Liu, and Ran Wang, Effect of Tungsten Inert Gas Arc Remelting on Microstructure and Wear Properties of Plasma-Sprayed NiCr-Cr3C2 Coating. Journal of Materials Engineering and Performance, 28 (2019) 6320-6329. https://doi.org/10.1007/s11665-019-04350-2