Predicting the Thickness of the Hardening Coating during Diffusion Metallization of Cast Iron

Predicting the Thickness of the Hardening Coating during Diffusion Metallization of Cast Iron

Alexander Veselovsky, Irina Troyanovskaya, Valery Erofeev

Abstract. The article presents the calculations of diffusion indices of saturation of high-strength cast iron VCh 60 from powder filling. Carbide-forming elements were used as diffusers: vanadium, chromium and manganese. As a result of the research, empirical equations have been established for predicting the thickness of strengthening diffusion coatings depending on the temperature and saturation time.

Keywords
Diffusion, Coating, Saturation, Cast Iron, Carbides

Published online 1/5/2022, 5 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Alexander Veselovsky, Irina Troyanovskaya, Valery Erofeev, Predicting the Thickness of the Hardening Coating during Diffusion Metallization of Cast Iron, Materials Research Proceedings, Vol. 21, pp 51-55, 2022

DOI: https://doi.org/10.21741/9781644901755-9

The article was published as article 9 of the book Modern Trends in Manufacturing Technologies and Equipment

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] E.E. Bobylyov, I.D. Storozhenko, Diffusion metallization of carbide cutting tools as a way to improve the surface treatment quality, Journal of Physics: Conference Series. 1399(4) (2019) 044084. https://doi.org/10.1088/1742-6596/1399/4/044084
[2] P.О. Rusinov, Z.M. Blednova, Formation of the surface layers of a material with shape-memory-based tinico diffusion metallization, Materials Science Forum. 818 (2015) 3-6. https://doi.org/10.4028/www.scientific.net/MSF.818.3
[3] Y.V. Zaulychny, V.G. Hignjak, N.A. Harchenko, T.P. Hovorun, O.V. Hignjak, V.Y. Dolgikh, Influence of interatomic interaction processes on the mechanical properties of carbide coatings based on Ti, V and Cr, obtained by diffusion metallization, Journal of Nano- and Electronic Physics. 8(4) (2016) 04008. https://doi.org/10.21272/jnep.8(4(1)).04008
[4] A. Pastukhov, O. Sharaya, E. Timashov, D. Bakharev, Method of justification of machine parts hardening modes, Engineering for Rural Development. 20 (2021) 74-79. https://doi.org/10.22616/ERDev.2021.20.TF016
[5] X-J. Liu, H-C. Wang Microstructure and hardness of vanadium carbide coatings prepared by thermal diffusion process on different steel substrate, Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment. 31(1) (2010) 150-154
[6] A.A. Veselovskii, Improving the wear resistance of high-strength cast-iron gears by applying a thermodiffusional vanadium coating, Russian Engineering Research. 32(1) (2012) 45-47 https://doi.org/10.3103/S1068798X12010273
[7] O.J. Akinribide, S.O. Olusunle, S.O. Akinwamide, B.J. Babalola, P.A. Olubambi, Impact of heat treatment on mechanical and tribological behaviour of unalloyed and alloyed ductile iron, Journal of Materials Research and Technology. 14 (2021) 1809-1819 https://doi.org/10.1016/j.jmrt.2021.07.077
[8] B. Wang, F. Qiu, G.C. Barber, Y. Pan, W. Cui, R. Wang, Microstructure, wear behavior and surface hardening of austempered ductile iron, Journal of Materials, Research and Technology. 9(5) (2020) 9838-9855. https://doi.org/10.1016/j.jmrt.2020.06.076
[9] A.A. Veselovsky, R.R. Dema, O.B. Kalugina, S.P. Nefedyev, Determination of parts tolerances in friction knots of grey and nodular cast iron with thermal diffusion platings vanadium and chrome, MATEC Web of Conferences. 129 (2017) 02043. doi:10.1051/matecconf/201712902043
[10] A.I. Degula, T.P. Govorun, N.A. Kharchenko, V.G. Khyzhnyak, M.V. Karpets, O.M. Myslyvchenko, R.S. Smetanin, Investigation of the phase and chemical compositions of complex carbide coatings. Metallofizika i Noveishie Tekhnologii. 37(11) (2016) 1461-1476. https://doi.org/10.15407/mfint.37.11.1461
[11] O.I. Shinskij, V.I. Litovka, V.A. Maslyuk, V.Ya. Kurovskij, N.V. Borovik, Production of high-strength cast iron with the use of briquetted modifiers, Litejnoe Proizvodstvo. 8 (2003) 23-26.
[12] V.G. Hignjak, G.Y. Calashnicov, N.A. Harchenko, T.P. Hovorun, O.V. Hignjak, V.Y. Dolgikh, O.O. Holyshevskiy, The structure, composition and properties of nitrided alloys after diffusion metallization, Journal of Nano- and Electronic Physics. 7(4) (2015) 04033.
[13] A.A. Veselovsky, R.R. Dema, O.B. Kalugina, S.P. Nefedyev, Determination of parts tolerances in friction knots of grey and nodular cast iron with thermal diffusion platings vanadium and chrome, MATEC Web of Conferences 129 (2017) 02043 https://doi.org/10.1051/matecconf/201712902043