Model of Filling the Internal Structure of Workpiece with Curved Layers for 3D Printing
A.N. Grechukhin, V.V. Kuts
download PDFAbstract. This paper presents a solution to the problem of filling the internal structure of the workpiece with curve layer in 3D printing. A generalized model of filling the internal structure of workpiece with curve layer is designed. The results are presented for solving the problem on the example of curved layers of a conical shape with filling along a helical line. The research results can be in demand in the development of algorithms and software for technological equipment. They allow to ensure the formation of the internal structure of products in curved layers during 3D printing.
Keywords
Additive Technologies, Layer-By-Layer Synthesis, Curved Layer
Published online 1/5/2022, 6 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: A.N. Grechukhin, V.V. Kuts, Model of Filling the Internal Structure of Workpiece with Curved Layers for 3D Printing, Materials Research Proceedings, Vol. 21, pp 317-322, 2022
DOI: https://doi.org/10.21741/9781644901755-56
The article was published as article 56 of the book Modern Trends in Manufacturing Technologies and Equipment
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Burns M. Automated Fabrication: Improving Productivity in Manufacturing. -Englewood Cliffs, N.J., USA: PTR Prentice Hall, 1993. – 369 pp.
[2] Improving the quality of additive methods for forming the surfaces of odd-shaped parts with the application of parallel kinematics mechanisms Kuts V.V., Razumov M.S., Grechukhin A.N., Bychkova N.A. International Journal of Applied Engineering Research. 2016. Т. 11. № 24. С. 11832-11835.
[3] Dobroskok, V.L Rational orientation of products during their layer-by-layer shaping based on the initial triangulation 3d model [text] / V.L. Dobroskok, L.N. Abduraimov, S.I. Chernyshov // Scientific notes of the Crimean Engineering Pedagogical University. 2010. № 24. pp. 13-21.
[4] Algorithm for dividing a three-dimensional model into layers for 3D printing I. A. Gushchin, A. R. Avdeev, A. A. Shvets, A.V. Drobotov//News of TulSU. Technical sciences. 2016. Issue 11. Part 2. pp 99-105.
[5] Optimum part deposition orientation in stereolithography / S. K. Singhal, A. P. Pandey, P. M. Pandey, A. K. Nagpal // Computer-Aided Design & Applications. – 2005. – Vol. 2. – Nos. 1–4. – P. 319–328. https://doi.org/10.1080/16864360.2005.10738380
[6] Hong S. Byun. Determination of optimal build direction in rapid prototyping with variable slicing / Hong S. Byun, Kwan H. Lee // Int. J. Adv. Manuf. Technol. – 2006. – №. 28. – P. 307–313. https://doi.org/10.1007/s00170-004-2355-5
[7] Lan P.T. Determining fabrication orientations for rapid prototyping with stereolithography apparatus / S. Y. Chou, L. L. Chent, D. Gemmill // Computer- Aided Design. – 1997. – Vol. 29. – № 1. – P. 53– 62. https://doi.org/10.1016/S0010-4485(96)00049-8
[8] Massod S. H. A generic algorithm for part orientation system for complex parts in rapid prototyping / S. H. Massod, W. Rattanawong, P. Iovenitti // J. Mater. Process. Technol. – 2003. – Vol. 139. – № 1–3. – P. 110–116. https://doi.org/10.1016/S0924-0136(03)00190-0
[9] Masood S. H. A generic part orientation system based on volumetric error in rapid prototyping / S. H. Masood, W. Rattanawong // Int. J. Adv. Manuf. Technol. – 2002. – № 19. – P. 209–216. https://doi.org/10.1007/s001700200015
[10] Kuts V.V, Grechukhin A.N, Olesitsky A.V and others Algorithm for dividing a volume model into curvilinear layers for 3D printing, Fundamental and applied problems of engineering and technology 2021, pp 22-27.
[11] Grechukhin A.N, Kuts V.V, Razumov M.S and others Improving the accuracy of additive forming methods Innovation, quality and service in engineering and technology, 2018, pp 128-131.
[12] Grechukhin A.N, Kuts V.V, Razumov M.S Control of spatial orientation of robot units in the process of additive forming of products Bulletin of Voronezh state technical University, 2018, 4 pp 122-129.
[13] Grechukhin A.N, Kuts V.V, Razumov M.S Experimental determination of the cross-section parameters of a single layer in the additive forming products News of Tula state University. Technical science, 2019, 10 pp 264-270.
[14] Grechukhin A.N, Anikutin I.S, Byshkin A.S Management of space orientation of the end effector of generation of geometry system fiveaxis manufacturing machinery for additive generation of geometry MATEC Web of Conferences, 2018 Vol 7 pp 128-136 DOI 10.1051/matecconf/201822601004.
[15] Grechukhin A.N, Kuts V.V, Razumov M.S Ways to reduce the error of additive methods of forming – 2018 MATEC Web of Conferences Vol 7 pp142-150. https://doi.org/10.1051/matecconf/201822601002
[16] Grechukhin, A.N, Kuts, V.V, Oleshitskiy, A.V Development and Research of Technological Equipment that Implements Dynamic Control of Process of Additive Fabrication of Parts of Complex Spatial Shapes Based on Mechanisms with a Hybrid Layout. IOP Conference Series: Materials Science and Engineering, 2020, 709(3), 033112. https://doi.org/10.1088/1757-899X/709/3/033112
[17] Kuts, V.V., Merkulov, V.S., Grechukhin, A.N., Privalov, A.S Investigation of the process of additive formation of fusible materials using a low-power solid-state laser. IOP Conference Series: Materials Science and Engineering, 2021, 1029(1), 012010. https://doi.org/10.1088/1757-899X/1029/1/012010
[18] Grechukhin, A.N., Kuts, V.V., Razumov, M.S Solving Problem of Curved Surface Approximation by Layers with Constant and Variable Sections During Forming by Additive Methods. Lecture Notes in Mechanical Engineering, 2020, pp. 239–248. https://doi.org/10.1007/978-3-030-22041-9_28
[19] Grechukhin, A.N., Kuts, V.V., Oleshitsky, A.V Control additive error of morphogenesis with the use of hybrid layout. AIP Conference Proceedings, 2019, 2188, 020003. https://doi.org/10.1063/1.5138377
[20] Grechukhin, A.N., Privalov, A.S., Garkavtseva, P.A. Experimental studies of the process of additive electric arc forming in the environment of protective gases AIP Conference Proceedings, 2019, 2188, 020004. https://doi.org/10.1063/1.5138378
[21] Grechukhin, A.N., Kuts, V.V., Oleshitsky, A.V. Control of geometrical parameters of a single layer at additive forming of products by FDM technology. IOP Conference Series: Materials Science and Engineering, 2019, 680(1), 012004. https://doi.org/10.1088/1757-899X/680/1/012004
[22] Grechukhin, A.N., Kuts, V.V., Razumov, M.S Calculation of the controlled parameters of the 6-coordinate robot in the process of additive forming of products. Journal of Physics: Conference Series, 2019, 1210(1), 012053. https://doi.org/10.1088/1742-6596/1210/1/012053
[23] Information on https://cyber-code.ru/tochka_v_treugolnike/
