Elastomeric Composites Surface Structure Study by Scanning Electron and Atomic Force Microscopy
Yu. V. Kornev, H.H. Valiev, A.N. Vlasov, Yu. N. Karnet, N.A. Semenov
download PDFAbstract. New elastomeric composites were synthesized with filler particles from rice husk products both in micro and sub-micron sizes. The obtained composites surface structure was investigated by scanning electron and atomic force microscopy. The application as a prospective strengthening sub-micron sizes filler for the composite complexes creation with high elastic and strength properties have been shown.
Keywords
Elastomeric Composites, Rice Husk Fillers, Scanning Electron and Atomic Force Microscopy, Surface Structure, Elastic Strength Properties
Published online 1/5/2022, 4 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Yu. V. Kornev, H.H. Valiev, A.N. Vlasov, Yu. N. Karnet, N.A. Semenov, Elastomeric Composites Surface Structure Study by Scanning Electron and Atomic Force Microscopy, Materials Research Proceedings, Vol. 21, pp 255-258, 2022
DOI: https://doi.org/10.21741/9781644901755-45
The article was published as article 45 of the book Modern Trends in Manufacturing Technologies and Equipment
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] Matthews F.L., Rawlings R.D. Composite Materials: Engineering and Science. N. Y., Woodhead Publishing, 1999.-470 p.
[2] Kornev A.E., Bukanov A.M., Sheverdyayev O.N. Technology of elastomeric materials. Moscow: NPPA “Istek”, 2009.-504 p.
[3] Farzana Hussain, Mehdi Hojjati, Masami Okamoto, Russell E. Gorga Review article: Polymer matrix Nanocomposites, Processing, Manufacturing, and Application // Journal of Composite Materials. 2006. V. 40. P. 1511. https://doi.org/10.1177/0021998306067321
[4] Yanovsky Yu.G., Grigoryev F.V., Nikitina E.A., Vlasov A.N., Karnet Yu.N. Nanomechanical properties of polymer composite nanoclusters // Physical Mesomechanics. 2008. V. 11. № 5-6. P. 247-259. https://doi.org/10.1016/j.physme.2008.11.005
[5] Yanovsky Yu.G. Nanomechanics and strength of composite materials, Moscow: IPRIM RAS, 2008, -179 p.
[6] Vlasov A.N., Volkov-Bogorodsky D.B., Yanovsky Y.G., Kornev Y.V., Karnet Y.N. Mechanical properties estimation in hyperelastic composites with small disperse fillers additives // Mechanics and nanomechanics of structurally complex heterogeneous media. Successes, problems and prospects. 2015. P.219-226.
[7] Bakar R.A., Yahya R., Gan S.N. Production of high purity amorphous silica from rice husk //Procedia Chem.-2016.-V.19.-P.189-195. https://doi.org/10.1016/j.proche.2016.03.092
[8] Liu X., Chen X., Yang L.,Chen H., Tian Y., Wangn Z. A review on recent advances in the comprehensive application of rice husk ash //Res. Chem. Intermed.-2016.-V.42.-P.893-913. https://doi.org/10.1007/s11164-015-2061-y
[9] Kornev Y.V., Semenov P.E., Semenov N.A., Solyaev Y.O., Kh. Valiev Kh. Mechanical properties of elastomeric composites reinforced by particles of mineral fillers based on silicon oxide and carbon // Collection: XII All-Russian Congress on Fundamental Problems of Theoretical and Applied Mechanics – Proceedings. In 4 volumes. 2019. P. 1433-1435.
[10] Valiev H.H., Vlasov A.N., Kornev Yu.V. et al. Scanning probe microscopy of elastomers with mineral fillers //Composites from Renewable and Sustainable Materials.-London: Intechopen, 2019.-P. 39-50.
