Investigation of the Influence of Direct Metal Deposition Modes on Microstructure and Formation of Defects in Samples of Heat Resistant Alloy

Investigation of the Influence of Direct Metal Deposition Modes on Microstructure and Formation of Defects in Samples of Heat Resistant Alloy

А.V. Balyakin, E.P. Zlobin, М.А. Oleynik, Е.S. Goncharov

Abstract. The article discusses the influence of technological modes of the DMD method on the macro- and microstructure of a heat-resistant nickel-based alloy to use this technology for heat-resistant materials in the manufacture of parts for combustion chambers in gas turbine plants.

Keywords
Additive Technologies, Direct Metal Deposition, Porosity of The Material, Nickel-Based Alloy, Mechanical Properties

Published online 1/5/2022, 5 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: А.V. Balyakin, E.P. Zlobin, М.А. Oleynik, Е.S. Goncharov, Investigation of the Influence of Direct Metal Deposition Modes on Microstructure and Formation of Defects in Samples of Heat Resistant Alloy, Materials Research Proceedings, Vol. 21, pp 23-27, 2022

DOI: https://doi.org/10.21741/9781644901755-4

The article was published as article 4 of the book Modern Trends in Manufacturing Technologies and Equipment

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] Vdovin, R.A. 2019, “Improving the quality of the manufacturing process of turbine blades of the gas turbine engine”, Journal of Physics: Conference Series. https://doi.org/10.1088/1742-6596/1399/4/044035
[2] Saleil, J., Mantel, M. & Le Coze, J. 2020, “Stainless steels making: History of production processes developments. Part III. Casting methods, hot and cold forming processes”, Materiaux et Techniques, vol. 108, no. 1. https://doi.org/10.1051/mattech/2020015
[3] Balaykin, A.V., Bezsonov, K.A., Nekhoroshev, M.V. & Shulepov, A.P. 2018, “Developing Parametric Models for the Assembly of Machine Fixtures for Virtual Multiaxial CNC Machining Centers”, IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899X/302/1/012009
[4] Balyakin, A.V., Dobryshkina, E.M., Vdovin, R.A. & Alekseev, V.P. 2018, “Rapid Prototyping Technology for Manufacturing GTE Turbine Blades”, IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899X/327/2/022025
[5] Sotov, A.V., Agapovichev, A.V., Smelov, V.G., Kokareva, V.V., Dmitrieva, M.O., Melnikov, A.A., Golanov, S.P. & Anurov, Y.M. 2020, “Investigation of the IN-738 superalloy microstructure and mechanical properties for the manufacturing of gas turbine engine nozzle guide vane by selective laser melting”, International Journal of Advanced Manufacturing Technology, vol. 107, no. 5-6, pp. 2525-2535. https://doi.org/10.1007/s00170-020-05197-x
[6] Committee on Propulsion and Energy Systems to Reduce Commercial Aviation Carbon Emissions, Aeronautics and Space Engineering Board, Division on Engineering and Physical Sciences & National Academies of Sciences, Engineering,and Medicine 2016, “Commercial aircraft propulsion and energy systems research: Reducing global carbon emissions” in Commercial Aircraft Propulsion and Energy Systems Research: Reducing Global Carbon Emissions, pp. 1-122.
[7] Tresa M., Pollock and Sammy T. 2006, “Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and Properties”, Journal of Propulsion and Power, vol.22:2, pp. 361-374. https://doi.org/10.2514/1.18239
[8] Winstone, M. and J. Brooks, Advanced high temperature materials: Aeroengine fatigue. Ciência & Tecnologia dos Materiais, 2008. 20(1-2): p. 15-24.
[9] Helmink, R.C., et al., Advanced superalloys and tailored microstructures for integrally cast turbine wheels. 2000: Superalloys 2000 (Ninth international symposium). p. 171-179. https://doi.org/10.7449/2000/Superalloys_2000_171_179
[10] Das, N., Advances in nickel-based cast superalloys. Transactions of the Indian Institute of Metals, 2010. 63(2-3): p. 265-274. https://doi.org/10.1007/s12666-010-0036-7
[11] Turichin, G.A., Zemlyakov, E.V., Pozdeeva, E.Y., Tuominen, J. & Vuoristo, P. 2012, “Technological possibilities of laser cladding with the help of powerful fiber lasers”, Metal Science and Heat Treatment, vol. 54, no. 3-4, pp. 139-144. https://doi.org/10.1007/s11041-012-9470-y
[12] Leyens, C. & Beyer, E. 2015, “Innovations in laser cladding and direct laser metal deposition” in Laser Surface Engineering: Processes and Applications, pp. 181-192. https://doi.org/10.1016/B978-1-78242-074-3.00008-8
[13] Ocylok, S., Alexeev, E., Mann, S., Weisheit, A., Wissenbach, K. & Kelbassa, I. 2014, “Correlations of melt pool geometry and process parameters during laser metal deposition by coaxial process monitoring”, Physics Procedia, pp. 228. https://doi.org/10.1016/j.phpro.2014.08.167
[14] Sui S, Chen J, Ming X, Zhang SP, Lin X, Huang WD (2017) The failure mechanism of 50% laser additive manufactured Inconel 718 and the deformation behavior of Laves phases during a tensile process. Int J Adv Manuf Technol 91:2733–2740. https://doi.org/10.1007/s00170-016-9901-9
[15] Ma MM, Wang Z, Zeng XY (2015) Effect of energy input on microstructural evolution of direct laser fabricated IN718 alloy. Mater Charact 106:420–427. https://doi.org/10.1016/j.matchar.2015.06.027