Theoretical Justification of Coating Adhesion during Gas-Thermal Spraying

Theoretical Justification of Coating Adhesion during Gas-Thermal Spraying

Yuri A. Kuznetsov, Michael F. Selemenev, Igor N. Kravchenko, Alexander V. Spasibin, Grigory B. Pankov

download PDF

Abstract.The article provides a brief overview of modern methods of thermal spraying. Particular attention is paid to high-speed flame spraying. The theoretical substantiation of the adhesion of coatings formed on machine parts using the methods of thermal spraying is presented.

Keywords
Gas-Thermal, High-Speed Spraying, Coating, Adhesion Energy, Particle

Published online 1/5/2022, 8 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Yuri A. Kuznetsov, Michael F. Selemenev, Igor N. Kravchenko, Alexander V. Spasibin, Grigory B. Pankov, Theoretical Justification of Coating Adhesion during Gas-Thermal Spraying, Materials Research Proceedings, Vol. 21, pp 161-168, 2022

DOI: https://doi.org/10.21741/9781644901755-29

The article was published as article 29 of the book Modern Trends in Manufacturing Technologies and Equipment

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] Puchin E.A. Machine repair technology: textbook for universities / E.A. Puchin, N.A. Ochkovsky, V.S. Novikov. – M .: KolosS, 2011 .– 488 p.
[2] Baldaev L.Kh. Thermal spraying: textbook for universities / L.Kh. Baldaeva, V.N. Borisov, V.A. Vakhalin. – M .: Market DS, 2007 .– 344 p.
[3] Goncharov V.S., Guryanov A.N., Domashenko Yu.V. Formation of supersonic flows in gas-flame burners. 6th International Conference “Films and Coatings 2001”. – SPb .: Publishing house of SPbSU, 2001.S. 48-52.
[4] Alkhimov A.P., Klinkov S.V., Kosarev V.F. and others. Cold gas-dynamic spraying. Theory and Practice / Ed. V.M. Fomin. – M .: FIZMATLIT, 2010 .– 536 p.
[5] Klinkov S.V., Kosarev V.F. Measurements of cold spray deposition efficiency // J. of Thermal Spray Technology. 2006. Vol. 15.No. 3. P. 364-371. https://doi.org/10.1361/105996306X124365
[6] Dykhuizen R. C., Smith M. F. Gas dynamic principles of spray // J. of Thermal Spray Technology. 1998. Vol. 7.No 2.P. 205-212. https://doi.org/10.1361/105996398770350945
[7] Microstructural characteristics of cold-sprayed nanostructured WC – Co coatings / R.S. Lima. J. Karthikeyan, C.M. Kay et. al. Thin Solid Films. 2002. Vol. 416. P. 129-135. https://doi.org/10.1016/S0040-6090(02)00631-4
[8] Van Steenkiste T.N. Smith J.R. Evaluation of coatings produced via kinetic and cold spray processes // J. of Thermal Spray Technology. 2004. Vol. 13.No. 2.P. 274-282. https://doi.org/10.1361/10599630419427
[9] Helfritch D. Champagne V. Optimal panicle size for the cold spray process / U.S. Army Research Lab. Aberdeen Proving Ground, MD // Building on 100 Years of Success: proc. of the Intern. Thermal Spray Conf. (Seattle, WA, USA). ASM International. 2006.
[10] Eden T., Wolfe D. E., Potter J., et al. Cr1C2-Based coatings applied by high velocity particle consolidation (HVPC) for wear resistant applications / Applied Research lab. The Pennsylvania State University: proc. of ASM Cold Spray Conf. (Akron, Ohio, USA). ASM International. 2004.
[11] Zhang D., Shipway P.H., McCartney D.G. Panicle-substrate interactions in cold gas dynamic spraying. Advancing the Science and Applying the Technology: proc. Of the Intern. Thermal Spray Conf. (Orlando, FL, USA). ASM International. 2003.
[12] Shorkin VS, Kuznetsov Yu.A., Akimochkin AV On the possibility of taking into account the composition of the coating and the nature of its interaction with the base when calculating the energy of adhesion // In the collection: Progressive technologies in transport systems. Collection of reports of the 5th Russian scientific and technical conference. Part 1. – Orenburg. IPK OSU, 2002 .– S. 171-173.
[13] Shorkin V.S., Batishchev A.N., Kuznetsov Yu.A. Analysis of the stress state of wear-resistant coatings of reconditioned parts // Mechanization and electrification of agriculture. 2003. No. 3. S. 28-30.
[14] Simon A.D. Adhesion of films and coatings. – M .: Chemistry, 1977 .– 352 p.
[15] Leibfried G. Microscopic theory of mechanical and thermal properties of crystals. – M.-L .: State. ed.- in f.-m. lit. – 312s.
[16] Small V.I. On the nonlocal theory of elasticity. // Strength and plasticity.- Moscow: Nauka, 1971.- P. 74 – 78.
[17] Tupin R.A. The theory of elasticity, taking into account moment stresses. // Mechanics / Coll. translations, 1965, No. 3.- S. 113 – 140.
[18] Shorkin V.S. Theory of elasticity of surface layers of solids. 2. Mechanics.- 1995.- S. 169-179.
[19] Gordon V.A., Tinyakova E.V., Shorkin V.S. Description of the stressed state of bodies caused by their adhesion. // Scientific and technical problems of predicting the reliability and durability of structures and methods for their solution. / 4th Intern. conf. June 26 – 28, 2001 – SPb .: “Nestor”, 2001 – S. 87 – 88
[20] Shorkin V.S. Features of elasticity of surface layers of solids. // Elasticity and inelasticity. / Materials Int. n.symp. by probl. fur. deform. tel. / Ed. Kiyko I.A., Israilova M.Sh., Brovko G.L.-M .: Moscow State University, 2001-S. 453-454.
[21] Tinyakova E.V., Shorkin V.S. Theoretical calculation of the energy of adhesion. // Films and coatings. / 6th Intern. conf. “Films and Coatings’ 2001”. Proceedings. / Ed. Klubnikina V.S.- SPb .: Publishing house of SPbSTU, 2001- S. 611- 612.
[22] Averbakh B.L. Some physical aspects of destruction: / Ed. Libovitz G. Destruction. – v.1.- M .: Mir, 1973- S. 471 – 504.
[23] Petch N. Metallographic aspects of destruction./ Libovitz G. Destruction. – v. 1- M .: Mir, 1973- S. 377 – 420.