Development the Graphical Method of Calculating Structural Elements for Fixing a Gear in a Self-Centering Chuck through the Involute

Development the Graphical Method of Calculating Structural Elements for Fixing a Gear in a Self-Centering Chuck through the Involute

Alexander S. Serkov

Abstract. The article discusses the developed graphical method of calculating the size rolls diameter and the radius of their contact with the jaws.

Keywords
Gear Manufacturing, Planetary Gears, Gearwheel Fixing, Grinding, Boring

Published online 1/5/2022, 4 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Alexander S. Serkov, Development the Graphical Method of Calculating Structural Elements for Fixing a Gear in a Self-Centering Chuck through the Involute, Materials Research Proceedings, Vol. 21, pp 140-143, 2022

DOI: https://doi.org/10.21741/9781644901755-25

The article was published as article 25 of the book Modern Trends in Manufacturing Technologies and Equipment

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] A. S. Serkov, V. B. Masyagin, L. B. Serkova, Optimizatsiya tekhnologii proizvodstva shesterney, zubchatykh kolos, satellitov, Izvestiya Tul’skogo Gosudarstvennogo Universiteta. Tekhnicheskiye Nauki. 14 (2021) 134-139.
[2] O.V. Zhed’, V.V. Kopylov, Vliyaniye formy otverstiya zubchatogo ventsa na yego predvaritel’noye napryazhonnoye sostoyaniye pri sborke s bazovoy detal’yu Chast’ 1, Gruzovik. 12 (2017) 14 -15.
[3] O.V. Zhed’, V.V. Kopylov, Vliyaniye formy otverstiya zubchatogo ventsa na yego predvaritel’noye napryazhonnoye sostoyaniye pri sborke s bazovoy detal’yu Chast’ 2, Gruzovik.1 (2018) 18-22.
[4] V.A. Rogov, O.V. Zhed’, Vliyaniye predvaritel’nogo napryazhonnogo sostoyaniya zub-chatogo ventsa vsledstviye natyaga s bazovoy detal’yu v raschotakh na izgibnuyu prochnost’ zuba, Tekhnologiya mashinostroyeniya.8 (2018) 31–39.
[5] O. Zhed, A.Koshelenko, K. Khishova, The effect of the stressed state of the ring gear due to interference with the base part in calculating the flexural strength of the tooth, IOP Conference Series: Materials Science and Engineering, 709 (2020) 022035-1–022035-8. https://doi.org/10.1088/1757-899X/709/2/022035
[6] A. S. Serkov, I. I. Sayfulin, O.V. Palina, Snizheniye sebestoimosti shlifovaniya posadochnykh otverstiy i tortsov tsilindricheskikh pryamozubykh zubchatykh koles za schot vnedreniya universal’noy osnastki, Innovatsii, kachestvo i servis v tekhnike i tekhnologiyakh, Kursk, (2017) 323–328.
[7] A.S. Serkov, L.B. Antropova, Vnedreniya universal’noy osnastki v operatsiyu shlifovaniya tsentral’nykh otverstiy tsilindricheskikh pryamozubykh zubchatykh kolos, Metrologiya, standartizatsiya i upravleniye kachestvom, Omsk (2018) 105–108.
[8] A.S. Serkov, L.B. Antropova, Shlifovaniye tsentral’nogo otverstiya tsilindricheskogo pryamozubogo zubchatogo kolesa s pomoshch’yu universal’noy osnastki, Problemy effektivnogo ispol’zovaniya nauchnogo potentsiala obshchestva, Sterlitamak, 3 (2019), 178–181.
[9] A.S. Serkov, L.B. Antropova, Obrabotka otverstiya i tortsa tsilindricheskogo pryamozubogo zubchatogo kolesa s pomoshch’yu universal’noy osnastki metodom shlifova-niya, Nauchnyye revolyutsii: sushchnost’ i rol’ v razvitii nauki i tekhniki, Sterlitamak, 1 (2019) 33–36.
[10] A.S. Serkov, L.B. Antropova, S.F. Yeletskaya, Primeneniye universal’nykh trokhkulachkovykh patronov dlya shlifovaniya otverstiy v tsilindricheskikh pryamozubykh zubchatykh kolos, Metrologiya, standartizatsiya i upravleniye kachestvom, Omsk, (2019) 81–84.
[11] A.S. Serkov, Vnedreniye universal’noy osnastki v protsess shlifovaniya otverstiya i tortsa zagotovki satellita, Izvestiya Tul’skogo Gosudarstvennogo Universiteta, Tekhnicheskiye Nauki, 4 (2020) 316-320.
[12] A.S. Serkov, L.B. Serkova, YU.Ye. Zhdanova, V.B. Masyagin, Vnedreniye universal’noy osnastki v protsess shlifovaniye otverstiya i tortsa zagotovki satellita, Molodozh’ i sistemnaya modernizatsiya strany: sbornik nauchnykh statey 5-y Mezhdunarod-noy nauchnoy konferentsii studentov i molodykh uchonykh, Kursk, (2020), 320-323.
[13] Information on https://www.avtomash.ru/gur/2005/20050244.htm
[14] Information on https://www.avtomash.ru/gur/2004/20041246.htm
[15] A.A. Malikov, G.V. Malakhov, A.V. Mikhaylov, Opredeleniye parametrov zubchatogo ventsa zagotovok s predvaritel’no oformlennymi zub’yami, Izvestiya Tul’skogo Gosudarstvennogo Universiteta, Tekhnicheskiye Nauki, 8 (2017) 344-353.
[16] KH. L. Bolotin, F.P. Kostromin, Stanochnyye prisposobleniya, M.: Mashinostroyeniye, (1973)